HP AT-30533 Low current, high performance npn silicon bipolar transistor Datasheet

Low Current, High Performance
NPN Silicon Bipolar Transistor
Technical Data
AT-30511
AT-30533
Features
Description
• High Performance Bipolar
Transistor Optimized for
Low Current, Low Voltage
Operation
• 900 MHz Performance:
AT-30511: 1.1 dB NF, 16 dB GA
AT-30533: 1.1 dB NF, 13 dB GA
• Characterized for End-OfLife Battery Use (2.7 V)
• SOT-23 and SOT-143 SMT
Plastic Packages
• Tape-And-Reel Packaging
Option Available[1]
Hewlett-Packard’s AT-30511 and
AT-30533 are high performance
NPN bipolar transistors that have
been optimized for maximum fT at
low voltage operation, making
them ideal for use in battery
powered applications in wireless
markets. The AT-30533 uses the 3
lead SOT-23, while the AT-30511
places the same die in the higher
performance 4 lead SOT-143. Both
packages are industry standard,
and compatible with high volume
surface mount assembly
techniques.
Outline Drawing
EMITTER COLLECTOR
305
BASE
EMITTER
SOT-143 (AT-30511)
COLLECTOR
305
BASE
The 3.2 micron emitter-to-emitter
pitch and reduced parasitic design
of these transistors yields
extremely high performance
products that can perform a multiplicity of tasks. The 5 emitter
finger interdigitated geometry
yields an extremely fast transistor
with high gain and low operating
currents.
Optimized performance at 2.7 V
makes these devices ideal for use
in 900 MHz, 1.8 GHz, and 2.4 GHz
battery operated systems as an
LNA, gain stage, buffer, oscillator,
or active mixer. Typical amplifier
designs at 900 MHz yield 1.3 dB
noise figures with 13 dB or more
associated gain at a 2.7 V, 1 mA
bias. Voltage breakdowns are high
enough for use at 5 volts. High
gain capability at 1 V, 1 mA makes
these devices a good fit for
900␣ MHz pager applications.
The AT-3 series bipolar transistors
are fabricated using an optimized
version of Hewlett- Packard’s
10␣ GHz f T, 30 GHz fMAX SelfAligned-Transistor (SAT) process.
The die are nitride passivated for
surface protection. Excellent
device uniformity, performance
and reliability are produced by the
use of ion-implantation, selfalignment techniques, and gold
metalization in the fabrication of
these devices.
EMITTER
SOT-23 (AT-30533)
Note:
1. Refer to “Tape-and-Reel Packaging for
Semiconductor Devices”.
4-23
5965-8918E
AT-30511, AT-30533 Absolute Maximum Ratings
Symbol
VEBO
VCBO
VCEO
IC
PT
Tj
TSTG
[1]
Parameter
Units
Emitter-Base Voltage
V
Collector-Base Voltage
V
Collector-Emitter Voltage
V
Collector Current
mA
Power Dissipation[2] [3]
mW
Junction Temperature
°C
Storage Temperature
°C
[2]
Absolute Maximum
1.5
11
5.5
8
100
150
-65 to 150
Thermal Resistance :
θ jc = 550°C/W
Notes:
1. Operation of this device above any one of these parameters may cause permanent
damage.
2. TMounting Surface = 25°C.
3. Derate at 1.82 mW/°C for TC > 95°C.
Electrical Specifications, TA = 25°C
AT-30511
Symbol
NF
Parameters and Test Conditions
Units
Min
Typ
AT-30533
Max
Min
Typ
Max
Noise Figure
VCE = 2.7 V, IC = 1 mA
f = 0.9 GHz
dB
Associated Gain
VCE = 2.7 V, IC = 1 mA
f = 0.9 GHz
dB
hFE
Forward Current
Transfer Ratio
VCE = 2.7 V
IC = 1 mA
-
ICBO
Collector Cutoff Current
VCB = 3 V
µA
0.03
0.2
0.03
0.2
IEBO
Emitter Cutoff Current
VEB = 1 V
µA
0.1
1.5
0.1
1.5
GA
[1]
1.1
[1]
14
[1]
70
VCC
W = 10 L = 1860
W = 10 L = 1860
25 Ω
1000 pF
1000 pF
W = 10 L = 1000
W = 30 L = 100
TEST CIRCUIT
BOARD MATL = 0.062" FR-4 (ε = 4.8)
DIMENSIONS IN MILS
W = 30 L = 100
W = 10 L = 1025
TEST CIRCUIT A: W = 20 L = 100
TEST CIRCUIT B: W = 20 L = 200 x 2
NOT TO SCALE
Figure 1. Test Circuit for Noise Figure and Associated Gain. This Circuit is a
Compromise Match Between Best Noise Figure, Best Gain, Stability, a Practical,
Synthesizable Match, and a Circuit Capable of Matching Both the AT-305 and
AT-310 Geometries.
