Minmax AQF-30S05 Ac/dc power module 30w fully encapsulated plastic case Datasheet

AQF-30 SERIES
AC/DC Power Module 30W
FEATURES
►Fully encapsulated Plastic Case
►Single-, Dual- and Triple Output Models
►3 Mounting Versions:
- PCB Mounting with Solder Pins
- Chassis Mounting with Screw Terminals
- DIN-Rail Mounting
►Universal Input 85-264 VAC, 47- 440 Hz
►Protection Class ll
►Safety Approval to cUL/UL/IEC/EN 60950-1
►UL508 Approval (Option)
►Over Load and Over Voltage Protection
►3 Year Product Warranty
PRODUCT OVERVIEW
The MINMAX AQF-30 series is a new range of fully encapsulated AC/DC power supply modules. The product features EMI-filter to EN55022, class B and
EMS compliance to EN 61000-4 standard. Universal input voltage 85-264VAC and International safety approvals qualifies these power modules for
applications in products with worldwide markets. For industrial applications, the models for chassis mounting can also be supplied as option with UL508
approval.The AQF-30 series provide a cost effective solution for many space critical applications in commercial and industrial electronic equipment.
Model Selection Guide
Model Number PCB Mounting
Output
(For model with Chassis
Voltage
Output Current
Input Current
Max. capacitive
Efficiency
115VAC, 60Hz
@Max. Load
@No Load
mA(typ.)
mA(typ.)
Load
μF
(typ.)
@Max. Load
%
VDC
Max.
mA
Peak
mA
AQF-30S05
5
6000
---
557
60
8000
78
AQF-30S12
12
2500
---
543
60
3900
80
AQF-30S15
15
2000
---
543
60
3900
80
AQF-30S24
24
1250
---
543
60
1500
80
AQF-30S48
48
625
---
543
60
1000
80
AQF-30D12
±12
±1300
---
565
60
#1500
80
AQF-30D15
±15
±1000
---
543
60
#1500
80
572
60
572
60
572
60
572
60
588
60
483
60
Mounting, add suffix C)
AQF-30D512
AQF-30T512
AQF-30T512A
AQF-30T515
AQF-30T5312P
AQF-30T3512P
*5
3000
*12
1250
*5
3000
12
600
-12
-600
*5
3000
12
1000
-12
-250
*5
3000
15
500
-15
-500
*5
4500
+3.3
1000
+12
250
*3.3
4000
+5
1500
+12
250
* Output floating (note 6)
E-mail:[email protected]
2012/11/14 REV:19
Tel:886-6-2923150
Page 1 of 5
4500
1800
4500
900
900
4500
1500
500
4500
750
750
6000
1500
500
5300
2000
500
3900
1500
2200
1500
1500
2200
1500
1500
2200
1500
1500
2200
2200
1500
2200
2200
1500
# For each output
76
76
76
76
71
71
AQF-30 SERIES
AC/DC POWER MODULE 30W
Input Specifications
Parameter
Input Voltage Range
Input Frequency Range
Input Voltage Range
Model
Min.
85
47
120
-----
All Models
115VAC
230VAC
Inrush Current (Cold Start at 25℃)
Typ.
-----------
Max.
264
440
370
20
40
Unit
VAC
Hz
VDC
A
A
Output Specifications
Parameter
Conditions
Single / Dual Output
Output Voltage Accuracy
Vo1
Vo2&Vo3
Dual Positive / Triple Output
Line Regulation
Load Regulation
Iout=Min. to Max.
Vo1
Vo2
Vo3
Cross RegulationDual / Triple Output Models
Vin=Min. to Max.
Single Output Models
Dual Output Models
Vo1
Triple Output Models
Vo2&Vo3
Measured output Io = 20% to 100% of rated load
Other output(s) set at 50% of rated load
3.3V & 5VDC Output Models
Other Output Models
Single-,Dual-Output Models and Main Output Triple Output Models
Auxiliary Outputs of Triple Output Models
Zener diode clamp
Ripple & Noise (20MHz)
Minimum Load
Over Voltage Protection
Temperature Coefficient
Overshoot
Min.
