Minmax ABF-04S09 Ac/dc power module 4w ultra-compact dimension Datasheet

ABF-04 SERIES
AC/DC Power Module 4W
FEATURES
►Ultra-compact Dimensions:
36.5x27x17.1 mm (1.44x1.06x0.67”)
►Fully encapsulated Module with
Solder Pins for PCB Mounting
►Universal Input 85-264 VAC, 47-440 Hz
►Eco Design, compliant to Energy Star specification and ErP
Directive 2009/125/EC
►Single- and Dual Output Models
►Protection Class ll
►Safety Approval to cUL/UL/IEC/EN 60950-1
►Over Load and Over Voltage Protection
►3 Year Product Warranty
PRODUCT OVERVIEW
The MINMAX ABF-04 series is a new range of fully encapsulated AC/DC power supply modules. They are designed for direct PCB mounting with solder
pins. The product features EMI-filter to EN55022, class B and EMS compliance to the EN 61000-4 standard.
Universal input voltage 85-264VAC and International safety approvals qualifies these power modules for applications in products with worldwide markets.
The ABF-04 series provide a cost effective solution for many space critical applications in commercial and industrial electronic equipment.
Model Selection Guide
Model
Output
Number
Voltage
Output Current
ABF-04D53
ABF-04D125
ABF-04D12
ABF-04D15
Max. capacitive
Efficiency
Load
VDC
3.3
5
9
12
15
24
+5
+3.3
+12
+5
±12
±15
ABF-04S03
ABF-04S05
ABF-04S09
ABF-04S12
ABF-04S15
ABF-04S24
Input Current
Max.
@Max. Load
mA
1200
800
444
333
267
167
600
150
250
120
±166
±133
mA(typ.)
82
82
77
76
76
76
72
72
76
76
(typ.)
@Max. Load
μF
1200
800
440
330
260
160
5600
4700
330
4700
# 330
# 260
# For each output
%
70
72
75
76
76
77
72
75
77
77
Input Specifications
Parameter
Model
Min.
Typ.
Max.
Unit
85
---
264
VAC
47
---
440
Hz
120
---
370
VDC
---
---
0.3
W
115VAC
---
---
15
A
230VAC
---
---
25
A
Input Voltage Range
Input Frequency Range
All Models
Input Voltage Range
No-Load Power Consumption
Inrush Current (Cold Start at 25℃)
E-mail:[email protected]
2012/06/01 REV:8
Tel:886-6-2923150
Page 1 of 3
ABF-04 SERIES
AC/DC POWER MODULE 4W
Output Specifications
Parameter
Output Voltage Accuracy
Line Regulation
Conditions
Min.
Typ.
Max.
Unit
Single and Dual Output Models
ABF-04D53 & ABF-04D125
Single and Dual Output Models
----------------------No min. Load
required
---------
±1.0
±2.0
±0.5
±0.5
±1.0
±1.0
±0.5
±0.5
±2.5
100
0.8
±2.0
±5.0
±1.0
±1.0
±3.0
±1.5
±1.0
±1.0
±5.0
150
1.0
%
%
%
%
%
%
%
%
%
mV P-P
%VPP of Vo
---
---
%Inom.
25
120
±0.01
---
----±0.02
5
%Inom.
% of Vo
%/℃
%Vout
---
%Inom.
Vo1
Vo2
ABF-04D53 & ABF-04D125
3.3VDC Output Model
5~24VDC and Dual Output Models
Vo1
ABF-04D53 & ABF-04D125
Vo2
3.3V & 5VDC Output Models
Other Output Models
Load Regulation
Ripple & Noise (20MHz)
Single Output and Dual +/- Output Models
Minimum Load
Dual +/+ Output Models
Zener diode clamp
Over Voltage Protection
Temperature Coefficient
Overshoot
Foldback, auto-recovery
105
--(long term overload condition may cause damage)
Hiccup mode, indefinite (automatic recovery)
Current Limitation
Short Circuit Protection
General Specifications
Parameter
I/O Isolation Voltage
I/O Isolation Resistance
Switching Frequency
Hold-up Time
MTBF (calculated)
EMC Emission
Conditions
Input to Output, 60 Seconds
500 VDC
MIL-HDBK-217F@25℃, Ground Benign
Conducted and radiated
Standard
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EMC Immunity according
EN61000-6-1
EN61000-4-6
EN61000-4-8
EN61000-4-11
Protection Class II
Safety Approvals
Min.
Typ.
Max.
Unit
3000
----VAC
100
----MΩ
--130
--KHz
--20
--ms
330,000
----Hours
EN 55011 class B, EN 55022 class B, FCC part 15 class B
Specification Requirement
Performance Criteria
Air ±8KV Cont. ±4KV
B
80~1000MHz, 10V/m 80% AM, 1KHz modulation
A
AC port ±2KV DC, SL, TL ±2KV not less than 1 min.
B
1.2/50μS(8/20μS) AC dif. ±1KV DC ±0.5KV
B
0.15~80MHz, 10Vrms (functional earth ports included)
B
80% AM, 1KHz modulation
50Hz/60Hz, 30A/m
A
30%, 10ms
B
60%, 100ms, 95%, 5000ms
C
According IEC/EN 60536
cUL/UL 60950-1,IEC/EN 60950-1
Input Fuse
All Models
External Fuse (Recommended)
1A Slow – Blow Type
Environmental Specifications
Parameter
Temperature Range (operational)
Power Derating
Storage Temperature Range
Over Temperature Protection
Cooling
Humidity (non condensing)
E-mail:[email protected]
2012/06/01 REV:8
Ambient
+50℃ to +60℃
Conditions
-25℃
-40℃
at 90℃ (automatic recovery at 67℃)
Free-Air convection
---
Tel:886-6-2923150
Page 2 of 3
+60℃
0.3W / ℃
+85℃
95 % rel. H
ABF-04 SERIES
AC/DC POWER MODULE 4W
Notes
1
All specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage and after warm-up time rated output current unless otherwise noted.
2
Ripple & Noise measurement bandwidth is 0~20 MHz
3
These power modules require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage the power
4
All AC/DC modules should be externally fused at the front end for protection.
5
Other input and output voltage may be available, please contact factory
6
Specifications subject to change without notice
supplies however they may not meet all listed specifications.
Package Specifications
Mechanical Dimensions
Pin Connections
2x3.75
[2x0.15]
Pin
D12/D15
D53/D125
NC
2
NC
+Vout
+Vout
+Vout1
4
4
-Vout
Common
Common
5
5
NP
-Vout
+Vout2
Bottom View
0.60 [0.02]
3
36.5 [1.44]
3
14.00 [0.55]
25.25 [0.99]
2
Single Output
1
6
AC(N)
7
AC(L)
7.50
[0.30]
6
7.50
[0.30]
1
21.00 [0.83]
27.0 [1.06]
►All
3.75
[0.15]
3.00
[0.12]
7
4.0
[0.16]
17.1
[0.67]
dimensions in mm (inches)
►Tolerance: ±0.5
►Pin
(±0.01)
diameter  0.6 ±0.1 (0.02±0.004)
Physical Characteristics
Case Size
:
Case Material
:
36.5x27.0x17.1mm (1.44x1.06x0.67 inches)
Plastic resin + Fiberglass (flammability to UL 94V-0 rated)
Weight
:
26g
Minmax Technology Co., Ltd.
18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan
Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected]
2012/06/01 REV:8
Page 3 of 3
Similar pages