4-24
[2]
1.1
[2]
16
11
300
Notes:
1. Test circuit B, Figure 1. Numbers reflect device performance de-embedded from circuit losses.
Input loss = 0.4 dB; output loss = 0.4 dB.
2. Test circuit A, Figure 1. Numbers reflect device performance de-embedded from circuit losses.
Input loss = 0.4 dB; output loss = 0.4 dB.
VBB
[1]
1.4
[2]
1.4
[2]
13
70
300
AT-30511, AT-30533 Characterization Information, TA = 25°C
AT-30511 AT-30533
Symbol
Parameters and Test Conditions
P1dB
G1dB
IP3
|S21|E2
CCB
Units
Typ
Typ
Power at 1 dB Gain Compression (opt tuning)
VCE = 2.7 V, IC = 5 mA
f = 0.9 GHz
dBm
7
7
Gain at 1 dB Gain Compression (opt tuning)
VCE = 2.7 V, IC = 5 mA
f = 0.9 GHz
dB
16.5
15
Output Third Order Intercept Point,
VCE = 2.7 V, IC = 5 mA (opt tuning)
f = 0.9 GHz
dBm
17
17
Gain in 50 Ω System; VCE = 2.7 V, IC = 1 mA
f = 0.9 GHz
dB
10
9
VCB = 3V, f = 1 MHz
pF
0.04
0.04
Collector-Base Capacitance
Typical Performance
5 mA
5 mA
Ga (dB)
1.5
1.0
20
20
AMPLIFIER NF
NF MIN.
15
Ga (dB)
2.0
NOISE FIGURE (dB)
25
25
2.5
10
15
10
1 mA
1 mA
0.5
5
5
1 mA
5 mA
0
0.5
1.0
1.5
2.0
0
2.5
0
0.5
FREQUENCY (GHz)
1.5
2.0
25
8
20
G 1dB (dBm)
5 mA
4
1.5
2.0
2.5
15
2 mA
10
FREQUENCY (GHz)
Figure 5. AT-30511 and AT-30533
Power at 1 dB Gain Compression vs.
Frequency and Current at VCE␣ = 2.7 V.
0
1.5
2.5
2
Figure 4. AT-30533 Associated Gain at
Optimum Noise Match vs. Frequency
and Current at VCE␣ = 2 .7 V.
20
5 mA
15
2 mA
10
5
5
1.0
1.0
25
2 mA
2
0.5
0.5
5 mA
6
0
0
FREQUENCY (GHz)
Figure 3. AT-30511 Associated Gain at
Optimum Noise Match vs. Frequency
and Current at VCE␣ = 2 .7 V.
10
0
0
2.5
FREQUENCY (GHz)
Figure 2. AT-30511 and AT-30533
Minimum Noise Figure and Amplifier
NF[1] vs. Frequency and Current at
VCE␣ = 2 .7 V.
P 1dB (dBm)
1.0
G 1dB (dBm)
0
0
0
0.5
1.0
1.5
2.0
2.5
FREQUENCY (GHz)
Figure 6. AT-30511 1 dB Compressed
Gain vs. Frequency and Current at
VCE␣ = 2.7 V.
0
0.5
1.0
1.5
2.0
2.5
FREQUENCY (GHz)
Figure 7. AT-30533 1 dB Compressed
Gain vs. Frequency and Current at
VCE␣ = 2.7 V.
Note:
1. Amplifier NF represents the noise figure which can be expected in a real circuit representing reasonable reflection coefficients and
including circuit losses.
4-25
AT-30511, AT-30533 Typical Performance, continued
10
25
8
20
25
20
6
4
G 1dB (dBm)
5 mA
G 1dB (dBm)
P 1dB (dBm)
5 mA
15
2 mA
10
5 mA
15
2 mA
10
2 mA
5
2
0
0
0.5
1.0
1.5
2.0
2.5
0
0.5
Figure 8. AT-30511 and AT-30533
Power at 1 dB Gain Compression vs.
Frequency and Current at VCE␣ = 5 V.
