MMD MKL2025A Industry standard package Datasheet

MKP, MKL, and MKV Series
¾
Industry Standard Package
¾
Wide Frequency Range
¾
Tape and Reel Available
¾
1 pSec Jitter
ELECTRICAL SPECIFICATION:
LVDS
LVPECL
PECL
70.000MHz to 622.080MHZ
(See Part Number Guide for Options)
(See Part Number Guide for Options)
-55°C to +125°C
±5 ppm / yr max
1.43V typ
Vdd – 1.620 VDC max
Vdd – 1.620 VDC max
1.10V typ
Vdd- 1.025 vdc min
Vdd- 1.025 vdc min
50 mA max
50 mA max
N/A
60 mA max
60 mA max
N/A
N/A
N/A
140 mA max
(See Part Number Guide for Options)
2nSec max
50 Ohms into Vdd-2.00 VDC
10mSec max
1 pSec
Vih = 70% of Vdd min to Enable Output
Vil = 30% max or grounded to Disable Output (High Impedance)
Frequency Range
Frequency Stability*
Operating Temp.Range
Storage Temp. Range
Aging
Logic “0”
Logic “1”
2.5VDC ± 5%
3.3VDC ± 5%
5.0VDC ± 5%
Symmetry (50% of waveform)
Rise / Fall Time (20% to 80%)
Load
Start Time
Jitter (RMS)
Supply Voltage (Vdd)
Supply Current
Tri-State Operation
* Inclusive of Temp., Load, Voltage and Aging
MECHANICAL DIMENSIONS:
10.16 [.400]
6.10 [.240]
7.11 [.280]
0.79 [.031]
6.35 [.250]
PIN
PIN 1
PIN 2
PIN 3
PIN 4
PIN 5
PIN 6
2.54 [.100]
14.73 [.580]
3
2
4
5
1
6
5.08 [.200]
1.02 [.040]
1.27 [.050]
1.52 [.060]
CONNECTIONS
NO CONNECTION
TRI-STATE
CASE GROUND
OUTPUT
COMPL. OUTPUT
SUPPLY VOLTAGE
2.54 [.100]
DIMENSION IN BRACKETS ARE IN INCHES
EXTERNAL BYPASS CAPACITOR IS RECOMMENDED
UNIT IS NOT HERMETICALLY SEALED
RECOMMENDED
LAND PATTERN
PART NUMBERING GUIDE:
Frequency
MK
6 Pad SMD
Output
P = PECL
L = LVPECL
V = LVDS
Supply Voltage
2 = +2.5 VDC
3 = +3.3 VDC
5 = +5.0 VDC
Frequency
Stability
010 = ±10 ppm
020 = ±20 ppm
025 = ±25 ppm
050 = ±50 ppm
100 = ±100 ppm
Value Added Options
Operating
Temperature
Blank = 0°C to +70°C
48 = -40°C to +85°C
Symmetry
Blank = 40%/60%
A = 45%/55%
Blank = Bulk
T = Tape and Reel
Please check with factory for
availability of Tape and Reel
Please Consult with MMD Sales Department for any other Parameters or Options
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
[email protected]
Specifications subject to change without notice
Revision MKP020508E
Similar pages