STMicroelectronics ESDA6V1-5P6 Transil array for esd protection Datasheet

ESDAxxxP6
ASD
Transil™ array for ESD protection
Main applications
Where transient overvoltage protection in ESD
sensitive equipment is required, such as:
■
■
■
■
■
Computers
Servers
Printers
Communication systems and cellular phones
Video equipment
These devices are particularly adapted to the
protection of symmetrical signals.
SOT-666IP
(Internal pad)
ESDA6V1P6
ESDA6V1-5P6
Order codes
Features
■
4 / 5 Unidirectional
(ESDA6V1P6 and ESDA6V1-5P6) and
Bidirectional (ESDA14V2BP6 and
ESDA25-4BP6) Transil functions
■
Breakdown voltage:
VBR = 6.1 V min., 14.2 V min. and 25 V min.
■
Low leakage current:
< 500 nA (ESDA6V1P6 / ESDA6V1-5P6)
< 1 µA (ESDA14V2BP6 and ESDA25-4BP6)
■
Part Number
Marking
ESDA6V1P6
B
ESDA6V1-5P6
C
ESDA14V2BP6
A
ESDA25-4BP6
V
Figure 1.
ESDA6V1P6 functional diagram
I/O1
Very small PCB area < 2.6 mm2
Description
SOT-666
ESDA14V2BP6
ESDA25-4BP6
Figure 2.
The ESDAxxxP6 are monolithic arrays designed
to protect up to 5 lines against ESD transients.
These devices are ideal where board space
saving and reduced line capacitance are required.
I/O4
GND
GND
I/O2
I/O3
ESDA6V1-5P6 functional diagram
I/O1
I/O5
GND
I/O4
I/O2
I/O3
Benefits
■
High ESD protection level
■
High integration
■
Suitable for high density boards
Figure 3.
I/O1
Complies with the following standards:
IEC61000-4-2 level 4:
15 kV (air discharge)
8 kV (contact discharge)
MIL STD 883E-Method 3015-7: class3
ESDA14V2BP6 and ESDA25-4BP6
functional diagram
I/O4
GND
GND
I/O2
I/O3
TM: Transil is a trademark of STMicroelectronics
25 kV (Human Body Model)
May 2007
Rev 3
1/8
www.st.com
8
Characteristics
1
ESDAxxxP6
Characteristics
Table 1.
Absolute Maximum Ratings (Tamb = 25° C)
Symbol
Parameter
VPP
IEC 61000-4-2 level 4 standard
PPP
Peak pulse power (8/20 µs) (1)
Tj initial = Tamb
Tj
Tstg
Value
Unit
air discharge
contact discharge
±15
±8
kV
ESDA6V1P6 / ESDA6V1-5P6
150
ESDA14V2BP6 / ESDA25-4BP6
50
W
Junction temperature
Storage temperature range
TL
Maximum lead temperature for soldering during 10 s at 5 mm for case
Top
Operating temperature range
150
°C
-55 to +150
°C
260
°C
-40 to +150
°C
1. for a surge greater than the maximum values, the diode will fail in short-circuit.
Table 2.
Electrical Characteristics (Tamb = 25° C)
Symbol
Parameter
Unidirectional
I
IF
VRM
Stand-off voltage
VBR
Breakdown voltage
VCL
Clamping voltage
IRM
VF
VCL VBR
VRM
V
IRM
Bidirectional
Leakage current
I
Slope: 1/Rd
IPP
Peak pulse current
αT
Voltage temperature coefficient
VF
Forward voltage drop
C
Capacitance
Rd
Dynamic resistance
IPP
VCL VBR
VRM
Slope: 1/Rd
VBR
IRM
@
VRM
@ IR
Part Numbers
min.
V
IRM
max.
IPP
Rd
αT
C
max.
typ.
typ.
max.
@ 0V
V
V
mA
µA
V
Ω
10-4/°C
pF
6.1
7.2
1
0.5
3
1.5
4
70
1
12
14.2
18
1
1.5
5.8
25
0.1
3
1
24
1.7
7.3
22
ESDA6V1P6
ESDA6V1-5P6
ESDA14V2BP6
ESDA25-4BP6
2/8
25
30
1
ESDAxxxP6
Characteristics
Figure 4.
Peak power dissipation versus
initial junction temperature
Figure 5.
Peak pulse power versus
exponential pulse duration
(Tj initial = 25° C)
PPP(W)
PPP[Tj initial] / PPP[Tj initial=25°C]
1.1
1000
Tj initial = 25°C
1.0
0.9
ESDA6V1P6 & ESDA6V1-5P6
0.8
0.7
0.6
100
0.5
ESDA14V2BP6 & ESDA25-4BP6
0.4
0.3
0.2
Tj initial (°C)
0.1
tp(µs)
10
0.0
0
25
Figure 6.
50
75
100
125
150
1
175
Clamping voltage versus peak
pulse current (Tj initial = 25° C,
rectangular waveform, tp = 2.5 µs)
IPP(A)
10
Figure 7.