0
2.5
2.0
0
0.5
6
25
4
20
5 mA
0
1.0
1.5
2.0
2.5
FREQUENCY (GHz)
Figure 9. AT-30511 1 dB Compressed
Gain vs. Frequency and Current at
VCE␣ = 5 V.
G 1dB (dBm)
P 1dB (dBm)
1.5
FREQUENCY (GHz)
FREQUENCY (GHz)
2
1.0
Figure 10. AT-30533 1 dB Compressed
Gain vs. Frequency and Current at
VCE␣ = 5 V.
25
20
5 mA
G 1dB (dBm)
0
5
15
2 mA
10
5 mA
15
2 mA
10
2 mA
5
-2
0.5
1.0
1.5
2.0
0
2.5
0
Figure 11. AT-30511 and AT-30533
Power at 1 dB Gain Compression vs.
Frequency and Current at VCE␣ = 1 V.
2.0
20
2.0
Ga (dBm)
10
1.0
NF
0.5
50
0
100
TEMPERATURE (°C)
Figure 14. AT-30511 Noise Figure and
Associated Gain at VCE␣ = 2.7 V,
IC␣ =␣ 1␣ mA vs. Temperature in Test
Circuit, Figure 1. (Circuit Losses
De-embedded)
Ga (dBm)
2.5
1.5
0
0
0.5
Ga
15
1.5
1.0
10
NF
0
-50
0
50
2.0
2.5
Figure 13. AT-30533 1 dB Compressed
Gain vs. Frequency and Current at
VCE␣ = 1 V.
IM3 (dBc)
IM5 (dBc)
IM7 (dBc)
0
100
TEMPERATURE (°C)
Figure 15. AT-30533 Noise Figure and
Associated Gain at VCE␣ = 2.7 V,
IC␣ =␣ 1␣ mA vs. Temperature in Test
Circuit, Figure 1. (Circuit Losses
De-embedded)
4-26
1.5
0
0.5
5
1.0
FREQUENCY (GHz)
25
15
0
-50
0
2.5
2.0
2.5
Ga
5
1.5
Figure 12. AT-30511 1 dB Compressed
Gain vs. Frequency and Current at
VCE␣ = 1 V.
NOISE FIGURE (dB)
20
1.0
FREQUENCY (GHz)
FREQUENCY (GHz)
25
0.5
-20
IM3 (dBc)
0
NOISE FIGURE (dB)
-4
5
-40
-60
-80
-9
-6
-3
0
3
6
POWER PER TONE (dBm)
Figure 16. AT-30511 and AT-30533
Intermodulation Products vs. Output
Power at VCE␣ = 2 .7 V, IC␣ = 10 mA,
900␣ MHz with Optimal Tuning.
AT-30511 Typical Scattering Parameters, VCE = 1 V, IC = 1 mA, Common Emitter, ZO = 50 Ω
Freq.
GHz
Mag
S11
Ang
0.1
0.5
0.9
1.0
1.5
1.8
2.0
2.4
3.0
4.0
5.0
0.97
0.95
0.85
0.83
0.70
0.63
0.59
0.50
0.39
0.29
0.27
-5
-24
-42
-46
-67
-78
-85
-100
-122
-161
153
dB
S21
Mag
Ang
dB
S12
Mag
Ang
Mag
10.84
10.51
9.96
9.66
8.71
8.06
7.75
6.73
5.58
3.97
2.64
3.48
3.35
3.15
3.04
2.73
2.53
2.44
2.17
1.90
1.58
1.36
175
155
137
133
113
102
96
84
67
45
25
-39.42
-25.87
-21.46
-20.71
-18.44
-17.69
-17.27
-16.79
-16.32
-15.87
-15.47
0.01
0.05
0.08
0.09
0.12
0.13
0.14
0.14
0.15
0.16
0.17
86
72
61
58
46
41
37
32
27
20
20
0.99
0.95
0.92
0.91
0.84
0.80
0.77
0.73
0.68
0.63
0.61
S22
Ang
-2
-14
-24
-26
-36
-40
-43
-48
-53
-63
-72
30
AT-30511 Typical Noise Parameters,
Common Emitter, ZO = 50 Ω, 1 V, IC = 1 mA
ΓOPT
Freq
GHz
Fmin[1]
dB
Mag
Ang
0.5[2]
0.9
1.8
2.4
0.3
0.4
0.9
1.3
0.96
0.92
0.83
0.76
10
19
43
60
20
GAIN (dB)
Rn
1.49
1.33
0.98
0.74
MSG
MAG
10
S21
0
Notes:
1. Matching constraints may make Fmin values associated with high |Γopt| values
unachievable in physical circuits. See Fig. 2 for expected performance.
2. 0.5 GHz noise parameter values are extrapolated, not measured.
0
1
MSG
2
3
5
4
FREQUENCY (GHz)
Figure 17. AT-30511 Gains vs.
Frequency at VCE␣ = 1 V, IC␣ = 1 mA.
AT-30533 Typical Scattering Parameters, VCE = 1 V, IC = 1 mA, Common Emitter, ZO = 50 Ω
Freq.
GHz
Mag
S11
Ang
0.1
0.5
0.9
1.0
1.5
1.8
2.0
2.4
3.0
4.0
5.0
0.95
0.91
0.77
0.73
0.55
0.46
0.41
0.30
0.17
0.02
0.12
-5
-25
-41
-45
-62
-71
-76
-85
-95
-139
61
dB
S21
Mag
Ang
dB
S12
Mag
Ang
Mag
10.90
10.32
9.44
9.03
7.75
6.94
6.51
5.45
4.26
2.71
1.56
3.51
3.28
2.97
2.83
2.44
2.22
2.12
1.87
1.63
1.37
1.20
174
150
128
124
102
91
85
73
57
37
19
-38.36
-25.08
-20.95
-20.21
-18.13
-17.33
-16.84
-16.05
-14.80
-12.58
-10.14
0.01
0.06
0.09
0.10
0.12
0.14
0.14
0.16
0.18
0.24
0.31
87
73
63
61
54
51
50
49
49
48
45
0.99
0.95
0.89
0.88
0.80
0.77
0.74
0.71
0.68
0.65
0.62
S22
Ang
-3
-14
-24
-25
-33
-36
-38
-41
-46
-57
-69
30
AT-30533 Typical Noise Parameters,
Common Emitter, ZO = 50 Ω, 1 V, IC = 1 mA
ΓOPT
Fmin[1]
dB
Mag
Ang
0.5[2]
0.9
1.8
2.4
0.3
0.4
0.9
1.3
0.94
0.89
0.75
0.65
7
16
43
65
Rn
1.02
0.86
0.58
0.38
Notes:
1. Matching constraints may make Fmin values associated with high |Γopt| values
unachievable in physical circuits. See Fig. 2 for expected performance.
2. 0.5 GHz noise parameter values are extrapolated, not measured.
4-27
GAIN (dB)
20
Freq
GHz
MSG
MAG
10
S21
0
0
1
MSG
2
3
4
5
FREQUENCY (GHz)
Figure 18. AT-30533 Gains vs.
Frequency at VCE␣ = 2 .7 V, IC␣ = 1 mA.
AT-30511 Typical Scattering Parameters, VCE = 2.7 V, IC = 1 mA, Common Emitter, ZO = 50 Ω
Freq.
GHz
Mag
S11
Ang
0.1
0.5
0.9
1.0
1.5
1.8
2.0
2.4
3.0
4.0
5.0
0.97
0.95
0.86
0.84
0.72
0.65
0.61
0.52
0.41
0.30
0.26
-5
-23
-39
-43
-63
-73
-80
-93
-114
-150
165
dB
S21
Mag
Ang
dB
S12
Mag
Ang
Mag
S22
Ang
10.88
10.58
10.09
9.83
8.94
8.32
8.06
7.06
5.92
4.35
3.06
3.50
3.38
3.20
3.10
2.80
2.60
2.53
2.25
1.98
1.65
1.42
175
156
139
135
115
105
99
86
70
48
28
-40.13
-26.71
-22.28
-21.51
-19.15
-18.28
-17.83
-17.29
-16.72
-16.13
-15.65
0.01
0.05
0.08
0.08
0.11
0.12
0.13
0.14
0.15
0.16
0.16
86
74
63
60
49
43
40
35
30
23
22
0.999
0.96
0.93
0.92
0.85
0.82
0.79
0.75
0.70
0.66
0.63
-2
-13
-23
-25
-34
-38
-41
-46
-51
-61
-69
30
AT-30511 Typical Noise Parameters,
Common Emitter, ZO = 50 Ω, 2.7 V, IC = 1 mA
ΓOPT
Freq
GHz
Fmin[1]
dB
Mag
Ang
0.5[2]
0.9
1.8
2.4
0.3
0.4
0.9
1.3
0.96
0.92
0.83
0.76
10
19
43
60
20
GAIN (dB)
Rn
1.49
1.33
0.98
0.74
MSG
MAG
10
S21
0
Notes:
1. Matching constraints may make Fmin values associated with high |Γopt| values
unachievable in physical circuits. See Fig. 2 for expected performance.
