Freescale MMZ09312B Heterojunction bipolar transistor Datasheet

Freescale Semiconductor
Technical Data
Document Number: MMZ09312B
Rev. 1, 2/2012
Heterojunction Bipolar Transistor
Technology (InGaP HBT)
MMZ09312BT1
High Efficiency/Linearity Amplifier
The MMZ09312B is a 2 -- stage high efficiency, Class AB InGaP HBT
amplifier designed for use as a linear driver amplifier in wireless base station
applications as well as an output stage in femtocell or repeater applications. It
is suitable for applications with frequencies from 400 to 1000 MHz such as
CDMA, GSM, LTE and ZigBee R at operating voltages from 3 to 5 Volts. The
amplifier is housed in a cost--effective, surface mount QFN plastic package.
• Typical Performance: VCC1 = VCC2 = VBIAS = 5 Volts, ICQ = 74 mA
Frequency
Pout
(dBm)
Gps
(dB)
ACPR
(dBc)
PAE
(%)
Test Signal
900 MHz
24
31.5
--50.0
26.0
IS--95 CDMA
750 MHz
17.5
32.0
--50.0
15.3
LTE
10/20 MHz
450 MHz
29
33.0
--40.0
57.0
400--1000 MHz, 31.7 dB
29.6 dBm
InGaP HBT
CASE 2131--01
QFN 3x3
PLASTIC
ZigBee
Features
• Frequency: 400--1000 MHz
• P1dB: 29.6 dBm @ 900 MHz
• Power Gain: 31.7 dB @ 900 MHz
• OIP3: 42 dBm @ 900 MHz
• Active Bias Control (adjustable externally)
• Single 3 to 5 Volt Supply
• Performs Well with Digital Predistortion Systems
• Single--ended Power Detector
• Cost--effective QFN Surface Mount Package
• In Tape and Reel. T1 Suffix = 1,000 Units, 12 mm Tape Width, 7 inch Reel.
Table 1. Typical Performance (1)
Table 2. Maximum Ratings
Rating
Characteristic
Symbol
450
MHz
900
MHz
Unit
Small--Signal Gain (S21)
Gp
33.8
31.7
dB
Input Return Loss (S11)
IRL
--22
--15
dB
Output Return Loss (S22)
ORL
--25
--18
dB
Power Output @ 1dB
Compression
P1dB
28.8
29.6
dBm
1. VCC1 = VCC2 = VBIAS = 5 Vdc, TA = 25°C, 50 ohm system, CW
Application Circuit
Symbol
Value
Unit
Supply Voltage
VCC
6
V
Supply Current
ICC
550
mA
RF Input Power
Pin
14
dBm
Storage Temperature Range
Tstg
--65 to +150
°C
Junction Temperature (2)
TJ
150
°C
2. For reliable operation, the junction temperature should not
exceed 150°C.
Table 3. Thermal Characteristics
Characteristic
Thermal Resistance, Junction to Case
Case Temperature 84°C, VCC1 = VCC2 = VBIAS = 5 Vdc
Symbol
Value (3)
Unit
RθJC
56
°C/W
3. Refer to AN1955, Thermal Measurement Methodology of RF Power Amplifiers. Go to http://www.freescale.com/rf.
Select Documentation/Application Notes -- AN1955.
© Freescale Semiconductor, Inc., 2011--2012. All rights reserved.
RF Device Data
Freescale Semiconductor, Inc.
