Cree® P4 LED CP41B-RDS/ADS (40 degrees) CP41B-RFS/AFS (70 degrees) CP41B-RHS/AHS (100 degrees) Data Sheet This revolutionary package design allows the lighting designer to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with other LED solutions. This is possible through the efficient optical package design and high-current capabilities. The low-profile package can be easily coupled with reflectors or lenses to efficiently distribute light and provide the desired lit appearance. This product family employs red and amber LED materials, which allows designers to match the color of many lighting applications like vehicle signal lamps, channel letters and gaming-equipment lighting. APPLICATIONS • Size (mm): 7.6 x 7.6 • Channel Letter • Color and Typical Dominant Wavelength (nm): »» Red (628) »» Amber (591) • Amusement • Luminous Flux (mlm) »» CP41B-RDS (4400 - 11000) »» CP41B-RFS (4400 - 11000) »» CP41B-RHS (4400 - 13200) »» CP41B-ADS (4400 - 11000) »» CP41B-AFS (5500 - 13200) »» CP41B-AHS (5500 - 13200) • Lead-Free • RoHS Compliant 0 D-CT1143.00 Data Sheet: CL FEATURES Subject to change without notice. www.cree.com/ledlamps 1 Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit Red/Amber Forward Current Peak Forward Current IF 70 mA Note1 IFP 200 mA Reverse Voltage VR 5 V Power Dissipation PD 220 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Lead Soldering Temperature Tsol Note2 Max. 260°C for 5 sec. max. (3 mm from the base of the epoxy bulb) Note: 1. 2. A heat sink is recommended if the device is operated at ambient temperatures higher than 25°C. Pulse width ≤0.1 msec, duty ≤1/10. Typical Electrical & Optical Characteristics (TA = 25°C) Characteristics Color Symbol Condition Unit Minimum Typical Maximum 2.5 3.0 Forward Voltage Red/Amber VF IF = 70 mA V Reverse Current Red/Amber IR VR = 5 V μA Red λD IF = 70 mA nm 620 628 637 Amber λD IF = 70 mA nm 584 591 599 CP41B-RDS (40 degree) Φv IF = 70 mA mlm 4400 7000 Dominant Wavelength Red Luminous Flux CP41B-RFS (70 degree) Φv IF = 70 mA mlm 4400 7500 CP41B-RHS (100 degree) Φv IF = 70 mA mlm 5500 8000 CP41B-ADS (40 degree) Φv IF = 70 mA mlm 4400 6500 CP41B-AFS (70 degree) Φv IF = 70 mA mlm 5500 7500 CP41B-AHS (100 degree) Φv IF = 70 mA mlm 5500 8000 CP41B-RDS/ADS 2θ½ IF = 70 mA deg CP41B-RFS/AFS 2θ½ IF = 70 mA deg 70 CP41B-RHS/AHS 2θ½ IF = 70 mA deg 100 Amber 50% Power Angle Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2 100 CLD-CT1143.000 40 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Flux Bin Limit (IF = 70 mA) Amber Red CP41B-RDS/RFS (40/70 degree) Bin Code Min. (mlm) Max. (mlm) CP41B-ADS (40 degree) Bin Code Min. (mlm) Max. (mlm) L0 4400 5500 L0 4400 5500 M0 5500 6600 M0 5500 6600 N0 6600 8730 N0 6600 8730 P0 8730 11000 P0 8730 11000 CP41B-RHS (100 degree) CP41B-AFS/AHS (70/100 degree) Bin Code Min. (mlm) Max. (mlm) Bin Code Min. (mlm) Max. (mlm) L0 4400 5500 M0 5500 6600 M0 5500 6600 N0 6600 8730 N0 6600 8730 P0 8730 11000 P0 8730 11000 Q0 11000 13200 Q0 11000 13200 Tolerance of measurement of luminous Flux is ±15% Color Bin Limit (IF = 70 mA) Red Amber Bin Code Min. (nm) Max. (nm) Bin Code Min. (nm) Max. (nm) RE 620 637 A2 584 587 A3 587 590 A4 590 593 A5 593 596 A6 596 599 Tolerance of measurement of dominant wavelength is ±1 nm VF Bin Limit (IF = 70 mA) Red Amber Bin Code Min. (V) Max. (V) Bin Code Min. (V) Max. (V) 23 2.0 2.2 23 2.0 2.2 24 2.2 2.4 24 2.2 2.4 25 2.4 2.6 25 2.4 2.6 26 2.6 2.8 26 2.6 2.8 27 2.8 3.0 27 2.8 3.0 Tolerance of measurement of VF is ± 0.05 V Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 3 CLD-CT1143.