-------------------------------------
Foldback, auto-recovery
105
(long term overload condition may cause damage)
Hiccup mode, indefinite (automatic recovery)
Current Limitation
Short Circuit Protection
Typ.
±1.0
±1.0
±3.0
±0.2
±0.5
±2.5
±2.5
±4.0
±2.0
±5.0
±5.0
1.5
1.0
10
20
120
±0.02
---
Max.
±2.0
±2.0
--±1.0
±1.0
±5.0
±5.0
--------1.8
1.3
--------5
Unit
%
%
%
%
%
%
%
%
%
%
%
%VPP of Vo
%VPP of Vo
%Inom.
%Inom.
% of Vo
%/℃
% Vout
---
---
% Inom.
General Specifications
Parameter
I/O Isolation Voltage
I/O Isolation Resistance
Switching Frequency
Hold-up Time
MTBF (calculated)
EMC Emission
Conditions
Input to Output, 60 Seconds
500 VDC
MIL-HDBK-217F@25℃, Ground Benign
Conducted and radiated
Standard
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EMC Immunity according
EN61000-6-1
EN61000-4-6
EN61000-4-8
EN61000-4-11
Protection Class II
Safety Approvals
Min.
Typ.
Max.
Unit
3000
----VACrms
100
----MΩ
--100
--KHz
--20
--ms
200,000
----Hours
EN 55011 class B, EN 55022 class B, FCC part 15 class B
Specification Requirement
Performance Criteria
B
Air ±8KV Cont. ±4KV
A
80~1000MHz, 10V/m 80% AM, 1KHz modulation
B
AC port ±2KV DC, SL, TL ±2KV not less than 1 min.
B
1.2/50uS(8/20μS) AC dif. ±1KV DC ±0.5KV
0.15~80MHz, 10Vrms (functional earth ports included)
B
80% AM, 1KHz modulation
A
50Hz/60Hz, 30A/m
B
30%, 10ms
C
60%, 100ms, 95%, 5000ms
According IEC/EN 60536
cUL/UL 60950-1,IEC/EN 60950-1
(UL508 for models with order code suffix ICE only)
Input Fuse
All Models
Built-in Fuse
External Fuse (Recommended)
E-mail:[email protected]
2012/11/14 REV:19
3.5A / 250VAC
1.5A Slow – Blow Type
Tel:886-6-2923150
Page 2 of 5
AQF-30 SERIES
AC/DC POWER MODULE 30W
Environmental Specifications
Parameter
Temperature Range (operational)
Power Derating
Storage Temperature Range
Over Temperature Protection
Cooling
Humidity (non condensing)
Conditions
-25℃
Ambient
+50℃ to +70℃
+70℃
1.125W / ℃
+85℃
-40℃
at 90℃ (automatic recovery at 67℃)
Free-Air convection
---
95 % rel. H
Notes
1
All specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage and after warm-up time rated output current unless otherwise noted.
2
Ripple & Noise measurement bandwidth is 0~20 MHz
3
These power modules require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage the power
4
Other input and output voltage may be available, please contact factory.
supplies however they may not meet all listed specifications.
5
Peak current can't be drawn from all output at the same time.
6
Floating (or isolated) output of a power supply that is not connected to any other output.
7
To order the module with chassis mount package, please add a suffix C (e.g. AQF-30S05C).
8
To order the module with UL508 safety, please add a suffix ICE (e.g. AQF-30S05ICE).
9
Part number for DIN-Rail mounting bracket: AC-DIN-02
10
Specifications are subject to change without notice
Package Specifications PCB Mounting
Mechanical Dimensions
Pin Connections
6.0 [0.24]
15.24
[0.60]
12.7
[0.50]
15.24
[0.60]
12.7
[0.50]
21.7 [0.85]
0.7 [0.03]
Pin
Single
Dual
(D12,D15)
1
1.0 [ 0.04]
4
3
26.75 [1.05]
+Vout
4
No Pin
-Vout
6
88.9 [3.50]
81.3 [3.20]
27.5 [1.08]
+Vout
Common
No Pin
7
NC
+Vout2
+Vout2
+Vout2
+Vout1
+Vout1
+Vout1
-Vout2
Com.
