Intersil ISL60002CIH325Z-TK Precision, low noise fga voltage reference Datasheet

ISL60002
®
Data Sheet
May 4, 2009
Precision Low Power FGA™ Voltage
References
FN8082.16
Features
The ISL60002 FGA™ voltage references are very high
precision analog voltage references fabricated in Intersil's
proprietary Floating Gate Analog technology and feature low
supply voltage operation at ultra-low 350nA operating
current.
Additionally, the ISL60002 family features guaranteed initial
accuracy as low as ±1.0mV and 20ppm/°C temperature
coefficient. The initial accuracy and temperature stability
performance of the ISL60002 family, plus the low supply
voltage and 350nA power consumption, eliminates the need
to compromise thermal stability for reduced power
consumption making it an ideal companion to high
resolution, low power data conversion systems.
• Reference Voltages . . . 1.024V, 1.2V, 1.25V, 1.8V, 2.048V,
2.5V, 2.6V, 3.0V and 3.3V
• Absolute Initial Accuracy Options. . . . . . .±1.0mV, ±2.5mV
and ±5.0mV
• Supply Voltage Range
- ISL60002-10, -11, -12, -18, -20, -25 . . . . . . 2.7V to 5.5V
- ISL60002-26 . . . . . . . . . . . . . . . . . . . . . . . . 2.8V to 5.5V
- ISL60002-30 . . . . . . . . . . . . . . . . . . . . . . . . 3.2V to 5.5V
- ISL60002-33 . . . . . . . . . . . . . . . . . . . . . . . . 3.5V to 5.5V
• Ultra-Low Supply Current. . . . . . . . . . . . . . . . . . 350nA typ
• Low 20ppm/°C Temperature Coefficient
• ISOURCE and ISINK = 7mA
• ISOURCE and ISINK = 20mA for ISL60002-33 only
Pinout
• ESD Protection. . . . . . . . . . . 5500V (Human Body Model)
ISL60002
(3 LD SOT-23)
TOP VIEW
• Standard 3 Ld SOT-23 Packaging
VIN 1
3
GND
VOUT 2
• Operating Temperature Range
- ISL60002-10, -11, -12, -18, -20, -25, -26, -30
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-40°C to +85°C
- ISL60002-33 . . . . . . . . . . . . . . . . . . . . . -40°C to +105°C
• Pb-Free (RoHS Compliant)
Applications
Pin Descriptions
PIN NUMBER
PIN NAME
1
VIN
2
3
• High Resolution A/Ds and D/As
DESCRIPTION
• Digital Meters
Power Supply Input
• Bar Code Scanners
VOUT
Voltage Reference Output
• Mobile Communications
GND
Ground
• PDA’s and Notebooks
• Medical Systems
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
FGA is a trademark of Intersil Corporation. Copyright Intersil Americas Inc. 2004-2009. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
ISL60002
Table of Contents
Pinout ............................................................................................................................................................................................ 1
Pin Descriptions ............................................................................................................................................................................ 1
Typical Application......................................................................................................................................................................... 3
Ordering Information ..................................................................................................................................................................... 3
Absolute Maximum Ratings........................................................................................................................................................... 5
Electrical Specifications
ISL60002-10, VOUT = 1.024V .................................................................................................................................................. 5
ISL60002-11, VOUT = 1.200V .................................................................................................................................................. 5
ISL60002-12, VOUT = 1.250V .................................................................................................................................................. 5
ISL60002-18, VOUT = 1.800V .................................................................................................................................................. 6
ISL60002-20, VOUT = 2.048V .................................................................................................................................................. 6
ISL60002-25, VOUT = 2.500V .................................................................................................................................................. 6
ISL60002-26, VOUT = 2.600V .................................................................................................................................................. 6
ISL60002-30, VOUT = 3.000V .................................................................................................................................................. 7
ISL60002-33, VOUT = 3.300V .................................................................................................................................................. 7
Common Electrical Specifications
ISL60002 -10, -11, -12, -18, -20, and -25 ....................................................................................................................................... 8
Typical Performance Characteristic Curves
ISL60002, VOUT = 1.024V ....................................................................................................................................................... 9
ISL60002, VOUT = 1.20V ......................................................................................................................................................... 12
ISL60002, VOUT = 1.25V ......................................................................................................................................................... 15
ISL60002, VOUT = 1.8V ........................................................................................................................................................... 18
ISL60002, VOUT = 2.048V ....................................................................................................................................................... 21
ISL60002, VOUT = 2.50V ......................................................................................................................................................... 24
ISL60002, VOUT = 3.0V ........................................................................................................................................................... 27
ISL60002, VOUT = 3.3V ........................................................................................................................................................... 30
High Current Application ............................................................................................................................................................... 33
Applications Information ................................................................................................................................................................ 33
Typical Application Circuits............................................................................................................................................................ 35
2
FN8082.16
May 4, 2009
ISL60002
Typical Application
VIN = +3.0V
0.1µF
VIN
10µF
VOUT
0.001µF *
ISL60002-25
VOUT = 2.50V
GND
REF IN
ENABLE
SERIAL
BUS
SCK
SDAT
16 TO 24-BIT
A/D CONVERTER
*Also see Figure 118 in Applications Information.
Ordering Information
PART
MARKING
(Bottom)
PART NUMBER
(Note)
VOUT
(V)
GRADE
TEMP. RANGE
(°C)
PACKAGE
Tape & Reel
(Pb-free)
PKG.
DWG. #
ISL60002BIH310Z-TK*
DFB
1.024
±1.0mV, 20ppm/°C
-40 to +85
3 Ld SOT-23
P3.064
ISL60002CIH310Z-TK*
DFC
1.024
±2.5mV, 20ppm/°C
-40 to +85
3 Ld SOT-23
P3.064
ISL60002DIH310Z-TK*
DFD
1.024
±5.0mV, 20ppm/°C
-40 to +85
3 Ld SOT-23
P3.064
ISL60002BIH311Z-TK*
APM
1.200
±1.0mV, 20ppm/°C
-40 to +85
3 Ld SOT-23
P3.064
ISL60002CIH311Z-TK*
AOR
1.200
±2.5mV, 20ppm/°C
-40 to +85
3 Ld SOT-23
P3.064
ISL60002DIH311Z-TK*
AOY
1.200
±5.0mV, 20ppm/°C
-40 to +85
3 Ld SOT-23
P3.064
ISL60002BIH312Z-TK*
AOM
1.250
±1.0mV, 20ppm/°C
-40 to +85
3 Ld SOT-23
P3.064
ISL60002CIH312Z-TK*
AOS
1.250
±2.5mV, 20ppm/°C
-40 to +85
3 Ld SOT-23
P3.064
ISL60002DIH312Z-TK*
APA
1.250
±5.0mV, 20ppm/°C
-40 to +85
3 Ld SOT-23
P3.064
ISL60002BIH318Z-TK*
DEO
1.800
±1.0mV, 20ppm/°C
-40 to +85
3 Ld SOT-23
P3.064
ISL60002CIH318Z-TK*
DEP
1.800
±2.5mV, 20ppm/°C
-40 to +85
3 Ld SOT-23
P3.064
ISL60002DIH318Z-TK*
DEQ
1.800
±5.0mV, 20ppm/°C
-40 to +85
3 Ld SOT-23
P3.064
ISL60002BIH320Z-TK*
DEY
2.048
±1.0mV, 20ppm/°C
-40 to +85
3 Ld SOT-23
P3.064
ISL60002CIH320Z-TK*
DEZ
2.048
±2.5mV, 20ppm/°C
-40 to +85
3 Ld SOT-23
P3.064
ISL60002DIH320Z-TK*
DFA
2.048
±5.0mV, 20ppm/°C
-40 to +85
3 Ld SOT-23
P3.064
ISL60002BIH325Z-TK*
AON
2.500
±1.0mV, 20ppm/°C
-40 to +85
3 Ld SOT-23
P3.064
ISL60002DIH325Z-TK*
APB
2.500
±5.0mV, 20ppm/°C
-40 to +85
3 Ld SOT-23
P3.064
ISL60002CIH325Z-TK*
AOT
2.500
±2.5mV, 20ppm/°C
-40 to +85
3 Ld SOT-23
P3.064
ISL60002BIH326Z-TK*
DFK
2.600
±1.0mV, 20ppm/°C
-40 to +85
3 Ld SOT-23
P3.064
ISL60002CIH326Z-TK*
DFL
2.600
±2.5mV, 20ppm/°C
-40 to +85
3 Ld SOT-23
P3.064
ISL60002DIH326Z-TK*
DFM
2.600
±5.0mV, 20ppm/°C
-40 to +85
3 Ld SOT-23
P3.064
ISL60002BIH330Z-TK*
DFI
3.000
±1.0mV, 20ppm/°C
-40 to +85
3 Ld SOT-23
P3.064
ISL60002CIH330Z-TK*
DFJ
3.000
±2.5mV, 20ppm/°C
-40 to +85
3 Ld SOT-23
P3.064
ISL60002DIH330Z-TK*
DFH
3.000
±5.0mV, 20ppm/°C
-40 to +85
3 Ld SOT-23
P3.064
3
FN8082.16
May 4, 2009
ISL60002
Ordering Information (Continued)
PART
MARKING
(Bottom)
PART NUMBER
(Note)
VOUT
(V)
GRADE
TEMP. RANGE
(°C)
PACKAGE
Tape & Reel
(Pb-free)
PKG.