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs IF (mA) 100.0 1.25 1.0 80.0 60.0 0.75 Red 40.0 0.5 Amber 1.8 2.0 2.2 2.4 2.6 VF(V) 2.8 Amber -60 -50 -40 -30 -20 0.0 0 20 40 60 80 IF(mA) 100 FIG.2 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. Vr(V) Red 0.25 20.0 0.0 IV(%) -10 (RELATIVE LUMINOUS INTENSITY) 0 100% -10 80% -20 60% -30 40% -40 20% Amber -50 Ir(uA) FIG.3 Red & Amber REVERSE CURRENT VS. REVERSE VOLTAGE. IF(mA) 100 0% 300 400 500 Red 600 700 WL(nm) 800 900 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. CP41B-RDS/ADS 50% Power Angle : 40 IV(%) 0 1.0 80 60 40 0.5 20 Ta( C) 40 20 60 80 100 0 FIG.5 Red & Amber MAXIMUM FORWARD DCCURRENT VS AMBIENT TEMPERATURE (Tjmax=120 C) 0 0 -60 -90 -30 FIG.6 FAR FIELD PATTERN Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 6 CLD-CT1143.000 0 30 60 Angle 90 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs 1.0 IV(%) CP41B-RHS/AHS 50% Power Angle : 70 0 1.0 0.5 CP41B-RFS 50% Power Angle : 100 0 0.5 0 -90 -60 -30 0 30 60 Angle 90 FIG.7 FAR FIELD PATTERN 1.0 IV(%) IV(%) CP41B-AFS 0 -60 -90 -30 FIG.8 FAR FIELD PATTERN 0 30 60 Angle 90 50% Power Angle : 100 0 0.5 0 -60 -90 -30 FIG.9 FAR FIELD PATTERN 0 30 60 Angle 90 Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 7 CLD-CT1143.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Mechanical Dimensions All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted. An epoxy meniscus may extend about 1.5 mm down the leads. Document No. Rev. No. Burr around bottom of epoxy may be 0.5 mm max. Applications: - SPE/LP377UHR1-70G-01-MT 00 Dimension Drawing CP41B-RDS/RFS/ADS/AFS: CP41B-RHS/AHS: Advertising Signs Indicators Traffic Automotive Lighting Absolute Maximum Ratings at Ta = 25°C Items Absolute maximum Symbol Rating Unit IF 70 mA Peak Forward Current*1 IFP 200 mA Reverse Voltage VR 5 V Power Dissipation PD 210 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Forward Current *2 Lead Soldering Temperature Electrostatic Discharge Classification (MIL-STD-883E) *1 pulse width <=0.1msec Notes Max.260°C for 5 sec Max. Tsol (3mm from the base of the epoxy bulb) ESD Class II duty <=1/10 *2 Heat sink is recommended to be adequated if the device is operated at ambient temperatures higher than 25 deg C. For long term performance the drive currents between 10mA and 50mA are recommended. Please contact COTCO sales representative for more RoHS Compliance information on recommended drive conditions. The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the limits) Typicthreshold al Electric al & Opermitted ptical Chafor racsuch teristsubstances, ics ( Ta = 25or ) used in an exempted application, in accordance with EU Direc°Care tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Items Symbol Condition Min. Typ. Max. Unit Forward Voltage VF IF = 70mA --- 2.5 3.0 V Reverse Current IR VR = 5V --- --- 100 µA Dominant Wavelength λD IF = 70mA 618 624 630 nm Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2009 Cree, Inc. All rightsΦ reserved. The information in this document is subject to change without notice. Cree and Luminous Flux IF = 70mA 4400 7500 --the Cree logo are registered trademarks Vof Cree, Inc. 8 CLD-CT1143.000 50% Power Angle 2θ½ IF = 70mA --- 70 --- Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps mlm deg Package Features: • • • • • The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shock during transportation. The boxes are not water-resistant, and they must be kept away from water and moisture. The Tube Pack type of packaging. Max 60 pcs per tube. R xxx xxx R C OL OR LED LAMP T YPE LXXXXXXXX-XXX LOT J OWAXXXXX -XX-XXX QT Y RANK P CS Iv Vf Hu e X XX XX AX XXX XXX XXX X Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 10 CLD-CT1143.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps