2.2x1.4mm SURFACE MOUNT LED LAMP Part Number: AA2214VR4D1S-C1 ATTENTION Cool White OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description 2.2mm x 1.4mm, 1.3mm high. The source color devices are made with InGaN Light Emitting Low power consumption. Diode. Available on tape and reel. Static electricity and surge damage the LEDS. Package : 2000pcs / reel. It is recommended to use a wrist band or anti-electrostatic Moisture sensitivity level : level 3. glove when handling the LEDs. RoHS compliant. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAM6269 APPROVED: WYNEC REV NO: V.2B CHECKED: Allen Liu DATE: MAR/07/2014 PAGE: 1 OF 7 DRAWN: F.Cui ERP: 1201005923 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. 4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. 5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances. SPEC NO: DSAM6269 APPROVED: WYNEC REV NO: V.2B CHECKED: Allen Liu DATE: MAR/07/2014 PAGE: 2 OF 7 DRAWN: F.Cui ERP: 1201005923 Selection Guide Part No. AA2214VR4D1S-C1 Dice Cool White Lens Type Water Clear Viewing Angle [1] Iv (mcd) [2] @ 20mA CCT Range Min. Typ. Max. Min. Typ. 2θ1/2 5310K 6000K 7040K 1000 1300 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Typ. Max. Units Test Conditions VF [1] Forward Voltage 3.3 4.0 V IF=20mA IR Reverse Current 50 uA VR = 5V C Capacitance pF VF=0V;f=1MHz 100 Note: 1. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Cool White Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAM6269 APPROVED: WYNEC REV NO: V.2B CHECKED: Allen Liu DATE: MAR/07/2014 PAGE: 3 OF 7 DRAWN: F.Cui ERP: 1201005923 Cool White SPEC NO: DSAM6269 APPROVED: WYNEC AA2214VR4D1S-C1 REV NO: V.2B CHECKED: Allen Liu DATE: MAR/07/2014 PAGE: 4 OF 7 DRAWN: F.Cui ERP: 1201005923 CCT 2500-7000 K Bin Code 0.44 3000 K 2500 K 4000 K 0.42 7 9 0.40 17 y 6000 K 19 21 7000 K 0.34 25 27 0.32 28 0.30 0.28 0.30 16 18 20 23 12 14 1 2 4 6 8 10 15 0.38 0.36 11 13 5000 K 3 5 W1 W2 W3 N1 22 N2 24 26 C1 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 x Color Group Chromaticity Regions Warm White Neutral White Cool White 1 2 3 4 5 6 7 W1 W2 W3 N1 N2 C1 1, 2, 3, 4 5, 6, 7, 8 9, 10, 11, 12 13, 14, 15, 16 17, 18, 19, 20, 21, 22 23, 24, 25, 26, 27, 28 Min. 2580 2870 3220 3710 4260 5310 CCT (K) Typ. 2700 3000 3500 4000 4700 6000 Max. 2870 3220 3710 4260 5310 7040 Notes: Shipment may contain more than one chromaticity regions.Orders for single chromaticity region are generally not accepted. Measurement tolerance of the chromaticity coordinates is ±0.01. x y x y x y x y 0.4582 0.4687 0.4813 0.4099 0.4289 0.4319 0.4147 0.4221 0.4342 0.3814 0.3984 0.4028 0.3702 0.3736 0.3869 0.3722 0.3874 0.3958 0.3481 0.3370 0.3364 0.3557 0.3472 0.3328 0.4700 0.4126 0.4259 0.3853 0.3825 0.3798 0.3466 0.3411 0.4483 0.3919 0.4080 0.3916 0.3670 0.3578 0.3376 0.3616 0.4582 0.4099 0.4146 0.4089 0.3702 0.3722 0.3260 0.3512 0.4700 0.4593 0.4126 0.3944 0.4299 0.4221 0.4165 0.3984 0.3825 0.3783 0.3798 0.3646 0.3265 0.3370 0.3371 0.3472 0.4465 0.4071 0.4017 0.3751 0.3736 0.3874 0.3370 0.3472 0.4562 0.4687 0.4582 0.4260 0.4289 0.4099 0.4080 0.4221 0.4147 0.3916 0.3984 0.3814 0.3616 0.3592 0.3703 0.3788 0.3641 0.3726 0.3265 0.3270 0.3364 0.3371 0.3230 0.3328 0.4373 0.3893 0.3941 0.3848 0.3703 0.3726 0.3260 0.3512 0.4465 0.4071 0.3996 0.4015 0.3592 0.3641 0.3144 0.3408 0.4582 0.4099 0.4146 0.4089 0.3568 0.3495 0.3160 0.3274 0.4483 0.3919 0.4080 0.3916 0.3670 0.3578 0.3265 0.3371 0.4342 0.4028 0.3889 0.3690 0.3616 0.3788 0.3265 0.3371 0.4430 0.4212 0.3941 0.3848 0.3496 0.3702 0.3160 0.3274 0.4562 0.4260 0.4080 0.3916 0.3481 0.3557 0.3175 0.3139 0.4465 0.4071 0.4017 0.3751 0.3592 0.3641 0.3270 0.3230 0.4259 0.3853 0.3825 0.3798 0.3592 0.3641 0.3144 0.3408 0.4342 0.4028 0.3869 0.3958 0.3481 0.3557 0.3028 0.3304 0.4465 0.4071 0.4006 0.4044 0.3466 0.3411 0.3055 0.3177 0.4373 0.3893 0.3950 0.3875 0.3568 0.3495 0.3160 0.3274 0.4221 0.3984 0.3783 0.3646 0.3496 0.3702 0.3160 0.3274 0.4299 0.4165 0.3825 0.3798 0.3376 0.3616 0.3055 0.3177 0.4430 0.4212 0.3950 0.3875 0.3370 0.3472 0.3081 0.3049 0.4342 0.4028 0.3898 0.3716 0.3481 0.3557 0.3175 0.3139 SPEC NO: DSAM6269 APPROVED: WYNEC 8 9 10 11 12 13 14 REV NO: V.2B CHECKED: Allen Liu 15 16 17 18 19 20 21 22 23 24 25 26 27 28 DATE: MAR/07/2014 PAGE: 5 OF 7 DRAWN: F.Cui ERP: 1201005923 AA2214VR4D1S-C1 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAM6269 APPROVED: WYNEC REV NO: V.2B CHECKED: Allen Liu DATE: MAR/07/2014 PAGE: 6 OF 7 DRAWN: F.Cui ERP: 1201005923 PACKING & LABEL SPECIFICATIONS AA2214VR4D1S-C1 Terms and conditions for the usage of this document 1.The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2.The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3.When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4.The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5.The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6.All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAM6269 APPROVED: WYNEC REV NO: V.2B CHECKED: Allen Liu DATE: MAR/07/2014 PAGE: 7 OF 7 DRAWN: F.Cui ERP: 1201005923 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Kingbright: AA2214VR4D1S-C1