2. 0.5 GHz noise parameter values are extrapolated, not measured.
0
1
2
4
3
5
FREQUENCY (GHz)
Figure 19. AT-30511 Gains vs.
Frequency at VCE␣ = 2 .7 V, IC␣ = 1 mA.
AT-30533 Typical Scattering Parameters, VCE = 2.7 V, IC = 1 mA, Common Emitter, ZO = 50 Ω
Freq.
GHz
Mag
0.1
0.5
0.9
1.0
1.5
1.8
2.0
2.4
3.0
4.0
5.0
0.95
0.92
0.78
0.75
0.58
0.49
0.44
0.33
0.21
0.05
0.09
S11
Ang
-5
-23
-39
-42
-59
-66
-71
-79
-87
-88
47
dB
S21
Mag
Ang
dB
S12
Mag
Ang
Mag
10.76
10.21
9.42
9.04
7.83
7.04
6.64
5.59
4.40
2.87
1.72
3.45
3.24
2.96
2.83
2.46
2.25
2.15
1.90
1.66
1.39
1.22
174
151
130
126
105
94
88
76
60
40
22
-39.49
-26.05
-21.78
-21.05
-18.88
-18.08
-17.58
-16.77
-15.50
-13.20
-10.67
0.01
0.05
0.08
0.09
0.11
0.12
0.13
0.15
0.17
0.22
0.29
87
74
64
63
55
53
52
51
51
52
49
0.999
0.95
0.91
0.90
0.83
0.79
0.77
0.74
0.71
0.68
0.66
AT-30533 Typical Noise Parameters,
S22
Ang
-2
-13
-22
-23
-31
-34
-36
-39
-44
-54
-66
30
Common Emitter, ZO = 50 Ω, 2.7 V, IC = 1 mA
ΓOPT
Freq
GHz
Fmin[1]
dB
Mag
Ang
0.5[2]
0.9
1.8
2.4
0.3
0.4
0.9
1.3
0.94
0.89
0.75
0.65
7
16
43
65
Rn
Notes:
1. Matching constraints may make Fmin values associated with high |Γopt| values
unachievable in physical circuits. See Fig. 2 for expected performance.
2. 0.5 GHz noise parameter values are extrapolated, not measured.
4-28
GAIN (dB)
1.02
0.88
0.58
0.38
20
MSG
MAG
10
0
MSG
S21
0
1
2
3
4
5
FREQUENCY (GHz)
Figure 20. AT-30511- Gains vs.
Frequency at VCE␣ = 2 .7 V, IC␣ = 1 mA.
AT-30511 Typical Scattering Parameters, VCE = 2.7 V, IC = 5 mA, Common Emitter, ZO = 50 Ω
Freq.
GHz
Mag
S11
Ang
0.1
0.5
0.9
1.0
1.5
1.8
2.0
2.4
3.0
4.0
5.0
0.88
0.70
0.49
0.46
0.30
0.24
0.21
0.16
0.13
0.15
0.21
-11
-48
-72
-77
-100
-112
-120
-140
-172
137
106
dB
S21
Mag
Ang
dB
S12
Mag
Ang
Mag
22.49
20.42
17.77
17.09
14.44
13.10
12.31
10.94
9.18
7.03
5.44
13.32
10.49
7.73
7.15
5.27
4.52
4.13
3.52
2.88
2.25
1.87
169
134
111
107
89
81
76
67
55
38
22
-40.50
-28.45
-25.24
-24.70
-22.62
-21.65
-21.05
-20.01
-18.55
-16.57
-14.88
0.01
0.04
0.05
0.06
0.07
0.08
0.09
0.10
0.12
0.15
0.18
83
64
57
55
53
52
52
50
48
44
39
0.97
0.82
0.70
0.69
0.62
0.59
0.58
0.57
0.55
0.53
0.52
S22
Ang
-5
-22
-30
-31
-35
-37
-39
-42
-46
-55
-64
30
AT-30511 Typical Noise Parameters,
Common Emitter, ZO = 50 Ω, 2.7 V, IC = 5 mA
MSG
ΓOPT
Freq
GHz
Fmin[1]
dB
Mag
Ang
0.5[2]
1.1
1.2
1.5
1.8
0.77
0.71
0.60
0.51
9
18
45
65
0.9
1.8
2.4
20
GAIN (dB)
Rn
1.10
0.96
0.66
0.47
0
Notes:
1. Matching constraints may make Fmin values associated with high |Γopt| values
unachievable in physical circuits. See Fig. 2 for expected performance.