100
Junction capacitance versus
reverse applied voltage (typical
values)
C(pF)
100.0
80
F=1MHz
VOSC=30mVRMS
Tj=25°C
70
ESDA14V2BP6
ESDA6V1P6 & ESDA6V1-5P6
60
ESDA6V1P6 & ESDA6V1-5P6
10.0
50
ESDA25-4BP6
40
30
1.0
ESDA14V2BP6
20
tP=2.5µs
Tj initial =25°C
VCL(V)
10
VR(V)
0
0.1
0
Figure 8.
10
20
30
40
50
60
70
Relative variation of leakage
current versus junction
temperature (typical values)
0
1
2
Figure 9.
3
4
5
ESDA25-4BP6
6
7
8
9
10
11
12
13
14
Peak forward voltage drop versus
peak forward current (typical
values)
IFM(A)
IR[Tj] / IR[Tj=25°C]
1.E+00
1.E+04
ESDA6V1P6 & ESDA6V1-5P6
ESDA14V2BP6
VRM =12 V
1.E+03
1.E-01
Tj =125°C
1.E+02
Tj =25°C
ESDA25-4BP6
VRM = 24 V
1.E-02
1.E+01
Tj(°C)
ESDA6V1P6 & ESDA6V1-5P6
VRM =3 V
VFM(V)
1.E+00
1.E-03
25
50
75
100
125
150
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
3/8
Ordering information scheme
Figure 10. ESD response @ VPP = 15 kV air
discharge (ESDA6V1-5P6)
ESDAxxxP6
Figure 11. ESD response @ VPP = 15 kV air
discharge (ESDA25-4BP6)
20 V per div
0.2 µs per div
2
Ordering information scheme
ESDA
6V1 - x B Px
ESD Array
Breakdown Voltage
6V1 = 6.1 Volts min.
14V2 = 14.2 Volts min.
25 = 25 Volts min.
Number of lines protected (optional)
5 = 5 lines
4 = 4 lines
Type
Blank = Unidirectional
B = Bidirectional
Packages
P6 = SOT-666 for ESDA14V2BP6 and ESDA25-4BP6
SOT-666IP for ESDA6V1P6 and ESDA6V1-5P6
4/8
ESDAxxxP6
3
Package information
Package information
●
Epoxy meets UL94, V0
Table 3.
SOT-666 Dimensions
Dimensions
b1
Ref.
Millimeters
Inches
L1
Min.
L3
Typ.
Max.
Min.
Typ.
Max.
A
0.45
0.60 0.018
0.024
A3
0.08
0.18 0.003
0.007
b
0.17
0.34 0.007
0.013
b1
0.19
D
1.50
1.70 0.059
0.067
E
1.50
1.70 0.059
0.067
E1
1.10
1.30 0.043
0.051
b
D
E1
0.27
0.34 0.007 0.011 0.013
A
L2
E
A3
e
0.50
0.020
L1
0.19
0.007
L2
0.10
0.30 0.004
0.012
e
L3
0.10
0.004
Figure 12. SOT-666 Footprint (dimensions in mm)
0.50
0.62
2.60
0.99
0.30
5/8
Package information
ESDAxxxP6
Table 4.
SOT-666IP Dimensions
Dimensions
Ref.
b1
L1
Millimeters
Min.
Typ.
Max.
Inches
Min.
Typ.
Max.
L4
L3
b
D
E1
A
L2
E
A3
A
0.45
0.60 0.018
0.024
A3
0.08
0.18 0.003
0.007
b
0.17
0.34 0.007
0.013
b1
0.19
D
1.50
1.70 0.059
0.067
E
1.50
1.70 0.059
0.067
E1
1.10
1.30 0.043
0.051
0.34 0.007 0.011 0.013
e
0.50
0.020
L1
0.19
0.007
L2
e
0.27
0.10
0.30 0.004
0.012
L3
0.10
0.004
L4
0.60
0.024
Figure 13. SOT-666IP Footprint (dimensions in mm)
0.50
0.30
0.99
0.21
0.62
2.60
1.40
0.20
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a lead-free second level interconnect. The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com.
6/8
ESDAxxxP6
4
Ordering information
Ordering information
Part Number
Marking
ESDA6V1P6
B
ESDA6V1-5P6
C
ESDA14V2BP6
A
ESDA25-4BP6
V
Package
Weight
Base qty
Delivery mode
2.9 mg
3000
Tape and reel
SOT-666IP
5
SOT-666
Revision history
Date
Revision
Changes
07-Feb-2006
1
ESDA6V1P6, ESDA6V1-5P6 and ESDA14V2BP6: datasheets
merged. ECOPACK statement added. Some curves combined.
26-Jun-2006
2
Reformatted to current standards. Modified package information to
show both SOT-666 and SOT-666IP.
22-May-2007
3
Added product ESDA25-4BP6
7/8
ESDAxxxP6
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
8/8
Similar pages