MMZ09312BT1
1
Table 4. Electrical Characteristics (VCC1 = VCC2 = VBIAS = 5 Vdc, 900 MHz, TA = 25°C, 50 ohm system, in Freescale CW
Application Circuit)
Characteristic
Symbol
Min
Typ
Max
Unit
Small--Signal Gain (S21)
Gp
29
31.7
—
dB
Input Return Loss (S11)
IRL
—
--15
—
dB
Output Return Loss (S22)
ORL
—
--18
—
dB
Power Output @ 1dB Compression
P1dB
—
29.6
—
dBm
Third Order Output Intercept Point, Two--Tone CW
OIP3
—
42
—
dBm
Noise Figure
NF
—
4
—
dB
Supply Current (1)
ICQ
69
74
83
mA
Supply Voltage (1)
VCC
—
5
—
V
Table 5. ESD Protection Characteristics
Test Methodology
Class
Human Body Model (per JESD22--A114)
Meets 2000 V for all pins except:
Pin 11 meets 400 V
Pin 8 meets 200 V
Class 0 Rating
Machine Model (per EIA/JESD22--A115)
A
Charge Device Model (per JESD22--C101)
IV
Table 6. Moisture Sensitivity Level
Test Methodology
Rating
Package Peak Temperature
Unit
1
260
°C
Per JESD22--A113, IPC/JEDEC J--STD--020
1. For reliable operation, the junction temperature should not exceed 150°C.
VBA2
VBA1
VCC1
GND
BIAS
CIRCUIT
RFout
VBIAS
RFin
RFout
GND
VBA2 VCC1 GND
VCC2
GND
12
11
10
VBA1
1
9
VCC2
VBIAS
2
8
RFout
RFin
3
7
RFout
4
5
6
GND GND PDET
PDET
Figure 1. Functional Block Diagram
Figure 2. Pin Connections
MMZ09312BT1
2
RF Device Data
Freescale Semiconductor, Inc.
VBIAS
VCC1
L4
C1
R2
R1
12
1
C2
11
VCC2
C3
10
L3
9
BIAS
CIRCUIT
C10
RF
OUTPUT
C5
8
2
L5
C11
RF
INPUT
L2
7
3
L1
4
5
6
PDET
C4
Figure 3. MMZ09312B Test Circuit Schematic — 900 MHz, 5 Volt Operation
Table 7. MMZ09312B Test Circuit Component Designations and Values — 900 MHz, 5 Volt Operation
Part
Description
Part Number
Manufacturer
C1, C2
1 μF Chip Capacitors
GRM155R61A105KE15
Murata
C3
4.7 μF Chip Capacitor
GRM188R60J475KE19
Murata
C4
470 pF Chip Capacitor
GRM1555C1H471JA01
Murata
C5
100 pF Chip Capacitor
GRM1555C1H101JA01
Murata
C6, C7, C8, C9
Components Not Placed
C10
4.7 pF Chip Capacitor
04023J4R7BBSTR
AVX
C11
6.8 pF Chip Capacitor
04023J6R8BBSTR
AVX
L1
8.2 nH Chip Inductor
LL1608--FSL8N2JL
TOKO
L2
1.2 nH Chip Inductor
LL1608--FSL1N2S
TOKO
L3
33 nH Chip Inductor
0402CS--33NXGLW
Coilcraft
L4
22 nH Chip Inductor
0402CS--22NXGLW
Coilcraft
L5
3.3 nH Chip Inductor
0603CS--3N3XJLW
Coilcraft
R1
330 Ω, 1/16 W Chip Resistor
RC0402JR--07331RL
Yageo
R2
1.5 kΩ, 1/16 W Chip Resistor
RC0402JR--07152RL
Yageo
R3
Component Not Placed
PCB
0.014″, εr = 3.7
FR408
Isola
Note: Component numbers C6, C7, C8, C9 and R3 are labeled on board but not placed.
MMZ09312BT1
RF Device Data
Freescale Semiconductor, Inc.
3
VCC2
VCC1
VBIAS(1)
C1
C2
R3*
C3
L4
R2
C9*
R1
RFIN
L3
C8*
RFOUT
C6*
C10
C5
L5
L1
L2
C11
C7*
C4
QFN 3x3--12M
Rev. 1
PDET
(1) VBIAS [Board] supplies VBA1, VBA2 and VBIAS [Device].
Note: Component numbers C6*, C7*, C8*, C9* and R3* are labeled on board but not placed.