2. 0.5 GHz noise parameter values are extrapolated, not measured.
S21
10
0
1
MAG
2
3
5
4
FREQUENCY (GHz)
Figure 21. AT-30511 Gains vs.
Frequency at VCE␣ = 2.7 V, IC␣ = 5 mA.
AT-30533 Typical Scattering Parameters, VCE = 2.7 V, IC = 5 mA, Common Emitter, ZO = 50 Ω
Freq.
GHz
0.1
0.5
0.9
1.0
1.5
1.8
2.0
2.4
3.0
4.0
5.0
S11
Mag
Ang
0.84
0.57
0.37
0.34
0.23
0.20
0.19
0.17
0.15
0.15
0.17
-12
-39
-46
-46
-43
-38
-35
-27
-17
-2
11
dB
S21
Mag
Ang
dB
S12
Mag
Ang
Mag
S22
Ang
22.26
18.54
14.97
14.20
11.24
9.85
9.05
7.70
6.12
4.30
3.07
12.98
8.46
5.60
5.13
3.65
3.11
2.84
2.43
2.02
1.64
1.42
164
121
100
96
81
73
69
61
50
34
19
-39.96
-28.03
-24.09
-23.32
-20.30
-18.88
-18.02
-16.50
-14.57
-11.90
-9.66
0.01
0.04
0.06
0.07
0.10
0.11
0.13
0.15
0.19
0.25
0.33
82
71
70
69
68
67
66
64
61
55
47
0.98
0.80
0.73
0.72
0.69
0.68
0.68
0.67
0.66
0.64
0.61
-5
-18
-22
-22
-26
-28
-30
-33
-39
-49
-61
AT-30533 Typical Noise Parameters,
30
Common Emitter, ZO = 50 Ω, 2.7 V, IC = 5 mA
ΓOPT
Freq
GHz
Fmin[1]
dB
Mag
Ang
0.5[2]
0.9
1.8
2.4
1.1
1.2
1.5
1.8
0.71
0.61
0.42
0.28
8
16
39
57
Rn
Notes:
1. Matching constraints may make Fmin values associated with high |Γopt| values
unachievable in physical circuits. See Fig. 2 for expected performance.
2. 0.5 GHz noise parameter values are extrapolated, not measured.
4-29
GAIN (dB)
0.78
0.66
0.41
0.25
20
MSG
MAG
10
0
MSG
S21
0
1
2
3
4
5
FREQUENCY (GHz)
Figure 22. AT-30533 Gains vs.
Frequency at VCE␣ = 2 .7 V, IC␣ = 5 mA.
AT-30511 Typical Scattering Parameters, VCE = 5 V, IC = 1 mA, Common Emitter, ZO = 50 Ω
Freq.
GHz
Mag
S11
Ang
0.1
0.5
0.9
1.0
1.5
1.8
2.0
2.4
3.0
4.0
5.0
0.98
0.96
0.88
0.85
0.74
0.67
0.63
0.55
0.43
0.31
0.25
-5
-21
-37
-41
-59
-69
-75
-88
-106
-138
178
dB
S21
Mag
Ang
dB
S12
Mag
Ang
Mag
10.56
10.30
9.83
9.57
8.71
8.13
7.88
6.90
5.79
4.29
3.04
3.37
3.27
3.10
3.01
2.73
2.55
2.48
2.21
1.95
1.64
1.42
175
157
139
136
116
106
100
87
71
49
29
-40.34
-26.99
-22.52
-21.75
-19.23
-18.34
-17.85
-17.23
-16.53
-15.83
-15.38
0.01
0.04
0.07
0.08
0.11
0.12
0.13
0.14
0.15
0.16
0.17
87
74
64
62
51
45
42
37
31
23
20
0.999
0.96
0.93
0.92
0.86
0.82
0.80
0.77
0.72
0.67
0.64
S22
Ang
-2
-13
-22
-24
-33
-38
-41
-45
-50
-60
-69
30
AT-30511 Typical Noise Parameters,
Common Emitter, ZO = 50 Ω, 5 V, IC = 1 mA
ΓOPT
Freq
GHz
Fmin[1]
dB
Mag
Ang
0.5[2]
0.9
1.8
2.4
0.3
0.4
0.9
1.3
0.96
0.92
0.83
0.76
10
19
43
60
20
GAIN (dB)
Rn
1.49
1.33
0.98
0.74
MSG
MAG
10
S21
0
Notes:
1. Matching constraints may make Fmin values associated with high |Γopt| values
unachievable in physical circuits. See Fig. 2 for expected performance.
