Coilcraft DS3316P Smt power inductor Datasheet

Document 187-1
SMT Power Inductors – DS3316P Series
Magnetic shielding and high efficiency are features of
the DS3316 family of power inductors. They are designed for high performance DC-DC converter applications, especially those requiring shielding.
The terminations wrap around the end of the base,
ensuring a sound solder fillet and simplifying inspection.
Saturation current ratings up to 11 A and rms current
ratings as high as 5 A are available. DC resistance as
low as 0.021 Ohms keeps power losses to a minimum.
For new designs, consider the MSS1038 as an alternative to this series. The MSS1038 series is more cost
effective, features a smaller footprint, lower profile, lower
DCR and better current handling. We will continue to
manufacture and support the DS3316 indefinitely.
Part number1
DS3316P-102ML_
DS3316P-152ML_
DS3316P-222ML_
DS3316P-332ML_
DS3316P-472ML_
DS3316P-682ML_
DS3316P-822ML_
DS3316P-103ML_
DS3316P-153ML_
DS3316P-223ML_
DS3316P-333ML_
DS3316P-473ML_
DS3316P-683ML_
DS3316P-104ML_
DS3316P-154ML_
DS3316P-224ML_
DS3316P-105ML_
L
DCR
±20%2
max
(µH)
(Ohms)
1.0
0.021
1.5
0.022
2.2
0.032
3.3
0.039
4.7
0.054
6.8
0.075
8.2
0.085
10
0.101
15
0.150
22
0.207
33
0.334
47
0.472
68
0.660
100
1.11
150
1.55
220
2.00
1000
8.30
SRF
typ
Isat3
(MHz) (A)
140 11.0
120
9.5
80
7.8
70
6.0
40
5.4
38
4.5
36
4.0
35
3.5
25
3.0
19
2.0
15
1.8
13
1.4
10
1.3
7
1.2
6
0.80
5
0.70
2
0.32
Irms4
(A)
5.0
4.5
3.8
3.3
2.7
2.2
2.1
2.0
1.5
1.3
1.1
0.80
0.70
0.60
0.50
0.37
0.17
1. When ordering, please specify termination and packaging codes:
DS3316P-105MLD
Termination: L = RoHS compliant gold over nickel over phos bronze.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
2. Inductance tested at 0.1 Vrms, 100 kHz, 0 Adc.
3. DC current at which the inductance drops 10% (typ) from its value
without current.
4. Current that causes a 40°C temperature rise from 25°C ambient.
5. Ambient temperature range: –40°C to +85°C with Irms current
+85°C to +125°C with derated current
6. Storage temperature range: Component: –40°C to +125°C
Packaging: –55°C to +80°C
7. Resistance to soldering heat: Three reflows at >217°C for 90 seconds
(+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room
temperature between.
8. Electrical specifications at 25°C.
See Qualification Standards section for environmental and test data.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2007
Document 187-1
Revised 09/20/07
Document 187-2
SMT Power Inductors - DS3316P Series
Typical L vs Frequency
Typical L vs Current
1000
Inductance (µH)
100
47 µH
10 µH
10
1.0 µH
1
0.1
0.1
10
1
100
Current (A)
0.190
dia
4,83
Irms Derating
120
0.370
max
9,40
110
90
0.330
dia
8,38
80
*
0.200
max
5,08
70
60
an additional 0.02/0,508
*Allow
in width and 0.01/0,254 in
height for optional tin-lead and
tin-silver-copper application.
*
0.510
max
12,95
50
40
25°C
Percent of rated Irms
100
30
Recommended
Land Pattern
0.145
3,69
0.100
2,54
0.290
7,37
20
0.110
2,79
10
0.115
2,92
0
-40
-20
0
20
40
60
80
Ambient temperature (°C)
100
120 140
0.100
2,54
0.300
7,62
Internal
code
Dash
number
XXX
X
Part marking since Feb. 2005. Parts manufactured
prior to that date may have color dots.
Visit www.coilcraft.com/colrpowr.cfm for details.
Weight:
0.82 – 0.87 g
Tape and reel: 1000/13″ reel 24 mm tape width
For packaging data see Tape and Reel Specifications section.
Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2007
Document 187-2
Revised 09/20/07
Similar pages