MA-COM MASWSS0166SMB Gaas spdt switch dc - 3.0 ghz Datasheet

MASWSS0166
GaAs SPDT Switch
DC - 3.0 GHz
Rev. V2
Features
•
•
•
•
•
•
•
•
Low Insertion Loss: 0.3 dB @ 900 MHz
Low Current Consumption: <15 µA @ +2.5 V
Positive or Negative 2.5 to 8 V Control
Lead-Free SOT-363 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of SW-437
Functional Schematic:
Positive Control Voltage
Description
M/A-COM’s MASWSS0166 is a GaAs monolithic
switch in a lead-free SOT-363 surface mount plastic
package. The MASWSS0166 is ideally suited for
applications where very low power consumption, low
insertion loss, very small size and low cost are required.
Functional Schematic:
Negative Control Voltage
Typical applications are dual band systems that require switching between small signal components
such as filter banks, single band LNA’s and converters. The MASWSS0166 can be used in applications
up to 0.25 Watts in systems such as cellular, PCS,
DCS1800, GSM, CDMA, W-CDMA and other analog/digital wireless communications systems.
The MASWSS0166 is fabricated using a mature 0.5
micron GaAs PHEMT process. The process features full passivation for increased performance and
reliability.
Pin Configuration
Pin No.
Function
Description
1
RF1
RF in/out
2
GND
RF Ground
3
RF2
RF in/out
4
V2
V Control 2
5
RFC
RF Common
6
V1
V Control 1
Absolute Maximum Ratings 1,2
Parameter
Absolute Maximum
Input Power (0.5-3.0 GHz)
3 V Control
5 V Control
+30 dBm
+33 dBm
Operating Voltage
+8.5 Volts
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
1. Exceeding any one or combination of these limits may cause
permanent damage to this device.
2. M/A-COM does not recommend sustained operation near
these survivability limits.
Ordering Information 3
Part Number
Package
MASWSS0166
Bulk Packaging
MASWSS0166TR-3000
3000 piece reel
MASWSS0166SMB
Sample Test Board
3. Reference Application Note M513 for reel size information.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASWSS0166
GaAs SPDT Switch
DC - 3.0 GHz
Rev. V2
Electrical Specifications: TA = 25°C, Vc = 0 V / -2.5 V, Z0 = 50Ω 4
Parameter
Test Conditions
Units
Min.
Typ.
Max.
Insertion Loss
DC - 1 GHz
1 - 2 GHz
2 - 3 GHz
dB
dB
dB
—
—
—
0.3
0.4
0.55
0.4
0.5
0.7
Isolation
DC - 1 GHz
1 - 2 GHz
2 - 3 GHz
dB
dB
dB
19
13
10
21
15
12
—
—
—
VSWR
DC - 3 GHz
Ratio
—
1.2:1
—
P1dB
500 MHz - 3 GHz, ⏐Vc⏐ = 2.7 V
dBm
—
24
—
P1dB
500 MHz - 3 GHz, ⏐Vc⏐ = 5 V
dBm
—
27
—
Input IP2
2-Tone, 900 MHz, 5 MHz spacing, ⏐Vc⏐ = 2.7 V
dBm
—
81
—
Input IP3
2-Tone 900 MHz, 5 MHz spacing, ⏐Vc⏐ = 2.7V
dBm
—
55
—
Trise, Tfall
Ton, Toff
Transients
10% to 90% RF, 90% to 10% RF
50% Control to 90% RF, 50% Control to 10% RF
In-Band
nS
nS
mV
—
—
—
10
20
10
—
—
—
Control Current
⏐Vc⏐ = 2.5 V
µA
—
4
15
4. For positive voltage control, external DC blocking capacitors are required on all RF ports.
Lead-Free SOT-363 Plastic Package†
Truth Table 5,6
V1
V2
RFC-RF1
RFC-RF2
0
1
On
Off
1
0
Off
On
5. Differential voltage, V(state 1) - V(state 0), must be
+2.5 V minimum and must not exceed 8 V.
6. 0 = -8 V to 0 V, 1 = -5.5 V to 8 V
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
† Reference Application Note M538 for lead-free solder reflow
recommendations.
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASWSS0166
GaAs SPDT Switch
DC - 3.0 GHz
Rev. V2
Typical Performance Curves
Insertion Loss (Positive Voltage Control)
Insertion Loss (Negative Voltage Control)
1.0
1.0
0.8
-40°C
+25°C
+85°C
0.6
0.6
0.4
0.4
0.2
0.2
0.0
0.0
0.5
-40°C
+25°C
+85°C
0.8
1.0
1.5
2.0
2.5
3.0
0.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
2.5
3.0
Frequency (GHz)
Frequency (GHz)
Isolation
VSWR
1.5
40
35
Negative Control
Positive Control
1.4
30
1.3
25
1.2
20
1.1
15
10
0.0
0.5
1.0
1.5
2.0
Frequency (GHz)
2.5
3.0
1.0
0.0
0.5
1.0
1.5
2.0
Frequency (GHz)
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
Similar pages