ON MR852 Axial lead fast recovery rectifier Datasheet

MR850, MR851, MR852,
MR854, MR856
Axial Lead Fast
Recovery Rectifiers
Axial lead mounted fast recovery power rectifiers are designed for
special applications such as dc power supplies, inverters, converters,
ultrasonic systems, choppers, low RF interference and free wheeling
diodes. A complete line of fast recovery rectifiers having typical
recovery time of 100 nanoseconds providing high efficiency at
frequencies to 250 kHz.
Features
http://onsemi.com
FAST RECOVERY
POWER RECTIFIERS
3.0 AMPERES, 50−600 VOLTS
• These are Pb−Free Devices*
Mechanical Characteristics:
• Case: Epoxy, Molded
• Weight: 1.1 Gram (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead Temperature for Soldering Purposes:
•
•
260°C Max. for 10 Seconds
Available Tape and Reel, 1200 per Reel, by adding a “RL” Suffix
to the Part Number
Polarity: Cathode Indicated by Polarity Band
AXIAL LEAD
CASE 267
STYLE 1
MARKING DIAGRAM
A
MR85x
YYWW G
G
A
= Assembly Location
MR85x = Device Number
x = 0, 1, 2, 4 or 6
YY
= Year
WW
= Work Week
G
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 3 of this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2011
May, 2011 − Rev. 6
1
Publication Order Number:
MR850/D
MR850, MR851, MR852, MR854, MR856
MAXIMUM RATINGS
Symbol
MR850
MR851
MR852
MR854
MR856
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Rating
VRRM
VRWM
VR
50
100
200
400
600
V
Non−Repetitive Peak Reverse Voltage
VRSM
75
150
250
450
650
V
VR(RMS)
35
70
140
280
420
V
RMS Reverse Voltage
Average Rectified Forward Current
(Single phase resistive load, TA = 80°C)
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions)
Operating and Storage Junction Temperature Range
IO
3.0
A
IFSM
100
(one cycle)
A
TJ, Tstg
− 65 to +125
− 65 to +150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
THERMAL CHARACTERISTICS
Characteristic
Symbol
Max
Unit
Thermal Resistance, Junction−to−Ambient (Note 1)
RqJA
28
°C/W
Thermal Resistance, Junction−to−Lead (Note 1)
RqJL
5.5
°C/W
1. Mounted with minimum recommended pad size, PC board FR−4.
ELECTRICAL CHARACTERISTICS
Characteristic
Symbol
Min
Typ
Max
Unit
Forward Voltage
(IF = 3.0 A, TJ = 25°C)
VF
−
1.04
1.25
V
Reverse Current (rated DC voltage) TJ = 25°C
MR850
MR851
MR852
TJ = 80°C
MR854
MR856
IR
−
−
−
−
−
−
2.0
−
60
−
−
100
10
150
150
200
250
300
mA
Symbol
Min
Typ
Max
Unit
−
−
100
150
200
300
−
−
2.0
REVERSE RECOVERY CHARACTERISTICS
Characteristic
Reverse Recovery Time
(IF = 1.0 A to VR = 30 Vdc)
(IF = 15 A, di/dt = 10 A/ms)
trr
Reverse Recovery Current
(IF = 1.0 A to VR = 30 Vdc)
IRM(REC)
http://onsemi.com
2
ns
A
MR850, MR851, MR852, MR854, MR856
ORDERING INFORMATION
Package
Shipping†
MR850
Axial Lead*
500 Units / Box
MR851
Axial Lead*
500 Units / Box
MR851G
Axial Lead*
500 Units / Box
MR851RL
Axial Lead*
1200 / Tape & Reel
MR851RLG
Axial Lead*
1200 / Tape & Reel
MR852
Axial Lead*
500 Units / Box
MR852G
Axial Lead*
500 Units / Box
MR852RL
Axial Lead*
1200 / Tape & Reel
MR852RLG
Axial Lead*
1200 / Tape & Reel
MR854
Axial Lead*
500 Units / Box
MR854G
Axial Lead*
500 Units / Box
MR854RL
Axial Lead*
1200 / Tape & Reel
MR854RLG
Axial Lead*
1200 / Tape & Reel
MR856
Axial Lead*
500 Units / Box
MR856G
Axial Lead*
500 Units / Box
MR856RL
Axial Lead*
1200 / Tape & Reel
MR856RLG
Axial Lead*
1200 / Tape & Reel
Device
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*These packages are inherently Pb−Free.
http://onsemi.com
3
MR850, MR851, MR852, MR854, MR856
PACKAGE DIMENSIONS
AXIAL LEAD
CASE 267−05
(DO−201AD)
ISSUE G
K
D
A
1
B
2
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
DIM
A
B
D
K
K
INCHES
MIN
MAX
0.287
0.374
0.189
0.209
0.047
0.051
1.000
---
MILLIMETERS
MIN
MAX
7.30
9.50
4.80
5.30
1.20
1.30
25.40
---
STYLE 1:
PIN 1. CATHODE (POLARITY BAND)
2. ANODE
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
4
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MR850/D
Similar pages