Figure 4. MMZ09312B Test Circuit Component Layout — 900 MHz, 5 Volt Operation
Table 7. MMZ09312B Test Circuit Component Designations and Values — 900 MHz, 5 Volt Operation
Part
Description
Part Number
Manufacturer
C1, C2
1 μF Chip Capacitors
GRM155R61A105KE15
Murata
C3
4.7 μF Chip Capacitor
GRM188R60J475KE19
Murata
C4
470 pF Chip Capacitor
GRM1555C1H471JA01
Murata
C5
100 pF Chip Capacitor
GRM1555C1H101JA01
Murata
C6, C7, C8, C9
Components Not Placed
C10
4.7 pF Chip Capacitor
04023J4R7BBSTR
AVX
C11
6.8 pF Chip Capacitor
04023J6R8BBSTR
AVX
L1
8.2 nH Chip Inductor
LL1608--FSL8N2JL
TOKO
L2
1.2 nH Chip Inductor
LL1608--FSL1N2S
TOKO
L3
33 nH Chip Inductor
0402CS--33NXGLW
Coilcraft
L4
22 nH Chip Inductor
0402CS--22NXGLW
Coilcraft
L5
3.3 nH Chip Inductor
0603CS--3N3XJLW
Coilcraft
R1
330 Ω, 1/16 W Chip Resistor
RC0402JR--07331RL
Yageo
R2
1.5 kΩ, 1/16 W Chip Resistor
RC0402JR--07152RL
Yageo
R3
Component Not Placed
PCB
0.014″, εr = 3.7
FR408
(Test Circuit Component Designations and Values table repeated for reference.)
Isola
MMZ09312BT1
4
RF Device Data
Freescale Semiconductor, Inc.
--6
40
--8
35
--10
30
--12
25
S21 (dB)
S11 (dB)
TYPICAL CHARACTERISTICS — 900 MHz, 5 VOLT OPERATION
85°C
--14
--40°C
--16
--20
700
820
880
940
85°C
20
10
VCC1 = VCC2 = VBIAS = 5 Vdc
760
25°C
15
25°C
--18
--40°C
1000
5
700
VCC1 = VCC2 = VBIAS = 5 Vdc
760
820
880
940
f, FREQUENCY (MHz)
f, FREQUENCY (MHz)
Figure 5. S11 versus Frequency versus
Temperature
Figure 6. S21 versus Frequency versus
Temperature
1000
0
--5
S22 (dB)
--10
--40°C
--15
25°C
--20
85°C
--25
--30
--35
700
VCC1 = VCC2 = VBIAS = 5 Vdc
760
820
880
940
1000
f, FREQUENCY (MHz)
Figure 7. S22 versus Frequency versus
Temperature
MMZ09312BT1
RF Device Data
Freescale Semiconductor, Inc.
5
TYPICAL CHARACTERISTICS — 900 MHz, 5 VOLT OPERATION
300
--30
--42
270
180
--48
--40°C
ACPR
--54
11
13
15
17
21
19
23
25
120
90
60
25°C
--57
--60
150
85°C
--40°C
--51
210
85°C
25°C
--45
240
ICC
30
ICC, COLLECTOR CURRENT (mA)
ACPR (dBc)
VCC1 = VCC2 = VBIAS = 5 Vdc, f = 900 MHz
--33 Single--Carrier IS--95, 9 Channel Forward
--36 750 kHz Measurement Offset
30 kHz Measurement Bandwidth
--39
0
27
Pout, OUTPUT POWER (dBm)
34
Gain
50
25°C
--40°C
45
40
Gps, POWER GAIN (dB)
32
30
28 VCC1 = VCC2 = VBIAS = 5 Vdc, f = 900 MHz
26 Single--Carrier IS--95, 9 Channel Forward
750 kHz Measurement Offset
24 30 kHz Measurement Bandwidth
22
85°C
10
25°C
5
16
11
20
15
PAE
18
30
25
--40°C
20
35
85°C
13
15
17
19
21
23
25
PAE, POWER ADDED EFFICIENCY (%)
36
0
27
P1dB, 1 dB COMPRESSION POINT, CW (dBm)
Figure 8. ACPR versus Collector Current versus
Output Power versus Temperature
32
--40°C
25°C
30
85°C
28
26
24
22
20
VCC1 = VCC2 = VBIAS = 5 Vdc
18
700
760
820
880
940
Pout, OUTPUT POWER (dBm)
f, FREQUENCY (MHz)
Figure 9. Power Gain versus Power Added
Efficiency versus Output Power versus Temperature
Figure 10. P1dB versus Frequency versus
Temperature, CW
1000
PDET, POWER DETECTOR (V)
2
1.8 VCC1 = VCC2 = VBIAS = 5 Vdc, f = 900 MHz
Single--Carrier IS--95, 9 Channel Forward
1.6 750 kHz Measurement Offset
1.4 30 kHz Measurement Bandwidth
--40°C
1.2
85°C
1
0.8
25°C
0.6
0.4
0.2
0
11
13
15
17
19
21
23
25
27
Pout, OUTPUT POWER (dBm)
Figure 11. Power Detector versus Output Power
versus Temperature
MMZ09312BT1
6
RF Device Data
Freescale Semiconductor, Inc.