DWG. #
ISL60002BAH333Z-TK*
AOP
3.300
±1.0mV, 20ppm/°C
-40 to +105
3 Ld SOT-23
P3.064
ISL60002CAH333Z-TK*
AOU
3.300
±2.5mV, 20ppm/°C
-40 to +105
3 Ld SOT-23
P3.064
ISL60002DAH333Z-TK*
APC
3.300
±5.0mV, 20ppm/°C
-40 to +105
3 Ld SOT-23
P3.064
*Please refer to TB347 for details on reel specifications.
NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100%
matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations).
Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J
STD-020.
4
FN8082.16
May 4, 2009
ISL60002
Absolute Maximum Ratings
Thermal Information
Max Voltage VIN to GND . . . . . . . . . . . . . . . . . . . . . . -0.5V to +6.5V
Max Voltage VOUT to GND (10s): . . . . . . . . . . -0.5V to +VOUT + 1V
Voltage on “DNC” pins . . . . . No connections permitted to these pins
ESD Ratings
Human Body Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5500V
Machine Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .550V
Charged Device Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2kV
Thermal Resistance (Typical, Note 1)
θJA (°C/W)
3 Ld SOT-23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
202.70
Continuous Power Dissipation (TA = +85°C) . . . . . . . . . . . . . .99mW
Maximum Junction Temperature (Plastic Package) . . . . . . . +107°C
Storage Temperature Range . . . . . . . . . . . . . . . . . .-65°C to +150°C
Pb-free Reflow Profile (Note 2) . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Recommended Operating Conditions
Temperature Range
Industrial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-40°C to +85°C
3.3V Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-40°C to +105°C
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTES:
1. θJA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
2. Post-reflow drift for the ISL60002 devices will range from 100μV to 1.0mV based on experimental results with devices on FR4 double sided
boards. The design engineer must take this into account when considering the reference voltage after assembly.
Electrical Specifications ISL60002-10, VOUT = 1.024V (Additional specifications on page 8, “Common Electrical Specifications”)
Operating Conditions: VIN = 3.0V, IOUT = 0mA, COUT = 0.001µF,
TA = -40 to +85°C, unless otherwise specified.
SYMBOL
VOUT
VOA
VIN
PARAMETER
CONDITIONS
MIN
Output Voltage
VOUT Accuracy (Note 3)
TYP
MAX
UNITS
1.024
V
TA = +25°C
ISL60002B10
-1.0
+1.0
mV
ISL60002C10
-2.5
+2.5
mV
ISL60002D10
-5.0
+5.0
mV
2.7
5.5
V
Input Voltage Range
Electrical Specifications ISL60002-11, VOUT = 1.200V (Additional specifications on page 8, “Common Electrical Specifications”)
Operating Conditions: VIN = 3.0V, IOUT = 0mA, COUT = 0.001µF, TA = -40 to
+85°C, unless otherwise specified.
SYMBOL
VOUT
VOA
VIN
PARAMETER
CONDITIONS
MIN
Output Voltage
VOUT Accuracy (Note 3)
TYP
MAX
UNITS
1.200
V
TA = +25°C
ISL60002B11
-1.0
+1.0
mV
ISL60002C11
-2.5
+2.5
mV
ISL60002D11
-5.0
+5.0
mV
2.7
5.5
V
Input Voltage Range
Electrical Specifications ISL60002-12, VOUT = 1.250V (Additional specifications on page 8, “Common Electrical Specifications”)
Operating Conditions: VIN = 3.0V, IOUT = 0mA, COUT = 0.001µF,
TA = -40 to +85°C, unless otherwise specified.
SYMBOL
VOUT
VOA
VIN
PARAMETER
CONDITIONS
MIN
Output Voltage
VOUT Accuracy (Note 3)
Input Voltage Range
5
TYP
MAX
1.250
UNITS
V
TA = +25°C
ISL60002B12
-1.0
+1.0
mV
ISL60002C12
-2.5
+2.5
mV
ISL60002D12
-5.0
+5.0
mV
2.7
5.5
V
FN8082.16
May 4, 2009
ISL60002
Electrical Specifications ISL60002-18, VOUT = 1.800V (Additional specifications on page 8, “Common Electrical Specifications”)
Operating Conditions: VIN = 3.0V, IOUT = 0mA, COUT = 0.001µF, TA = -40 to
+85°C, unless otherwise specified.
SYMBOL
VOUT
VOA
VIN
PARAMETER
CONDITIONS
MIN
Output Voltage
VOUT Accuracy (Note 3)
TYP
MAX
1.800
UNITS
V
TA = +25°C
ISL60002B18
-1.0
+1.0
mV
ISL60002C18
-2.5
+2.5
mV
ISL60002D18
-5.0
+5.0
mV
2.7
5.5
V
Input Voltage Range
Electrical Specifications ISL60002-20, VOUT = 2.048V (Additional specifications on page 8, “Common Electrical Specifications”)
Operating Conditions: VIN = 3.0V, IOUT = 0mA, COUT = 0.001µF, TA = -40 to
+85°C, unless otherwise specified.
SYMBOL
VOUT
VOA
VIN
PARAMETER
CONDITIONS
MIN
Output Voltage
VOUT Accuracy (Note 3)
TYP
MAX
2.048
UNITS
V
TA = +25°C
ISL60002B20
-1.0
+1.0
mV
ISL60002C20
-2.5
+2.5
mV
ISL60002D20
-5.0
+5.0
mV
2.7
5.5
V
Input Voltage Range
Electrical Specifications ISL60002-25, VOUT = 2.500V (Additional specifications on page 8, “Common Electrical Specifications”)
Operating Conditions: VIN = 3.0V, IOUT = 0mA, COUT = 0.001µF, TA = -40 to
+85°C, unless otherwise specified.
SYMBOL
VOUT
VOA
VIN
PARAMETER
CONDITIONS
MIN
Output Voltage
VOUT Accuracy (Note 3)
TYP
MAX
2.500
UNITS
V
TA = +25°C
ISL60002B25
-1.0
+1.0
mV
ISL60002C25
-2.5
+2.5
mV
ISL60002D25
-5.0
+5.0
mV
2.7
5.5
V
Input Voltage Range
Electrical Specifications ISL60002-26, VOUT = 2.600V (Additional specifications on page 8, “Common Electrical Specifications”)
Operating Conditions: VIN = 3.0V, IOUT = 0mA, COUT = 0.001µF, TA = -40 to
+85°C, unless otherwise specified.
SYMBOL
VOUT
VOA
VIN
TC VOUT
PARAMETER
CONDITIONS
MIN
Output Voltage
VOUT Accuracy (Note 3)
TYP
MAX
2.600
UNITS
V
TA = +25°C
ISL60002B26
-1.0
+1.0
mV
ISL60002C26
-2.5
+2.5
mV
ISL60002D26
-5.0
+5.0
mV
2.8
5.5
V
20
ppm/°C
350
900
nA
Input Voltage Range
Output Voltage Temperature
Coefficient (Note 3)
IIN
Supply Current
ΔVOUT/ΔVIN
Line Regulation
+2.8V ≤ VIN ≤ +5.5V
80
350
µV/V
ΔVOUT/ΔIOUT
Load Regulation
0mA ≤ ISOURCE ≤ 7mA
25
100
µV/mA
-7mA ≤ ISINK ≤ 0mA
50
250
µV/mA
ΔVOUT/ΔTA
Thermal Hysteresis (Note 4)
ΔTA = +125°C
100
ppm
ΔVOUT/Δt
Long Term Stability (Note 5)
TA = +25°C; First 1khrs
50
ppm
6
FN8082.16
May 4, 2009
ISL60002
Electrical Specifications ISL60002-26, VOUT = 2.600V (Additional specifications on page 8, “Common Electrical Specifications”)
Operating Conditions: VIN = 3.0V, IOUT = 0mA, COUT = 0.001µF, TA = -40 to
+85°C, unless otherwise specified. (Continued)
SYMBOL
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
ISC
Short Circuit Current (to GND)*
TA = +25°C
50
mA
VN
Output Voltage Noise
0.1Hz ≤ f ≤ 10Hz
30
µVP-P
Electrical Specifications ISL60002-30, VOUT = 3.000V Operating Conditions: VIN = 5.0V, IOUT = 0mA, COUT = 0.001µF,
TA = -40 to +85°C, unless otherwise specified.