2. 0.5 GHz noise parameter values are extrapolated, not measured.
0
1
2
3
5
4
FREQUENCY (GHz)
Figure 23. AT-30511 Gains vs.
Frequency at VCE␣ = 5 V, IC␣ = 1 mA.
AT-30533 Typical Scattering Parameters, VCE = 5 V, IC = 1 mA, Common Emitter, ZO = 50 Ω
Freq.
GHz
Mag
0.1
0.5
0.9
1.0
1.5
1.8
2.0
2.4
3.0
4.0
5.0
0.96
0.92
0.79
0.77
0.60
0.51
0.46
0.35
0.23
0.07
0.07
S11
Ang
-5
-22
-37
-41
-57
-64
-69
-76
-83
-85
38
dB
S21
Mag
Ang
dB
S12
Mag
Ang
Mag
10.59
10.07
9.32
8.94
7.76
7.01
6.61
5.59
4.43
2.92
1.79
3.38
3.19
2.92
2.80
2.44
2.24
2.14
1.90
1.66
1.40
1.23
174
151
131
127
106
95
89
77
61
41
23
-39.38
-26.22
-21.99
-21.21
-19.02
-18.16
-17.66
-16.85
-15.58
-13.34
-10.85
0.01
0.05
0.08
0.09
0.11
0.12
0.13
0.14
0.17
0.22
0.29
85
74
65
63
56
54
52
51
51
52
49
0.999
0.95
0.91
0.90
0.83
0.80
0.78
0.75
0.72
0.69
0.67
S22
Ang
-2
-13
-21
-23
-30
-33
-35
-39
-43
-53
-65
30
AT-30533 Typical Noise Parameters,
Common Emitter, ZO = 50 Ω, 5 V, IC = 1 mA
Fmin[1]
dB
Mag
Ang
0.5[2]
0.9
1.8
2.4
0.3
0.4
0.9
1.3
0.94
0.89
0.75
0.65
7
16
43
65
Rn
1.02
0.98
0.58
0.38
Notes:
1. Matching constraints may make Fmin values associated with high |ΓOPT| values
unachievable in physical circuits. See Figure 2 for expected performance.
2. 0.5 GHz noise parameter values are extrapolated, not measured.
4-30
20
GAIN (dB)
ΓOPT
Freq
GHz
MSG
MAG
10
S21
0
0
1
MSG
2
3
4
FREQUENCY (GHz)
Figure 24. AT-30533 Gains vs.
Frequency at VCE␣ = 5 V, IC␣ = 1 mA.
5
AT-30511 Typical Scattering Parameters, VCE = 5 V, IC = 5 mA, Common Emitter, ZO = 50 Ω
Freq.
GHz
Mag
S11
Ang
0.1
0.5
0.9
1.0
1.5
1.8
2.0
2.4
3.0
4.0
5.0
0.90
0.74
0.53
0.49
0.33
0.27
0.24
0.18
0.12
0.11
0.17
-10
-43
-66
-70
-89
-99
-105
-120
-147
154
114
dB
S21
Mag
Ang
dB
S12
Mag
Ang
Mag
22.26
20.41
17.93
17.28
14.72
13.41
12.64
11.27
9.54
7.41
5.86
12.98
10.49
7.88
7.31
5.45
4.68
4.29
3.66
3.00
2.35
1.96
170
136
113
109
91
83
78
69
57
40
24
-40.75
-28.46
-25.18
-24.53
-22.46
-21.45
-20.87
-19.79
-18.34
-16.45
-14.84
0.01
0.04
0.06
0.06
0.08
0.08
0.09
0.10
0.12
0.15
0.18
82
66
58
57
54
53
52
50
48
43
38
0.97
0.83
0.72
0.70
0.63
0.60
0.59
0.57
0.55
0.53
0.52
S22
Ang
-5
-22
-30
-31
-36
-38
-39
-42
-46
-55
-63
30
AT-30511 Typical Noise Parameters,
Common Emitter, ZO = 50 Ω, 5 V, IC = 5 mA
ΓOPT
Freq
GHz
Fmin[1]
dB
Mag
Ang
0.5[2]
0.9
1.8
2.4
1.1
1.2
1.5
1.8
0.77
0.71
0.60
0.51
9
18
45
65
MSG
20
GAIN (dB)
Rn
1.10
0.96
0.66
0.47
S21
0
Notes:
1. Matching constraints may make Fmin values associated with high |Γopt| values
unachievable in physical circuits. See Fig. 2 for expected performance.