VBIAS
VCC1
L4
C1
R2
R1
12
1
C2
11
VCC2
C3
10
L3
9
BIAS
CIRCUIT
C10
RF
OUTPUT
C5
8
2
L5
C11
RF
INPUT
L2
7
3
L1
4
5
6
PDET
C4
Figure 12. MMZ09312B Test Circuit Schematic — 900 MHz, 3.3 Volt Operation
Table 8. MMZ09312B Test Circuit Component Designations and Values — 900 MHz, 3.3 Volt Operation
Part
Description
Part Number
Manufacturer
C1, C2
1 μF Chip Capacitors
GRM155R61A105KE15
Murata
C3
4.7 μF Chip Capacitor
GRM188R60J475KE19
Murata
C4
470 pF Chip Capacitor
GRM1555C1H471JA01
Murata
C5
100 pF Chip Capacitor
GRM1555C1H101JA01
Murata
C6, C7, C8, C9
Components Not Placed
C10
4.7 pF Chip Capacitor
04023J4R7BBSTR
AVX
C11
6.8 pF Chip Capacitor
04023J6R8BBSTR
AVX
L1
8.2 nH Chip Inductor
LL1608--FSL8N2JL
TOKO
L2
1.2 nH Chip Inductor
LL1608--FSL1N2S
TOKO
L3
33 nH Chip Inductor
0402CS--33NXGLW
Coilcraft
L4
22 nH Chip Inductor
0402CS--22NXGLW
Coilcraft
L5
3.3 nH Chip Inductor
0603CS--3N3XJLW
Coilcraft
R1
82 Ω, 1/16 W Chip Resistor
RC0402JR--07820RL
Yageo
R2
470 Ω, 1/16 W Chip Resistor
RC0402JR--07471RL
Yageo
R3
Component Not Placed
PCB
0.014″, εr = 3.7
FR408
Isola
Note: Component numbers C6, C7, C8, C9 and R3 are labeled on board but not placed.
MMZ09312BT1
RF Device Data
Freescale Semiconductor, Inc.
7
VCC2
VCC1
VBIAS(1)
C1
C2
R3*
C3
L4
R2
C9*
R1
RFIN
L3
C8*
RFOUT
C6*
C10
C5
L5
L1
L2
C11
C7*
C4
QFN 3x3--12M
Rev. 1
PDET
(1) VBIAS [Board] supplies VBA1, VBA2 and VBIAS [Device].
Note: Component numbers C6*, C7*, C8*, C9* and R3* are labeled on board but not placed.