SYMBOL
VOUT
VOA
VIN
TC VOUT
PARAMETER
CONDITIONS
MIN
Output Voltage
VOUT Accuracy (Note 3)
TYP
MAX
UNITS
3.000
V
TA = +25°C
ISL60002B30
-1.0
+1.0
mV
ISL60002C30
-2.5
+2.5
mV
ISL60002D30
-5.0
+5.0
mV
3.2
5.5
V
20
ppm/°C
900
nA
Input Voltage Range
Output Voltage Temperature
Coefficient (Note 3)
IIN
Supply Current
ΔVOUT/ΔVIN
Line Regulation
+3.2V ≤ VIN ≤ +5.5V
80
250
µV/V
ΔVOUT/ΔIOUT
Load Regulation
0mA ≤ ISOURCE ≤ 7mA
25
100
µV/mA
-7mA ≤ ISINK ≤ 0mA
50
150
µV/mA
Thermal Hysteresis (Note 4)
ΔTA = +125°C
100
ppm
ΔVOUT/ΔTA
ΔVOUT/Δt
350
Long Term Stability (Note 5)
TA = +25°C; First 1khrs
50
ppm
ISC
Short Circuit Current (to GND)
TA = +25°C
50
mA
VN
Output Voltage Noise
0.1Hz ≤ f ≤ 10Hz
30
µVP-P
Electrical Specifications ISL60002-33, VOUT = 3.300V Operating Conditions: VIN = 5.0V, IOUT = 0mA, COUT = 0.001µF,
TA = -40 to +105°C, unless otherwise specified.
SYMBOL
VOUT
VOA
TC VOUT
PARAMETER
VOUT Accuracy (Note 3)
TYP
Input Voltage Range
Supply Current
ΔVOUT/ΔVIN
Line Regulation
ΔVOUT/ΔIOUT
Load Regulation
Thermal Hysteresis (Note 4)
MAX
3.300
UNITS
V
TA = +25°C
ISL60002B33
-1.0
1.0
mV
ISL60002C33
-2.5
2.5
mV
ISL60002D33
-5.0
5.0
mV
20
ppm/°C
Output Voltage Temperature
Coefficient (Note 3)
IIN
ΔVOUT/Δt
MIN
Output Voltage
VIN
ΔVOUT/ΔTA
CONDITIONS
3.5
5.5
V
350
700
nA
+3.5V ≤ VIN ≤ +5.5V
80
200
µV/V
0mA ≤ ISOURCE ≤ 20mA
25
100
µV/mA
-20mA ≤ ISINK ≤ 0mA
50
150
µV/mA
ΔTA = +145°C
100
ppm
Long Term Stability (Note 5)
TA = +25°C; First 1khrs
50
ppm
ISC
Short Circuit Current (to GND)
TA = +25°C
50
mA
VN
Output Voltage Noise
0.1Hz ≤ f ≤ 10Hz
30
µVP-P
7
FN8082.16
May 4, 2009
ISL60002
Common Electrical Specifications ISL60002 -10, -11, -12, -18, -20, and-25 Operating Conditions: VIN = 3.0V, IOUT = 0mA,
COUT = 0.001µF, TA = -40 to +85°C, unless
otherwise specified.
SYMBOL
TC VOUT
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
20
ppm/°C
350
900
nA
Output Voltage Temperature
Coefficient (Note 3)
IIN
Supply Current
ΔVOUT/ΔVIN
Line Regulation
+2.7V ≤ VIN ≤ +5.5V
80
250
µV/V
ΔVOUT/ΔIOUT
Load Regulation
0mA ≤ ISOURCE ≤ 7mA
25
100
µV/mA
-7mA ≤ ISINK ≤ 0mA
50
150
µV/mA
Thermal Hysteresis (Note 4)
ΔTA = +125°C
100
ppm
ΔVOUT/ΔTA
ΔVOUT/Δt
Long Term Stability (Note 5)
TA = +25°C; First 1khrs
50
ppm
ISC
Short Circuit Current (to GND)
(Note 6)
TA = +25°C
50
mA
VN
Output Voltage Noise
0.1Hz ≤ f ≤ 10Hz
30
µVP-P
NOTES:
3. Over the specified temperature range. Temperature coefficient is measured by the box method whereby the change in VOUT is divided by the
temperature range: (-40°C to +85°C = +125°C, or -40°C to +105°C = +145°C for the ISL60002-33).
4. Thermal Hysteresis is the change in VOUT measured @ TA = +25°C after temperature cycling over a specified range, ΔTA, VOUT is read initially
at TA = +25°C for the device under test. The device is temperature cycled and a second VOUT measurement is taken at +25°C. The difference
between the initial VOUT reading and the second VOUT reading is then expressed in ppm. For ΔTA = +125°C, the device under is cycled from
+25°C to +85°C to -40°C to +25°C, and for ΔTA = +145°C, the device under is cycled from +25°C to +105°C to -40°C to +25°C
5. Long term drift is logarithmic in nature and diminishes over time. Drift after the first 1000 hours will be approximately 10ppm.
6. Short Circuit Current (to VCC) for ISL60002-25 at VIN = 5.0V and +25°C is typically around 30mA. Shorting VOUT to VCC is not recommended
due to risk of resetting the part.
8
FN8082.16
May 4, 2009
ISL60002
Typical Performance Characteristic Curves ISL60002, VOUT = 1.024V
VIN = 3.0V, IOUT = 0mA, TA = +25°C unless otherwise specified.
700
500
600
450
+25°C
400
500
UNIT 3
+85°C
IIN (nA)
IIN (nA)
350
400
UNIT 2
300
UNIT 1
300
-40°C
250
200
200
100
150
100
2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5 4.7 4.9 5.1 5.3 5.5
0
2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5 4.7 4.9 5.1 5.3 5.5
VIN (V)
VIN (V)
FIGURE 2. IIN vs VIN OVER-TEMPERATURE
150
1.0244
125
1.0242
ΔVO (µV)
(NORMALIZED TO VIN = 3.0V)
1.0243
UNIT 3
1.0241
1.0240
UNIT 2
1.0239
UNIT 1
1.0238
1.0237
100
75
-40°C
50
25
0
-25
+85°C
-50
+25°C
-75
-100
-125
1.0236
2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5 4.7 4.9 5.1 5.3 5.5
VIN (V)
-150
2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5 4.7 4.9 5.1 5.3 5.5
VIN (V)
FIGURE 3. LINE REGULATION, 3 UNITS
FIGURE 4. LINE REGULATION OVER-TEMPERATURE
1.0250
1.0248
UNIT 2
1.0246
1.0244
VOUT (V)
VOUT (V)
(NORMALIZED TO 1.024V AT VIN = 3V)
FIGURE 1. IIN vs VIN, 3 UNITS
UNIT 3
1.0242
1.0240
UNIT 1
1.0238
1.0236
1.0234
1.0232
1.0230
-40
-15
10
35
60
85
TEMPERATURE (°C)
FIGURE 5. VOUT vs TEMPERATURE NORMALIZED to +25°C
9
FN8082.16
May 4, 2009
ISL60002
Typical Performance Characteristic Curves ISL60002, VOUT = 1.024V
(Continued)
VIN = 3.0V, IOUT = 0mA, TA = +25°C unless otherwise specified.
CL = 0pF
CL = 500pF
ΔV = 0.3V
50mV/DIV
50mV/DIV
ΔV = 0.3V
ΔV = -0.3V
ΔV = -0.3V
1ms/DIV
1ms/DIV
FIGURE 7. LINE TRANSIENT RESPONSE
FIGURE 6. LINE TRANSIENT RESPONSE, WITH CAPACITIVE
LOAD
0.6
0.5
+85°C
0.4
ΔVOUT (mV)
0.3
0.2
+25°C
0.1
0
-40°C
-0.1
-0.2
-0.3
-0.4
-0.5
-0.6
-7 -6 -5
SINKING
-4
-3
-2 -1 0 1 2
OUTPUT CURRENT
3
4
5 6 7
SOURCING
FIGURE 8. LOAD REGULATION OVER-TEMPERATURE
ΔIL = 7mA
500mV/DIV
500mV/DIV
ΔIL = 50µA
ΔIL = -50µA
ΔIL = -7mA
2ms/DIV
FIGURE 9. LOAD TRANSIENT RESPONSE
10
1ms/DIV
FIGURE 10. LOAD TRANSIENT RESPONSE
FN8082.16
May 4, 2009
ISL60002
Typical Performance Characteristic Curves ISL60002, VOUT = 1.024V
(Continued)
VIN = 3.0V, IOUT = 0mA, TA = +25°C unless otherwise specified.