2. 0.5 GHz noise parameter values are extrapolated, not measured.
MAG
10
0
1
2
3
5
4
FREQUENCY (GHz)
Figure 25. AT-30511 Gains vs.
Frequency at VCE␣ = 5 V, IC␣ = 5 mA.
AT-30533 Typical Scattering Parameters, VCE = 5 V, IC = 5 mA, Common Emitter, ZO = 50 Ω
Freq.
GHz
Mag
0.1
0.5
0.9
1.0
1.5
1.8
2.0
2.4
3.0
4.0
5.0
0.86
0.59
0.40
0.37
0.27
0.24
0.23
0.20
0.18
0.17
0.16
S11
Ang
-11
-37
-43
-43
-40
-37
-35
-30
-24
-14
-2
dB
S21
Mag
Ang
dB
S12
Mag
Ang
Mag
22.22
18.69
15.19
14.43
11.49
10.11
9.33
7.97
6.40
4.58
3.37
12.92
8.60
5.75
5.27
3.75
3.20
2.93
2.50
2.09
1.70
1.47
165
122
101
97
82
75
70
62
51
36
21
-40.16
-28.05
-24.14
-23.37
-20.30
-18.88
-18.05
-16.55
-14.64
-12.00
-9.83
0.01
0.04
0.06
0.07
0.10
0.11
0.13
0.15
0.19
0.25
0.32
83
72
70
70
68
67
66
64
61
54
46
0.98
0.81
0.74
0.73
0.70
0.69
0.68
0.67
0.66
0.64
0.61
S22
Ang
-5
-18
-22
-22
-26
-28
-30
-33
-38
-49
-60
30
AT-30533 Typical Noise Parameters,
Common Emitter, ZO = 50 Ω, 5 V, IC = 5 mA
Fmin[1]
dB
Mag
Ang
0.5[2]
0.9
1.8
2.4
1.1
1.2
1.5
1.8
0.71
0.61
0.42
0.28
8
16
39
57
Rn
0.78
0.66
0.41
0.25
Notes:
1. Matching constraints may make Fmin values associated with high |Γopt| values
unachievable in physical circuits. See Fig. 2 for expected performance.
2. 0.5 GHz noise parameter values are extrapolated, not measured.
4-31
20
GAIN (dB)
ΓOPT
Freq
GHz
MSG
MAG
10
0
MSG
S21
0
1
2
3
4
FREQUENCY (GHz)
Figure 26. AT-30533 Gains vs.
Frequency at VCE␣ = 5 V, IC␣ = 5 mA.
5
Ordering Information
Part Number
Increment
Comments
AT-30511-BLK
100
Bulk
AT-30511-TR1
3000
7" Reel
AT-30533-BLK
100
Bulk
AT-30533-TR1
3000
7" Reel
Package Dimensions
SOT-23 Plastic Package
1.02 (0.040)
0.89 (0.035)
0.54 (0.021)
0.37 (0.015)
C
PACKAGE
MARKING
CODE
1.40 (0.055)
1.20 (0.047)
XXX
B
2.65 (0.104)
2.10 (0.083)
E
2.04 (0.080)
1.78 (0.070)
0.60 (0.024)
0.45 (0.018)
TOP VIEW
3.06 (0.120)
2.80 (0.110)
0.152 (0.006)
0.066 (0.003)
1.02 (0.041)
0.85 (0.033)
0.69 (0.027)
0.45 (0.018)
0.10 (0.004)
0.013 (0.0005)
SIDE VIEW
END VIEW
DIMENSIONS ARE IN MILLIMETERS (INCHES)
SOT-143 Plastic Package
0.92 (0.036)
0.78 (0.031)
PACKAGE
MARKING
CODE
E
C
1.40 (0.055)
1.20 (0.047)
XXX
B
2.65 (0.104)
2.10 (0.083)
E
0.60 (0.024)
0.45 (0.018)
2.04 (0.080)
1.78 (0.070)
0.54 (0.021)
0.37 (0.015)
0.15 (0.006)
0.09 (0.003)
3.06 (0.120)
2.80 (0.110)
1.02 (0.041)
0.85 (0.033)
0.10 (0.004)
0.013 (0.0005)
0.69 (0.027)
0.45 (0.018)
DIMENSIONS ARE IN MILLIMETERS (INCHES)
4-32
Similar pages