Figure 13. MMZ09312B Test Circuit Component Layout — 900 MHz, 3.3 Volt Operation
Table 8. MMZ09312B Test Circuit Component Designations and Values — 900 MHz, 3.3 Volt Operation
Part
Description
Part Number
Manufacturer
C1, C2
1 μF Chip Capacitors
GRM155R61A105KE15
Murata
C3
4.7 μF Chip Capacitor
GRM188R60J475KE19
Murata
C4
470 pF Chip Capacitor
GRM1555C1H471JA01
Murata
C5
100 pF Chip Capacitor
GRM1555C1H101JA01
Murata
C6, C7, C8, C9
Components Not Placed
C10
4.7 pF Chip Capacitor
04023J4R7BBSTR
AVX
C11
6.8 pF Chip Capacitor
04023J6R8BBSTR
AVX
L1
8.2 nH Chip Inductor
LL1608--FSL8N2JL
TOKO
L2
1.2 nH Chip Inductor
LL1608--FSL1N2S
TOKO
L3
33 nH Chip Inductor
0402CS--33NXGLW
Coilcraft
L4
22 nH Chip Inductor
0402CS--22NXGLW
Coilcraft
L5
3.3 nH Chip Inductor
0603CS--3N3XJLW
Coilcraft
R1
82 Ω, 1/16 W Chip Resistor
RC0402JR--07820RL
Yageo
R2
470 Ω, 1/16 W Chip Resistor
RC0402JR--07471RL
Yageo
R3
Component Not Placed
PCB
0.014″, εr = 3.7
FR408
Isola
(Test Circuit Component Designations and Values table repeated for reference.)
MMZ09312BT1
8
RF Device Data
Freescale Semiconductor, Inc.
0
38
--4
34
--8
30
--12
--16
85°C
--24
--28
700
760
18
14
25°C
VCC1 = VCC2 = VBIAS = 3.3 Vdc
820
880
85°C
25°C
22
--40°C
--20
--40°C
26
S21 (dB)
S11 (dB)
TYPICAL CHARACTERISTICS — 900 MHz, 3.3 VOLT OPERATION
940
10
700
1000
VCC1 = VCC2 = VBIAS = 3.3 Vdc
820
760
880
940
f, FREQUENCY (MHz)
f, FREQUENCY (MHz)
Figure 14. S11 versus Frequency versus
Temperature
Figure 15. S21 versus Frequency versus
Temperature
1000
0
--4
--8
S22 (dB)
25°C
--12
--40°C
--16
--20
85°C
--24
--28
700
VCC1 = VCC2 = VBIAS = 3.3 Vdc
760
820
880
940
1000
f, FREQUENCY (MHz)
Figure 16. S22 versus Frequency versus
Temperature
MMZ09312BT1
RF Device Data
Freescale Semiconductor, Inc.
9
TYPICAL CHARACTERISTICS — 900 MHz, 3.3 VOLT OPERATION
400
0
360
320
280
240
--24
--30
--36
200
ICC
25°C
85°C
--42
--48
--40°C
10
12
14
16
120
25°C
ACPR
80
85°C
--54
--60
160
--40°C
20
18
22
40
ICC, COLLECTOR CURRENT (mA)
ACPR (dBc)
VCC1 = VCC2 = VBIAS = 3.3 Vdc, f = 900 MHz
--6 Single--Carrier IS--95, 9 Channel Forward
--12 750 kHz Measurement Offset
30 kHz Measurement Bandwidth
--18
0
26
24
Pout, OUTPUT POWER (dBm)
--40°C
Gain
32
25°C
Gps, POWER GAIN (dB)
30
35
VCC1 = VCC2 = VBIAS = 3.3 Vdc, f = 900 MHz
Single--Carrier IS--95, 9 Channel Forward
24 750 kHz Measurement Offset
22 30 kHz Measurement Bandwidth
26
20
18
30
85°C
25
20
25°C
--40°C
15
10
PAE
16
5
14
10
45
40
85°C
28
50
12
14
16
18
20
22
24
PAE, POWER ADDED EFFICIENCY (%)
34
0
26
P1dB, 1 dB COMPRESSION POINT, CW (dBm)
Figure 17. ACPR versus Collector Current
versus Output Power versus Temperature
30
28
--40°C
25°C
26
85°C
24
22
20
18
VCC1 = VCC2 = VBIAS = 3.3 Vdc
16
700
760
820
880
940
Pout, OUTPUT POWER (dBm)
f, FREQUENCY (MHz)
Figure 18. Power Gain versus Power Added
Efficiency versus Output Power versus Temperature
Figure 19. P1dB versus Frequency versus
Temperature, CW
1000
PDET, POWER DETECTOR (V)
3
2.7 VCC1 = VCC2 = VBIAS = 3.3 Vdc, f = 900 MHz
Single--Carrier IS--95, 9 Channel Forward
2.4 750 kHz Measurement Offset
2.1 30 kHz Measurement Bandwidth
--40°C
1.8
1.5
85°C
1.2
0.9
0.6
25°C
0.3
0
10
12
14
16
18
20
22
24
26
Pout, OUTPUT POWER (dBm)
Figure 20. Power Detector versus Output Power
versus Temperature
MMZ09312BT1
10
RF Device Data
Freescale Semiconductor, Inc.