3.2
3.2
2.8
2.4
VIN AND VOUT (V)
2.0
1.6
UNIT 3
1.2
0.8
UNIT 2
0.4
2.0
1.6
0
2
0.8
0.4
0
4
VREF
1.2
UNIT 1
6
TIME (ms)
8
10
12
0
2
4
6
TIME (ms)
8
10
12
FIGURE 12. TURN-ON TIME (+25°C)
FIGURE 11. TURN-ON TIME (+25°C)
160
NO LOAD
140
120
ZOUT (Ω)
VIN AND VOUT (V)
2.4
0
VIN
2.8
VIN
1nF LOAD
100
80
10nF LOAD
60
40
100nF LOAD
20
0
1
10
100
1k
FREQUENCY (Hz)
10k
100k
FIGURE 13. ZOUT vs FREQUENCY
11
FN8082.16
May 4, 2009
ISL60002
Typical Performance Characteristic Curves ISL60002, VOUT = 1.20V
VIN = 3.0V, IOUT = 0mA, TA = +25°C unless otherwise specified
500
700
450
600
UNIT 3
UNIT 2
400
IIN (nA)
IIN (nA)
500
UNIT 1
300
400
+85°C
350
+25°C
300
-40°C
250
200
200
100
150
100
2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5 4.7 4.9 5.1 5.3 5.5
0
2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5 4.7 4.9 5.1 5.3 5.5
VIN (V)
VIN (V)
FIGURE 15. IIN vs VIN OVER-TEMPERATURE
FIGURE 14. IIN vs VIN, 3 UNITS
1.2006
UNIT 2
1.2004
VOUT (V)
1.2002
1.2000
UNIT 3
UNIT 1
1.1998
1.1996
1.1994
-40
-15
10
35
60
85
TEMPERATURE (°C)
1.20010
150
1.20008
125
1.20006
1.20004
UNIT 3
1.20002
1.20000
UNIT 2
1.19998
1.19996
1.19994
UNIT 1
1.19992
ΔVO (µV)
(NORMALIZED TO VIN = 3.0V)
VOUT (V)
(NORMAILIZED TO 1.25V AT VIN = 3V)
FIGURE 16. VOUT vs TEMPERATURE NORMALIZED TO +25°C
100
+85°C
75
50
+25°C
25
0
-25
-40°C
-50
-75
-100
-125
1.19990
2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5 4.7 4.9 5.1 5.3 5.5
VIN (V)
FIGURE 17. LINE REGULATION, 3 UNITS
12
-150
2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5 4.7 4.9 5.1 5.3 5.5
VIN
FIGURE 18. LINE REGULATION OVER-TEMPERATURE
FN8082.16
May 4, 2009
ISL60002
Typical Performance Characteristic Curves ISL60002, VOUT = 1.20V (Continued)
VIN = 3.0V, IOUT = 0mA, TA = +25°C unless otherwise specified
100mV/DIV
CL = 500pF
100mV/DIV
CL = 0nF
ΔVIN = 0.30V
ΔVIN = -0.30V
1ms/DIV
1ms/DIV
FIGURE 19. LINE TRANSIENT RESPONSE
FIGURE 20. LINE TRANSIENT RESPONSE WITH CAPACITIVE
LOAD
0
0.6
-10
0.5
-20
NO LOAD
0.3
-50
10nF LOAD
-60
100nF LOAD
-70
ΔVOUT (mV)
1nF LOAD
-40
+25°C
0.2
0.1
-40°C
0.0
-0.1
-0.2
-80
-0.3
-90
-0.4
-0.5
1
10
100
1k
10k
100k
1M
-0.6
-7
FREQUENCY (Hz)
-6 -5 -4
SINKING
-3 -2 -1 0 1 2 3
OUTPUT CURRENT (mA)
4 5 6 7
SOURCING
FIGURE 22. LOAD REGULATION OVER-TEMPERATURE
200mV/DIV
FIGURE 21. PSRR vs CAPACITIVE LOAD
50mV/DIV
PSRR (dB)
+85°C
0.4
-30
-100
ΔVIN = 0.30V
ΔVIN = -0.30V
IL = -50µA
IL = 50µA
IL = -7mA
200µs/DIV
FIGURE 23. LOAD TRANSIENT RESPONSE
13
IL = 7mA
500µs/DIV
FIGURE 24. LOAD TRANSIENT RESPONSE
FN8082.16
May 4, 2009
ISL60002
Typical Performance Characteristic Curves ISL60002, VOUT = 1.20V (Continued)
VIN = 3.0V, IOUT = 0mA, TA = +25°C unless otherwise specified
160
3.2
120
0
100
ZOUT (Ω)
2.4
1.6
1.2
VREF
0.8
10nF LOAD
80
60
40
100nF LOAD
20
0.4
0
1nF LOAD
NO LOAD
140
VIN
0
2
4
6
TIME (ms)
8
10
0
12
1
FIGURE 25. TURN-ON TIME (+25°C)
10
100
1k
FREQUENCY (Hz)
10k
100k
FIGURE 26. ZOUT vs FREQUENCY
10µV/DIV
VIN AND VOUT (V)
2.8
10s/DIV
FIGURE 27. VOUT NOISE
14
FN8082.16
May 4, 2009
ISL60002
Typical Performance Characteristic Curves ISL60002, VOUT = 1.25V
VIN = 3.0V, IOUT = 0mA, TA = +25°C unless otherwise specified
460
700
650
440
UNIT 3
600
+85°C
420
400
500
IIN (nA)
IIN (nA)
550
450
UNIT 2
400
+25°C
380
-40°C
360
350
340
UNIT 1
300
320
250
200
2.5
3.0
3.5
4.0
4.5
5.0
300
2.5
5.5
3.0
3.5
4.0
4.5
5.0
5.5
VIN (V)
VIN (V)
FIGURE 29. IIN vs VIN OVER-TEMPERATURE
FIGURE 28. IIN vs VIN, 3 UNITS
1.2510
1.2508
UNIT 2
1.2506
VOUT (V)
1.2504
UNIT 3
1.2502 UNIT 1
1.2500
1.2498
1.2496
1.2494
1.2492
1.249
-40
-15
10
35
60
85
TEMPERATURE (°C)
FIGURE 30. VOUT vs TEMPERATURE NORMALIZED TO +25°C
50
1.25025
ΔVO (µV)
(NORMALIZED TO VIN = 3.0V)
VOUT (V)
NORMAILIZED TO 1.25V AT VIN = 3V
1.25030
UNIT 1
1.25020
1.25015
UNIT
3 (570nA)
UNIT
3
1.25010
UNIT 2
1.25005
1.25000
1.24995
1.24990
2.5
3.0
3.5
4.0
4.5
VIN (V)
FIGURE 31. LINE REGULATION, 3 UNITS
15
5.0
5.5
25
-40°C
+25°C
+85°C
0
-25
2.5
3.0
3.5
4.0
4.5
5.0
5.5
VIN (V)
FIGURE 32. LINE REGULATION OVER-TEMPERATURE
FN8082.16
May 4, 2009
ISL60002
Typical Performance Characteristic Curves ISL60002, VOUT = 1.25V
(Continued)
VIN = 3.0V, IOUT = 0mA, TA = +25°C unless otherwise specified
CL = 0nF
100mV/DIV
100mV/DIV
CL = 1nF
ΔVIN = 0.30V
ΔVIN = -0.30V
ΔVIN = 0.30V
ΔVIN = -0.30V
1ms/DIV
1ms/DIV
FIGURE 34. LINE TRANSIENT RESPONSE, WITH CAPACITIVE
LOAD
FIGURE 33. LINE TRANSIENT RESPONSE
0
0.3
-10
NO LOAD
0.2 +85°C
ΔVOUT (mV)
-30
1nF LOAD
-40
-50
+25°C
0.1
-40°C
10nF LOAD
0.0
-60
100nF LOAD
-70
-80
1
10
100
1k
10k
100k
1M
-0.1
-7
FREQUENCY (Hz)
-6 -5 -4
SINKING
-3
-2
-1
0
1
2
3
OUTPUT CURRENT (mA)
4 5 6 7
SOURCING
FIGURE 36. LOAD REGULATION
200mV/DIV
FIGURE 35. PSRR vs CAPACITIVE LOAD
50mV/DIV
PSRR (dB)
-20
IL = 50µA
IL = -50µA
IL = -7mA
100µs/DIV
FIGURE 37. LOAD TRANSIENT RESPONSE
16
IL = 7mA
500µs/DIV
FIGURE 38. LOAD TRANSIENT RESPONSE
FN8082.16
May 4, 2009
ISL60002
Typical Performance Characteristic Curves ISL60002, VOUT = 1.25V
(Continued)
VIN = 3.0V, IOUT = 0mA, TA = +25°C unless otherwise specified
180
3.0
NO LOAD
VIN
160
2.5
10nF LOAD
120
ZOUT (Ω)
2.0
1.5
1nF LOAD
100
80
60
1.0
VREF
100nF LOAD
40
0.5
20
0
-1
1
3
5
TIME (ms)
7
9
0
11
1
FIGURE 39. TURN-ON TIME (+25°C)
10
100
1k
FREQUENCY (Hz)
10k
1M
FIGURE 40. ZOUT vs FREQUENCY
10µV/DIV
VIN AND VOUT (V)
140
10s/DIV
FIGURE 41. VOUT NOISE
17
FN8082.16
May 4, 2009
ISL60002
Typical Performance Curves ISL60002, VOUT = 1.8V
VIN = 3.0V, IOUT = 0mA, TA = +25°C unless otherwise specified
700
500
600
450
400
500
400
UNIT 2
300
UNIT 1
+25°C
+85°C
350
IIN (nA)
IIN (nA)
UNIT 3
300
-40°C
250
200
200
100
150
0
2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5 4.7 4.9 5.1 5.3 5.5
100
2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5 4.7 4.9 5.1 5.3 5.5
VIN (V)
VIN (V)
FIGURE 42. IIN vs VIN, 3 UNITS
FIGURE 43. IIN vs VIN OVER-TEMPERATURE
150
125
1.80015
1.80010
1.80005
UNIT 3
1.80000
UNIT 1
1.79995
UNIT 2
1.79990
1.79985
ΔVO (µV)
(NORMALIZED TO VIN = 3.0V)
VOUT (µV)
(NORMALIZED TO 1.80V AT VIN = 3V)
1.80020
100
75
-40°C
50
25
0
-25
+85°C
-50
+25°C
-75
-100
-125
1.7998
2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5 4.7 4.9 5.1 5.3 5.5
-150
2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5 4.7 4.9 5.1 5.3 5.5
VIN (V)
FIGURE 44. LINE REGULATION (3 REPRESENTATIVE UNITS)
VIN (V)
FIGURE 45. LINE REGULATION OVER-TEMPERATURE
CL = 500pF
CL = 500pF
ΔV = 0.3V
50mV/DIV
50mV/DIV
ΔV = 0.3V
ΔV = -0.3V
ΔV = -0.3V
1ms/DIV
1ms/DIV
FIGURE 46. LINE TRANSIENT RESPONSE, WITH CAPACITIVE
LOAD
FIGURE 47. LINE TRANSIENT RESPONSE
18
FN8082.16
May 4, 2009
ISL60002
Typical Performance Curves ISL60002, VOUT = 1.8V
(Continued)
VIN = 3.0V, IOUT = 0mA, TA = +25°C unless otherwise specified
0.8
0
+85°C
0.6
-10
NO LOAD
-20
+25°C
0.4
ΔVOUT (mV)
PSRR (dB)
-30
-40
1nF LOAD
-50
-60
0.2
-40°C
0.0
-0.2
10nF LOAD
-70
-0.4
-80
100nF LOAD
-0.6
-90
-0.8
-100
1
10
100
1k
10k
100k
-10
-8
-6
SINKING
1G
FREQUENCY (Hz)
-4
-2
0
2
4
OUTPUT CURRENT
6
8
10
SOURCING
FIGURE 49. LOAD REGULATION OVER-TEMPERATURE
FIGURE 48. PSRR vs CAPACITIVE LOAD
ΔIL = 10mA
500mV/DIV
500mV/DIV
ΔIL = 50µA
ΔIL = -50µA
ΔIL = -10mA
2ms/DIV
1ms/DIV
FIGURE 50. LOAD TRANSIENT RESPONSE
FIGURE 51. LOAD TRANSIENT RESPONSE
3.2
3.2
VIN AND VOUT (V)
VIN AND VOUT (V)
2.4
2.0
UNIT 3
1.6
UNIT 2
1.2
UNIT 1
2.4
2.0
1.6
0.8
0.4
0.4
0
2
4
6
TIME (ms)
8
FIGURE 52. TURN-ON TIME (+25°C)
19
10
12
VREF
1.2
0.8
0
VIN
2.8
VIN
2.8
0
0
2
4
6
TIME (ms)
8
10
12
FIGURE 53. TURN-ON TIME (+25°C)
FN8082.16
May 4, 2009
ISL60002
Typical Performance Curves ISL60002, VOUT = 1.8V
(Continued)
VIN = 3.0V, IOUT = 0mA, TA = +25°C unless otherwise specified
160
1nF LOAD
140
NO LOAD
100
5mV/DIV
ZOUT (Ω)
120
100nF LOAD
80
60
10nF LOAD
40
20
0
1
10
100
1k
10k
FREQUENCY (Hz)
FIGURE 54. ZOUT vs FREQUENCY
20
100k
1ms/DIV
FIGURE 55. VOUT NOISE
FN8082.16
May 4, 2009
ISL60002
Typical Performance Curves ISL60002, VOUT = 2.048V
VIN = 3.0V, IOUT = 0mA, TA = +25°C unless otherwise specified
700
500
600
450
400
500
+25°C
+85°C
UNIT 3
IIN (nA)
IIN (nA)
350
400
UNIT 2
300
UNIT 1
300
-40°C
250
200
200
100
150
100
2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5 4.7 4.9 5.1 5.3 5.5
0
2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5 4.7 4.9 5.1 5.3 5.5
VIN (V)
VIN (V)
FIGURE 57. IIN vs VIN OVER-TEMPERATURE
2.0484
2.0483
2.0482
UNIT 1
ΔVO (µV)
NORMALIZED TO VIN = 3.0V)
VOUT (V)
(NORMALIZED TO 2.048V AT VIN = 3V)
FIGURE 56. IIN vs VIN (3 REPRESENTATIVE UNITS)
UNIT 2
2.0481
2.0480
UNIT 3
2.0479
2.0478
2.0477
2.0476
2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5 4.7 4.9 5.1 5.3 5.5
200
175
-40°C
150
125
100
+25°C
75
50
+85°C
25
0
-25
-50
-75
-100
-125
-150
2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5 4.7 4.9 5.1 5.3 5.5
VIN (V)
VIN (V)
FIGURE 58. LINE REGULATION (3 REPRESENTATIVE UNITS)
FIGURE 59. LINE REGULATION OVER-TEMPERATURE
2.0484
2.0483
2.0482
VOUT (V)
2.0481
UNIT 2
2.0480
2.0479
UNIT 1
2.0478
2.0477
UNIT 3
2.0476
2.0475
2.0474
-40
-15
10
35
60
85
TEMPERATURE (°C)
FIGURE 60. VOUT vs TEMPERATURE NORMALIZED to +25°C
21
FN8082.16
May 4, 2009
ISL60002
Typical Performance Curves ISL60002, VOUT = 2.048V
(Continued)
VIN = 3.0V, IOUT = 0mA, TA = +25°C unless otherwise specified
CL = 500pF
CL = 0pF
ΔV = 0.3V
50mV/DIV
50mV/DIV
ΔV = 0.3V
ΔV = -0.3V
ΔV = -0.3V
1ms/DIV
1ms/DIV
FIGURE 61. LINE TRANSIENT RESPONSE, WITH CAPACITIVE
LOAD
FIGURE 62. LINE TRANSIENT RESPONSE
1.4
1.2
1.0
ΔVOUT (mV)
0.8
0.6
0.4
0.2
+85°C
+25°C
-40°C
0
-0.2
-0.4
-0.6
-7 -6 -5
SINKING
-4
-3
-2 -1 0 1 2 3
OUTPUT CURRENT
4
5
6
7
SOURCING
FIGURE 63. LOAD REGULATION OVER-TEMPERATURE
ΔIL = 7mA
500mV/DIV
500mV/DIV
ΔIL = 50µA
ΔIL = -50µA
ΔIL = -7mA
2ms/DIV
FIGURE 64. LOAD TRANSIENT RESPONSE
22
2ms/DIV
FIGURE 65. LOAD TRANSIENT RESPONSE
FN8082.16
May 4, 2009
ISL60002
Typical Performance Curves ISL60002, VOUT = 2.048V
(Continued)
VIN = 3.0V, IOUT = 0mA, TA = +25°C unless otherwise specified
3.2
3.2
VIN
2.8
VIN AND VOUT (V)
2.0
UNIT 3
UNIT 2
1.6
UNIT 1
1.2
0.8
2.4
2.0
VREF
1.6
1.2
0.8
0.4
0.4
0
2
4
6
TIME (ms)
8
10
0
12
0
2