2/3
-Vout1
-Vout1
NC
-Vout3
+Vout3
1
5.0 [0.20]
31.45 [1.24]
2
►All
55.88 [2.20]
63.5 [2.50]
►Pin
Physical Characteristics
Case Size
:
Case Material
:
Plastic resin + Fiberglass (flammability to UL 94V-0 rated)
Pin Material
:
Copper Alloy with Gold Plate Over Nickel Subplate
Weight
:
177g
88.9x63.5x21.7mm (3.50x2.50x0.85 inches)
E-mail:[email protected]
2012/11/14 REV:19
dimensions in mm (inches)
►Tolerance: ±0.5
Tel:886-6-2923150
Page 3 of 5
Com. 2/3
-Vout1
-Vout
NC: No Connection
Bottom View
Triple
(T5312P,T3512P)
AC(L) – AC Line
3
5
Mounting M4.0 Thread
Triple
AC(N) – AC Neutral
2
5
6
7
Dual
(D512)
(±0.02)
diameter  1.0 ±0.1 (0.04±0.004)
AQF-30 SERIES
AC/DC POWER MODULE 30W
Package Specifications Chassis Mounting (order code suffix C)
Mechanical Dimensions
Connections
Termina
Single
l
4 x 3.5
Dual
(D12,D15)
1
+Vout
4
-Vout
6
Common
NC
7
92.0 [3.62]
+Vout
NC
5
100.0 [3.94]
112.0 [4.41]
NC
10.0 [0.39]
-Vout
+Vout2
+Vout2
+Vout2
+Vout1
+Vout1
+Vout1
Com. 2/3
-Vout2
Com. 2/3
-Vout1
-Vout1
-Vout1
NC
-Vout3
+Vout3
16.8 [0.66]
5.0 [0.20]
25.6 [1.01]
NC: No Connection
►All
dimensions in mm (inches)
►Tolerance: X.X±0.5
(X.XX±0.02)
X.XX±0.25 ( X.XXX±0.01)
►Pin
pitch tolerance: ±0.25 (0.01)
Physical Characteristics
Case Size
:
Case Material
:
Plastic resin + Fiberglass (flammability to UL 94V-0 rated)
Weight
:
191g
112.0x63.8x25.6mm (4.41x2.51x1.01 inches)
Package Specifications with DIN Rail Mounting Bracket (order code AC-DIN-02)
Mechanical Dimensions
Indication LED
Top view
2
1
50.0 [1.97]
7
6
5
4
3
63.8 [2.51]
4 x 3.5
POWER"GOOD"INDICATOR
100.0 [3.94]
112.0 [4.41]
25.6 [1.01]
11.0 [0.43]
3.0 [0.12]
5.0
[0.20]
10.0 [0.39]
16.8 [0.66]
92.0 [3.62]
Physical Characteristics
Case Size
:
Case Material
:
112.0x63.8x25.6mm (4.41x2.51x1.01 inches)
Plastic resin + Fiberglass (flammability to UL 94V-0 rated)
Weight
:
245g
E-mail:[email protected]
2012/11/14 REV:19
Tel:886-6-2923150
Page 4 of 5
Triple
(T5312P,T3512P)
AC(L) – AC Line
3
POWER"GOOD"INDICATOR
Triple
AC(N) – AC Neutral
2
63.8 [2.51]
Indication LED
2
Top view
50.0 [1.97]
1
7
6
5
4
3
Dual
(D512)
AQF-30 SERIES
AC/DC POWER MODULE 30W
DIN-Rail Mounting Kit
Minmax Technology Co., Ltd.
18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan
Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected]
2012/11/14 REV:19
Page 5 of 5
Similar pages