VBIAS
VCC1
L4
C1
R2
R1
12
1
C2
11
VCC2
C3
10
L3
9
BIAS
CIRCUIT
C10
RF
OUTPUT
C5
8
2
L5
C11
RF
INPUT
L2
7
3
L1
4
5
6
PDET
C4
Figure 21. MMZ09312B Test Circuit Schematic — 450 MHz, 5 Volt Operation
Table 9. MMZ09312B Test Circuit Component Designations and Values — 450 MHz, 5 Volt Operation
Part
Description
Part Number
Manufacturer
C1, C2
1 μF Chip Capacitors
GRM155R61A105KE15
Murata
C3
4.7 μF Chip Capacitor
GRM188R60J475KE19
Murata
C4
470 pF Chip Capacitor
GRM1555C1H471JA01
Murata
C5
100 pF Chip Capacitor
GRM1555C1H101JA01
Murata
C6, C7, C8, C9
Components Not Placed
C10
3.9 pF Chip Capacitor
04023J3R9BBSTR
AVX
C11
10 pF Chip Capacitor
04023J10R0BBSTR
AVX
L1
18 nH Chip Inductor
LL1608--FSL18N0S
TOKO
L2
1.2 nH Chip Inductor
LL1608--FSL1N2S
TOKO
L3
3.9 nH Chip Inductor
LL1608--FSL3N9S
TOKO
L4
12 nH Chip Inductor
LL1608--FSL12N0S
TOKO
L5
12 nH Chip Inductor
0603CS--12NXJL
Coilcraft
R1
330 Ω, 1/16 W Chip Resistor
RC0402JR--07331RL
Yageo
R2
1.5 kΩ, 1/16 W Chip Resistor
RC0402JR--07152RL
Yageo
R3
Component Not Placed
PCB
0.014″, εr = 3.7
FR408
Isola
Note: Component numbers C6, C7, C8, C9 and R3 are labeled on board but not placed.
MMZ09312BT1
RF Device Data
Freescale Semiconductor, Inc.
11
VCC2
VCC1
VBIAS(1)
C1
C2
R3*
C3
L4
R2
C9*
R1
RFIN
L3
C8*
RFOUT
C6*
C10
C5
L5
L1
L2
C11
C7*
C4
QFN 3x3--12M
Rev. 1
PDET
(1) VBIAS [Board] supplies VBA1, VBA2 and VBIAS [Device].
Note: Component numbers C6*, C7*, C8*, C9* and R3* are labeled on board but not placed.