FIGURE 66. TURN-ON TIME (+25°C)
4
6
TIME (ms)
8
10
12
FIGURE 67. TURN-ON TIME (+25°C)
160
NO LOAD
140
120
ZOUT (Ω)
VIN AND VOUT (V)
2.4
0
VIN
2.8
10nF LOAD
1nF LOAD
100
80
60
40
100nF LOAD
20
0
1
10
100
1k
FREQUENCY (Hz)
10k
100k
FIGURE 68. ZOUT vs FREQUENCY
23
FN8082.16
May 4, 2009
ISL60002
Typical Performance Characteristic Curves ISL60002, VOUT = 2.50V
VIN = 3.0V, IOUT = 0mA, TA = +25°C unless otherwise specified
600
460
550
440
500
420
+85°C
UNIT 3
400
IIN (nA)
IIN (nA)
450
400
UNIT 2
350
+25°C
380
-40°C
360
300
340
UNIT 1
250
200
2.5
3.0
320
3.5
4.0
4.5
5.0
300
2.5
5.5
3.0
3.5
VIN (V)
4.0
4.5
5.0
5.5
VIN (V)
FIGURE 69. IIN vs VIN, 3 UNITS
FIGURE 70. IIN vs VIN OVER-TEMPERATURE
2.5020
2.5015
UNIT 2
UNIT 1
VOUT (V)
2.5010
2.5005
UNIT 3
2.5000
2.4995
2.4990
2.4985
-40
-15
10
35
60
85
TEMPERATURE (°C)
FIGURE 71. VOUT vs TEMPERATURE NORMALIZED TO +25°C
200
UNIT 2
2.50012
2.50008
ΔVO (µV)
UNIT 1
2.50004
UNIT 3
2.50000
2.49996
2.49992
2.5
3.0
3.5
4.0
4.5
VIN (V)
FIGURE 72. LINE REGULATION, 3 UNITS
24
5.0
5.5
(NORMALIZED TO VIN = 3.0V)
VOUT (V)
NORMAILIZED TO 2.50V AT VIN = 3V
2.50016
150
-40°C
+25°C
100
+85°C
50
0
-50
-100
2.5
3.0
3.5
4.0
4.5
5.0
5.5
VIN (V)
FIGURE 73. LINE REGULATION OVER-TEMPERATURE
FN8082.16
May 4, 2009
ISL60002
Typical Performance Characteristic Curves ISL60002, VOUT = 2.50V
(Continued)
VIN = 3.0V, IOUT = 0mA, TA = +25°C unless otherwise specified
CL = 0nF
100mV/DIV
100mV/DIV
CL = 1nF
ΔVIN = 0.30V
ΔVIN = -0.30V
ΔVIN = 0.30V
ΔVIN = -0.30V
1ms/DIV
1ms/DIV
FIGURE 74. LINE TRANSIENT RESPONSE
FIGURE 75. LINE TRANSIENT RESPONSE
0.2
0
-10
NO LOAD
ΔVOUT (mV)
+85°C
-30
1nF LOAD
-40
-50
0.1
+25°C
-40°C
0.0
10nF LOAD
-60
100nF LOAD
-70
-80
1
10
100
1k
10k
100k
-0.1
-7
1M
FREQUENCY (Hz)
-6 -5 -4
SINKING
-3
-2
-1
0
1
2
3
OUTPUT CURRENT (mA)
4 5 6 7
SOURCING
FIGURE 77. LOAD REGULATION OVER-TEMPERATURE
200mV/DIV
FIGURE 76. PSRR vs CAPACITIVE LOAD
50mV/DIV
PSRR (dB)
-20
IL = -50µA
IL = 50µA
IL = -7mA
200µs/DIV
FIGURE 78. LOAD TRANSIENT RESPONSE
25
IL = 7mA
500µs/DIV
FIGURE 79. LOAD TRANSIENT RESPONSE
FN8082.16
May 4, 2009
ISL60002
Typical Performance Characteristic Curves ISL60002, VOUT = 2.50V
(Continued)
VIN = 3.0V, IOUT = 0mA, TA = +25°C unless otherwise specified
200
3.5
1nF LOAD
NO LOAD
3.0
150
ZOUT (Ω)
2.5
2.0
1.5
1.0
10nF LOAD
100
50
100nF LOAD
0.5
0
-1
0
1
3
5
7
9
11
1
TIME (ms)
10
100
1k
10k
100k
FREQUENCY (Hz)
FIGURE 81. ZOUT vs FREQUENCY
FIGURE 80. TURN-ON TIME (+25°C)
10µV/DIV
VIN AND VOUT (V)
VREF
10s/DIV
FIGURE 82. VOUT NOISE
26
FN8082.16
May 4, 2009
ISL60002
Typical Performance Characteristic Curves ISL60002, VOUT = 3.0V
VIN = 5.0V, IOUT = 0mA, TA = +25°C unless otherwise specified
500
350
450
335
UNIT 1
320
IIN (nA)
IIN (nA)
400
UNIT 2
350
+85°C
305
+25°C
290
300
UNIT 3
250
275
200
3.2
260
3.2
-40°C
3.6
4.0
4.4
VIN (V)
4.8
5.2
5.6
3.6
4.0
4.4
VIN (V)
4.8
5.2
5.6
FIGURE 84. IIN vs VIN OVER-TEMPERATURE
FIGURE 83. IIN vs VIN, 3 UNITS
VOUT (V) NORMALIZED TO +25°C
3.0008
3.0006
3.0004
3.0002
UNIT 1
3.0000
2.9998
UNIT 2
2.9996
UNIT 3
2.9994
2.9992
2.9990
-40
-15
10
35
60
85
TEMPERATURE (°C)
3.0001
40
20
UNIT 3
3.0000
Δ VOUT (µV)
VOUT(V) NORMALIZED TO VOUT = 3.0V
AT VIN = 5.0V
FIGURE 85. VOUT vs TEMPERATURE NORMALIZED TO +25°C
UNIT 2
3.0000
UNIT 1
2.9999
3.2
3.6
4.0
4.4
VIN (V)
4.8
5.2
5.6
FIGURE 86. LINE REGULATION (3 REPRESENTATIVE UNITS)
27
+85°C
+25°C
0
-20
-40
-60
-40°C
-80
3.2
3.6
4.0
4.4
4.8
5.2
5.6
VIN (V)
FIGURE 87. LINE REGULATION OVER-TEMPERATURE
FN8082.16
May 4, 2009
ISL60002
Typical Performance Characteristic Curves ISL60002, VOUT = 3.0V (Continued)
VIN = 5.0V, IOUT = 0mA, TA = +25°C unless otherwise specified
CL = 0nF
100mV/DIV
100mV/DIV
CL = 1nF
ΔVIN = 0.30V
ΔVIN = -0.30V
ΔVIN = 0.30V
ΔVIN = -0.30V
1ms/DIV
1ms/DIV
FIGURE 89. LINE TRANSIENT RESPONSE
FIGURE 88. LINE TRANSIENT RESPONSE
0.35
0
0.25
-20
1nF LOAD
-40
-50
10nF LOAD
-60
0.15
-40°C
0.10
0.05
0.00
100nF LOAD
-70
ΔVOUT (mV)
PSRR (dB)
+25°C
0.20
-30
-0.05
-80
-0.10
-90
-100
+85°C
0.30
NO LOAD
-10
1
10
100
1k
10k
FREQUENCY (Hz)
100k
-0.15
-7 -6 -5
SINKING
-4
-3
-2
-1
0
1
2
3
OUTPUT CURRENT (mA)
4
5 6 7
SOURCING
FIGURE 91. LOAD REGULATION OVER-TEMPERATURE
1V/DIV
200mV/DIV
FIGURE 90. PSRR vs CAPACITIVE LOAD
1M
IL = -50µA
IL = 50µA
200µs/DIV
FIGURE 92. LOAD TRANSIENT RESPONSE
28
IL = -1mA
IL = 1mA
200µs/DIV
FIGURE 93. LOAD TRANSIENT RESPONSE
FN8082.16
May 4, 2009
ISL60002
Typical Performance Characteristic Curves ISL60002, VOUT = 3.0V (Continued)
1V/DIV
1V/DIV
VIN = 5.0V, IOUT = 0mA, TA = +25°C unless otherwise specified
IL = -7mA
IL = 7mA
IL = -20mA
200µs/DIV
200µs/DIV
FIGURE 94. LOAD TRANSIENT RESPONSE
FIGURE 95. LOAD TRANSIENT RESPONSE
160
5
120
ZOUT (Ω)
4
3
VREF
2
10nF LOAD
100
80
60
40
1
0
1nF LOAD
NO LOAD
140
VIN
VIN AND VOUT (V)
IL = 20mA
100nF LOAD
20
0
2
4
6
TIME (ms)
8
FIGURE 96. TURN-ON TIME (+25°C)
29
10
12
0
1
10
100
1k
FREQUENCY (Hz)
10k
100k
FIGURE 97. ZOUT vs FREQUENCY
FN8082.16
May 4, 2009
ISL60002
Typical Performance Characteristic Curves ISL60002, VOUT = 3.3V