Figure 22. MMZ09312B Test Circuit Component Layout — 450 MHz, 5 Volt Operation
Table 9. MMZ09312B Test Circuit Component Designations and Values — 450 MHz, 5 Volt Operation
Part
Description
Part Number
Manufacturer
C1, C2
1 μF Chip Capacitors
GRM155R61A105KE15
Murata
C3
4.7 μF Chip Capacitor
GRM188R60J475KE19
Murata
C4
470 pF Chip Capacitor
GRM1555C1H471JA01
Murata
C5
100 pF Chip Capacitor
GRM1555C1H101JA01
Murata
C6, C7, C8, C9
Components Not Placed
C10
3.9 pF Chip Capacitor
04023J3R9BBSTR
AVX
C11
10 pF Chip Capacitor
04023J10R0BBSTR
AVX
L1
18 nH Chip Inductor
LL1608--FSL18N0S
TOKO
L2
1.2 nH Chip Inductor
LL1608--FSL1N2S
TOKO
L3
3.9 nH Chip Inductor
LL1608--FSL3N9S
TOKO
L4
12 nH Chip Inductor
LL1608--FSL12N0S
TOKO
L5
12 nH Chip Inductor
0603CS--12NXJL
Coilcraft
R1
330 Ω, 1/16 W Chip Resistor
RC0402JR--07331RL
Yageo
R2
1.5 kΩ, 1/16 W Chip Resistor
RC0402JR--07152RL
Yageo
R3
Component Not Placed
PCB
0.014″, εr = 3.7
FR408
Isola
(Test Circuit Component Designations and Values table repeated for reference.)
MMZ09312BT1
12
RF Device Data
Freescale Semiconductor, Inc.
--5
40
--10
35
--15
30
--20
25
S21 (dB)
S11 (dB)
TYPICAL CHARACTERISTICS — 450 MHz, 5 VOLT OPERATION
--25
--30
15
--35
--40
400
20
10
VCC1 = VCC2 = VBIAS = 5 Vdc
460
520
580
640
700
5
400
VCC1 = VCC2 = VBIAS = 5 Vdc
460
520
580
640
f, FREQUENCY (MHz)
f, FREQUENCY (MHz)
Figure 23. S11 versus Frequency
Figure 24. S21 versus Frequency
700
0
--5
S22 (dB)
--10
--15
--20
--25
--30
--35
400
VCC1 = VCC2 = VBIAS = 5 Vdc
460
520
580
640
700
f, FREQUENCY (MHz)
Figure 25. S22 versus Frequency
MMZ09312BT1
RF Device Data
Freescale Semiconductor, Inc.
13
50
45
Gain
Gps, POWER GAIN (dB)
34
40
35
32
VCC1 = VCC2 = VBIAS = 5 Vdc
f = 450 MHz
30
28
30
25
26
20
24
15
PAE
22
10
20
5
18
0
29
15
17
19
21
23
25
27
P1dB, 1 dB COMPRESSION POINT, CW (dBm)
38
36
PAE, POWER ADDED EFFICIENCY (%)
TYPICAL CHARACTERISTICS — 450 MHz, 5 VOLT OPERATION
32
30
28
26
24
22
20
VCC1 = VCC2 = VBIAS = 5 Vdc
18
400
440
480
520
560
600
Pout, OUTPUT POWER (dBm)
f, FREQUENCY (MHz)
Figure 26. Power Gain versus Power Added
Efficiency versus Output Power, CW
Figure 27. P1dB versus Frequency, CW
640
4
PDET, POWER DETECTOR (V)
3.6
3.2
VCC1 = VCC2 = VBIAS = 5 Vdc
f = 450 MHz
2.8
2.4
2
1.6
1.2
0.8
0.4
0
15
17
19
21
23
25
27
29
Pout, OUTPUT POWER (dBm)
Figure 28. Power Detector versus Output Power, CW
MMZ09312BT1
14
RF Device Data
Freescale Semiconductor, Inc.
3.00
0.70
0.30
2.00
3.40
0.50
1.6 x 1.6 Solder Pad
with Thermal Via
Structure
Figure 29. PCB Pad Layout for QFN 3x3
MA03
YWZ
Figure 30. Product Marking
MMZ09312BT1
RF Device Data
Freescale Semiconductor, Inc.
15
PACKAGE DIMENSIONS
MMZ09312BT1
16
RF Device Data
Freescale Semiconductor, Inc.
MMZ09312BT1
RF Device Data
Freescale Semiconductor, Inc.