VIN = 5.0V, IOUT = 0mA, TA = +25°C unless otherwise specified
400
600
550
380
500
+105°C
UNIT 3
400
360
IIN (nA)
IIN (nA)
450
UNIT 2
350
300
UNIT 1
250
+25°C
340
-40°C
320
300
200
280
150
100
3.5
3.7
3.9
4.1
4.3
4.5
4.7
4.9
5.1
5.3
260
3.5
5.5
3.7
3.9
4.1
4.3
VIN (V)
4.5 4.7
VIN (V)
4.9
5.1
5.3
5.5
FIGURE 99. IIN vs VIN OVER-TEMPERATURE
FIGURE 98. IIN vs VIN, 3 UNITS
3.3008
3.3006
UNIT 1
3.3004
UNIT 3
VOUT (V)
3.3002
3.3000
UNIT 2
3.2998
3.2996
3.2994
3.2992
3.2990
-40
-15
10
35
60
85
TEMPERATURE (°C)
3.30020
150
3.30015
125
ΔVO (µV)
(NORMALIZED TO VIN = 5.0V)
VOUT (V)
(NORMAILIZED TO 3.30V AT VIN = 5V)
FIGURE 100. VOUT vs TEMPERATURE NORMALIZED TO +25°C
3.30010
3.30005 UNIT 3
3.30000
UNIT 2
3.29995
3.29990
UNIT 1
3.29985
3.29980
3.29975
3.29970
3.5
100
75
50
+105°C
-40°C
25
0
-25
-50
+25°C
-75
-100
-125
3.7
3.9
4.1
4.3
4.5
4.7
4.9
5.1
VIN (V)
FIGURE 101. LINE REGULATION, 3 UNITS
30
5.3
5.5
-150
3.5
3.7
3.9
4.1
4.3
4.5 4.7
VIN (V)
4.9
5.1
5.3
5.5
FIGURE 102. LINE REGULATION OVER-TEMPERATURE
FN8082.16
May 4, 2009
ISL60002
Typical Performance Characteristic Curves ISL60002, VOUT = 3.3V (Continued)
VIN = 5.0V, IOUT = 0mA, TA = +25°C unless otherwise specified
CL = 1nF
100mV/DIV
100mV/DIV
CL = 0nF
ΔVIN = 0.30V
ΔVIN = -0.30V
ΔVIN = 0.30V
ΔVIN = -0.30V
1ms/DIV
1ms/DIV
FIGURE 103. LINE TRANSIENT RESPONSE
FIGURE 104. LINE TRANSIENT RESPONSE
0
NO LOAD
-10
-20
PSRR (dB)
-30
1nF LOAD
-40
-50
10nF LOAD
-60
100nF LOAD
-70
-80
-90
-100
1
10
100
1k
10k
FREQUENCY (Hz)
100k
1M
FIGURE 105. PSRR vs CAPACITIVE LOAD
0.60
1.00
0.50
0.80
0.40
0.40
+25°C
0.20
0.10
ΔVOUT (mV)
ΔVOUT (mV)
0.30
-40°C
0.00
+105°C
0.60
+105°C
-0.10
-0.20
0.20
+25°C
-40°C
0.00
-0.20
-0.40
-0.30
-0.60
-0.40
-0.50
-0.60
-7 -6 -5
SINKING
-0.80
-4
-3
-2
-1
0
1
2
3
OUTPUT CURRENT (mA)
FIGURE 106. LOAD REGULATION
31
4
5 6 7
SOURCING
-1.00
-20 -18-16-14-12-10 -8 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20
SINKING
SOURCING
OUTPUT CURRENT (mA)
FIGURE 107. LOAD REGULATION OVER-TEMPERATURE
FN8082.16
May 4, 2009
ISL60002
Typical Performance Characteristic Curves ISL60002, VOUT = 3.3V (Continued)
1V/DIV
200mV/DIV
VIN = 5.0V, IOUT = 0mA, TA = +25°C unless otherwise specified
IL = -50µA
IL = -1mA
IL = 50µA
200µs/DIV
200µs/DIV
FIGURE 109. LOAD TRANSIENT RESPONSE
1V/DIV
1V/DIV
FIGURE 108. LOAD TRANSIENT RESPONSE
IL = -7mA
IL = 7mA
IL = -20mA
200µs/DIV
IL = 20mA
200µs/DIV
FIGURE 110. LOAD TRANSIENT RESPONSE
FIGURE 111. LOAD TRANSIENT RESPONSE
160
5
1nF LOAD
NO LOAD
140
VIN
120
4
10nF LOAD
100
3
ZOUT (Ω)
VIN AND VOUT (V)
IL = 1mA
VREF
2
80
60
40
100nF LOAD
1
20
0
0
2
4
6
TIME (ms)
8
FIGURE 112. TURN-ON TIME (+25°C)
32
10
12
0
1
10
100
1k
FREQUENCY (Hz)
10k
100k
FIGURE 113. ZOUT vs FREQUENCY
FN8082.16
May 4, 2009
ISL60002
High Current Application
VOUT (V) NORMALIZED TO 0mA LOAD
2.502
VIN = 5V
2.500
VOUT (V)
2.498
2.496
VIN = 3.3V
2.494
2.492
2.490
VIN = 3.5V
2.488
2.486
0
5
10
15
20
25
30
2.5001
2.4998
2.4995
2.4992
5VIN, +85°C
3.2VIN, +85°C
2.4989
2.4986
2.4983
3.3VIN, +85°C
2.4980
0
4
8
FIGURE 114. DIFFERENT VIN AT ROOM TEMPERATURE
Applications Information
FGA Technology
The ISL60002 series of voltage references use the floating gate
technology to create references with very low drift and supply
current. Essentially, the charge stored on a floating gate cell is
set precisely in manufacturing. The reference voltage output
itself is a buffered version of the floating gate voltage. The
resulting reference device has excellent characteristics which
are unique in the industry: very low temperature drift, high initial
accuracy, and almost zero supply current. Also, the reference
voltage itself is not limited by voltage bandgaps or zener
settings, so a wide range of reference voltages can be
programmed (standard voltage settings are provided, but
customer-specific voltages are available).
The process used for these reference devices is a floating
gate CMOS process, and the amplifier circuitry uses CMOS
transistors for amplifier and output transistor circuitry. While
providing excellent accuracy, there are limitations in output
noise level and load regulation due to the MOS device
characteristics. These limitations are addressed with circuit
techniques discussed in other sections.
Nanopower Operation
Reference devices achieve their highest accuracy when
powered up continuously, and after initial stabilization has
taken place. This drift can be eliminated by leaving the
power on continuously.
The ISL60002 is the first high precision voltage reference
with ultra low power consumption that makes it possible to
leave power on continuously in battery operated circuits. The
ISL60002 consumes extremely low supply current due to the
proprietary FGA technology. Supply current at room
temperature is typically 350nA, which is 1 to 2 orders of
magnitude lower than competitive devices. Application
circuits using battery power will benefit greatly from having
an accurate, stable reference, which essentially presents no
load to the battery.
33
12
16
20
24
28
32
ILOAD (mA)
ILOAD (mA)
FIGURE 115. DIFFERENT VIN AT HIGH TEMPERATURE
In particular, battery powered data converter circuits that
would normally require the entire circuit to be disabled when
not in use can remain powered up between conversions as
shown in Figure 116. Data acquisition circuits providing 12 to
24 bits of accuracy can operate with the reference device
continuously biased with no power penalty, providing the
highest accuracy and lowest possible long term drift.
Other reference devices consuming higher supply currents
will need to be disabled in between conversions to conserve
battery capacity. Absolute accuracy will suffer as the device is
biased and requires time to settle to its final value, or, may not
actually settle to a final value as power on time may be short.
VIN = +3.0V
10µF
0.01µF
VIN
VOUT
ISL60002-25
VOUT = 2.5V
GND
0.001µF TO 0.01µF
REF IN
SERIAL
BUS
ENABLE
SCK
SDAT
12 TO 24-BIT
A/D CONVERTER
FIGURE 116.
Board Mounting Considerations
For applications requiring the highest accuracy, board mounting
location should be reviewed. Placing the device in areas
subject to slight twisting can cause degradation of the accuracy
of the reference voltage due to die stresses. It is normally best
to place the device near the edge of a board, or the shortest
side, as the axis of bending is most limited at that location.
Obviously mounting the device on flexprint or extremely thin PC
material will likewise cause loss of reference accuracy.
FN8082.16
May 4, 2009
ISL60002
Board Assembly Considerations
Post-assembly x-ray inspection may also lead to permanent
changes in device output voltage and should be minimized
or avoided. Most inspection equipment will not affect the
FGA reference voltage, but if x-ray inspection is required, it
is advisable to monitor the reference output voltage to verify
excessive shift has not occurred.
400
CL = 0
NOISE VOLTAGE (µVP-P)
FGA references provide high accuracy and low temperature
drift but some PC board assembly precautions are
necessary. Normal Output voltage shifts of 100µV to 1mV
can be expected with Pb-free reflow profiles. Precautions
should be taken to avoid excessive heat or extended
exposure to high reflow temperatures, which may reduce
device initial accuracy.
350
CL = 0.001µF
300
CL = 0.1µF
CL = 0.01µF AND 10µF + 2kΩ
250
200
150
100
50
0
1
34
100
1k
10k
100k
FIGURE 117. NOISE REDUCTION
Noise Performance and Reduction
The output noise voltage in a 0.1Hz to 10Hz bandwidth is
typically 30µVP-P. This is shown in the plot in the Typical
Performance Curves. The noise measurement is made with
a bandpass filter made of a 1 pole high-pass filter with a
corner frequency at 0.1Hz and a 2-pole low-pass filter with a
corner frequency at 12.6Hz to create a filter with a 9.9Hz
bandwidth. Noise in the 10kHz to 1MHz bandwidth is
approximately 400µVP-P with no capacitance on the output,
as shown in Figure 117. These noise measurements are
made with a 2 decade bandpass filter made of a 1 pole
high-pass filter with a corner frequency at 1/10 of the center
frequency and 1-pole low-pass filter with a corner frequency
at 10 times the center frequency. Figure 117 also shows the
noise in the 10kHz to 1MHz band can be reduced to about
50µVP-P using a 0.001µF capacitor on the output. Noise in
the 1kHz to 100kHz band can be further reduced using a
0.1µF capacitor on the output, but noise in the 1Hz to 100Hz
band increases due to instability of the very low power
amplifier with a 0.1µF capacitance load. For load
capacitances above 0.001µF the noise reduction network
shown in Figure 118 is recommended. This network reduces
noise significantly over the full bandwidth. As shown in
Figure 117, noise is reduced to less than 40µVP-P from 1Hz
to 1MHz using this network with a 0.01µF capacitor and a
2kΩ resistor in series with a 10µF capacitor.
10
VIN = 3.0V
10µF
0.1µF
VIN
VO
ISL60002-25
VOUT = 2.50V
GND
2kΩ
0.01µF
10µF
FIGURE 118. NOISE REDUCTION NETWORK
Turn-On Time
The ISL60002 devices have ultra-low supply current and
thus the time to bias up internal circuitry to final values will
be longer than with higher power references. Normal turn-on
time is typically 7ms. This is shown in Figure 119. Since
devices can vary in supply current down to >300nA, turn-on
time can last up to about 12ms. Care should be taken in
system design to include this delay before measurements or
conversions are started.
FN8082.16
May 4, 2009
ISL60002
Temperature Coefficient
3.5
The limits stated for temperature coefficient (tempco) are
governed by the method of measurement. The
overwhelming standard for specifying the temperature drift of
a reference is to measure the reference voltage at two
temperatures, take the total variation, (VHIGH – VLOW), and
divide by the temperature extremes of measurement
(THIGH – TLOW). The result is divided by the nominal
reference voltage (at T = +25°C) and multiplied by 106 to
yield ppm/°C. This is the “Box” method for specifying
temperature coefficient.
3.0
VIN
VIN AND VOUT (V)
2.5
2.0
UNIT 3
1.5
1.0
UNIT 1
UNIT 2
0.5
0
-1
1
3
5
TIME (ms)
7
9
11
7
9
11
3.5
VIN
3.0
VIN AND VOUT (V)
2.5
2.0
UNIT 3
UNIT 1
1.5
1.0
UNIT 2
0.5
0
-1
1
3
5
TIME (ms)
FIGURE 119. TURN-ON TIME
Typical Application Circuits
VIN = 3.0V
R = 200Ω
2N2905
VIN
ISL60002 VOUT
VOUT = 2.50V
2.5V/50mA
0.001µF
GND
FIGURE 120. PRECISION 2.5V 50mA REFERENCE
35
FN8082.16
May 4, 2009
ISL60002
Typical Application Circuits (Continued)
2.7V TO 5.5V
0.1µF
10µF
VIN
VOUT
ISL60002-25
VOUT = 2.50V
GND
0.001µF
VCC
RH
VOUT
X9119
+
SDA
2-WIRE BUS
VOUT
SCL
VSS
–
(BUFFERED)
RL
FIGURE 121. 2.5V FULL SCALE LOW-DRIFT 10-BIT ADJUSTABLE VOLTAGE SOURCE
2.7V TO 5.5V
0.1µF
10µF
VIN
VOUT
ISL60002-25
VOUT = 2.50V
GND
+
VOUT SENSE
–
LOAD
FIGURE 122. KELVIN SENSED LOAD
36
FN8082.16
May 4, 2009
ISL60002
Small Outline Transistor Plastic Packages (SOT23-3)
0.20 (0.008) M
P3.064
VIEW C
C
3 LEAD SMALL OUTLINE TRANSISTOR PLASTIC PACKAGE
CL
b
INCHES
SYMBOL
6
5
4
CL
CL
E1
E
1
2
3
e
e1
D
C
CL
A
A2
A1
WITH
b
b1
MILLIMETERS
MAX
MIN
MAX
NOTES
A
0.035
0.044
0.89
1.12
-
A1
0.001
0.004
0.013
0.10
-
A2
0.035
0.037
0.88
0.94
-
b
0.015
0.020
0.37
0.50
-
b1
0.012
0.018
0.30
0.45
-
c
0.003
0.007
0.085
0.18
6
c1
0.003
0.005
0.08
0.13
6
D
0.110
0.120
2.80
3.04
3
E
0.083
0.104
2.10
2.64
-
E1
0.047
0.055
1.20
1.40
3
SEATING
PLANE
e
0.0374 Ref
0.95 Ref
-
-C-
e1
0.0748 Ref
1.90 Ref
-
L
-
0.10 (0.004) C
PLATING
MIN
c
c1
0.016
0.21
0.41
4
L1
0.024 Ref
0.60 Ref
-
L2
0.010 Ref
0.25 Ref
-
N
3
3
5
R
0.004
-
0.10
-
-
R1
0.004
0.010
0.10
0.25
-
a
0°
8°
0°
8°
Rev. 1 11/06
BASE METAL
NOTES:
1. Dimensioning and tolerance per ASME Y14.5M-1994.
4X θ1
2. Package conforms to EIAJ SC-74 and JEDEC MO178AB.
3. Dimensions D and E1 are exclusive of mold flash, protrusions,
or gate burrs.
R1
4. Footlength L measured at reference to gauge plane.
R
5. “N” is the number of terminal positions.
GAUGE PLANE
SEATING
PLANE
L
C
L1
4X θ1
α
L2
6. These Dimensions apply to the flat section of the lead between
0.08mm and 0.15mm from the lead tip.
7. Controlling dimension: MILLIMETER. Converted inch
dimensions are for reference only
8. Die is facing up for mold die and trim-form.
VIEW C
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
37
FN8082.16
May 4, 2009
Similar pages