17
MMZ09312BT1
18
RF Device Data
Freescale Semiconductor, Inc.
PRODUCT DOCUMENTATION, SOFTWARE AND TOOLS
Refer to the following documents, software and tools to aid your design process.
Application Notes
• AN1955: Thermal Measurement Methodology of RF Power Amplifiers
Software
• .s2p File
Development Tools
• Printed Circuit Boards
For Software and Tools, do a Part Number search at http://www.freescale.com, and select the “Part Number” link. Go to the
Software & Tools tab on the part’s Product Summary page to download the respective tool.
REVISION HISTORY
The following table summarizes revisions to this document.
Revision
Date
Description
0
Nov. 2011
• Initial Release of Data Sheet
1
Feb. 2012
• Typical Performance table: changed Pout at 750 MHz from 19.5 to 17.5 dBm to reflect recent performance
measurements, p. 1
• Figs. 3, 12 and 21, MMZ09312B Test Circuit Schematic: corrected L1 inductor label in test circuit
schematics, p. 3, 7 and 11
MMZ09312BT1
RF Device Data
Freescale Semiconductor, Inc.
19
How to Reach Us:
Home Page:
www.freescale.com
Web Support:
http://www.freescale.com/support
USA/Europe or Locations Not Listed:
Freescale Semiconductor, Inc.
Technical Information Center, EL516
2100 East Elliot Road
Tempe, Arizona 85284
1--800--521--6274 or +1--480--768--2130
www.freescale.com/support
Europe, Middle East, and Africa:
Freescale Halbleiter Deutschland GmbH
Technical Information Center
Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English)
+46 8 52200080 (English)
+49 89 92103 559 (German)
+33 1 69 35 48 48 (French)
www.freescale.com/support
Japan:
Freescale Semiconductor Japan Ltd.
Headquarters
ARCO Tower 15F
1--8--1, Shimo--Meguro, Meguro--ku,
Tokyo 153--0064
Japan
0120 191014 or +81 3 5437 9125
[email protected]
Asia/Pacific:
Freescale Semiconductor China Ltd.
Exchange Building 23F
No. 118 Jianguo Road
Chaoyang District
Beijing 100022
China
+86 10 5879 8000
[email protected]
For Literature Requests Only:
Freescale Semiconductor Literature Distribution Center
1--800--441--2447 or +1--303--675--2140
Fax: +1--303--675--2150
[email protected]
Information in this document is provided solely to enable system and software
implementers to use Freescale Semiconductor products. There are no express or
implied copyright licenses granted hereunder to design or fabricate any integrated
circuits or integrated circuits based on the information in this document.
Freescale Semiconductor reserves the right to make changes without further notice to
any products herein. Freescale Semiconductor makes no warranty, representation or
guarantee regarding the suitability of its products for any particular purpose, nor does
Freescale Semiconductor assume any liability arising out of the application or use of
any product or circuit, and specifically disclaims any and all liability, including without
limitation consequential or incidental damages. “Typical” parameters that may be
provided in Freescale Semiconductor data sheets and/or specifications can and do
vary in different applications and actual performance may vary over time. All operating
parameters, including “Typicals”, must be validated for each customer application by
customer’s technical experts. Freescale Semiconductor does not convey any license
under its patent rights nor the rights of others. Freescale Semiconductor products are
not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life,
or for any other application in which the failure of the Freescale Semiconductor product
could create a situation where personal injury or death may occur. Should Buyer
purchase or use Freescale Semiconductor products for any such unintended or
unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all
claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that Freescale
Semiconductor was negligent regarding the design or manufacture of the part.
Freescalet and the Freescale logo are trademarks of Freescale Semiconductor, Inc.
All other product or service names are the property of their respective owners.
© Freescale Semiconductor, Inc. 2011--2012. All rights reserved.
MMZ09312BT1
Document Number: MMZ09312B
Rev. 1, 2/2012
20
RF Device Data
Freescale Semiconductor, Inc.
Similar pages