IDT IDT74ALVC1G00 3.3v cmos single 2-input positive-nand gate Datasheet

IDT74ALVC1G00
3.3V CMOS SINGLE 2-INPUT POSITIVE-NAND GATE
EXTENDED COMMERCIAL TEMPERATURE RANGE
IDT74ALVC1G00
3.3V CMOS
SINGLE 2-INPUT
POSITIVE-NAND
GATE
FEATURES:
DESCRIPTION:
This single 2-input positive-NAND gate is built using advanced dual
metal CMOS technology. The ALVC1G00 is designed for 1.65V to
3.6V VCC operation and performs the Boolean function Y = A • B or Y
= A + B in positive logic.
–
–
0.5 MICRON CMOS Technology
ESD > 2000V per MIL-STD-883, Method 3015;
> 200V using machine model (C = 200pF, R = 0)
– 0.65mm pitch PSOP package
– Extended commercial range of – 40°C to + 85°C
– VCC = 3.3V ± 0.3V, Normal Range
– VCC = 1.65V to 3.6V, Extended Range
– VCC = 2.5V ± 0.2V
– CMOS power levels (0.4µ W typ. static)
– Rail-to-Rail output swing for increased noise margin
Drive Features for ALVC1G00:
– High Output Drivers: ±24mA
– Suitable for heavy loads
The ALVC1G00 has been designed with a ±24mA output driver.
This driver is capable of driving a moderate to heavy load while
maintaining speed performance.
APPLICATIONS:
• 3.3V High Speed Systems
• 3.3V and lower voltage computing systems
FUNCTIONAL BLOCK DIAGRAM
A
1
4
B
PIN CONFIGURATION
Y
A
1
B
2
GND
3
5
V CC
4
Y
2
SO5-1
PSOP
TOP VIEW
FUNCTION TABLE (1)
PIN DESCRIPTION
Pin Names
A, B
Y
Data Inputs
A
Inputs
B
Output
Y
Data Output
H
H
L
L
X
H
X
L
H
Description
NOTE:
1. H = HIGH Voltage Level
L = LOW Voltage Level
X = Don’t Care
EXTENDED COMMERCIAL TEMPERATURE RANGE
FEBRUARY 2000
1
c
1999 Integrated Device Technology, Inc.
DSC-4739/-
IDT74ALVC1G00
3.3V CMOS SINGLE 2-INPUT POSITIVE-NAND GATE
(1)
ABSOLUTE MAXIMUM RATING
Symbol
VTERM(2)
EXTENDED COMMERCIAL TEMPERATURE RANGE
CAPACITANCE (TA = +25oC, f = 1.0MHz)
Max.
– 0.5 to + 4.6
Unit
V
–0.5 to
VCC + 0.5
– 65 to + 150
V
TSTG
Description
Terminal Voltage
with Respect to GND
Terminal Voltage
with Respect to GND
Storage Temperature
°C
IOUT
DC Output Current
– 50 to + 50
mA
IIK
± 50
mA
IOK
Continuous Clamp Current,
VI < 0 or VI > VCC
Continuous Clamp Current, VO < 0
– 50
mA
ICC
ISS
Continuous Current through
each VCC or GND
±100
mA
VTERM(3)
Symbol
CIN
Parameter(1)
Input Capacitance
Conditions
VIN = 0V
Typ.
5
Max.
7
Unit
pF
COUT
Output
Capacitance
I/O Port
Capacitance
VOUT = 0V
7
9
pF
VIN = 0V
7
9
pF
CI/O
ALVC 1G Link
NOTE:
1. As applicable to the device type.
ALVC 1G Link
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM
RATINGS may cause permanent damage to the device. This is a
stress rating only and functional operation of the device at these or
any other conditions above those indicated in the operational sections
of this specification is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect reliability.
2. VCC terminals.
3. All terminals except VCC.
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE
Following Conditions Apply Unless Otherwise Specified:
Operating Condition: TA = – 40°C to +85°C, VCC = 2.3V to 3.6V
Symbol
VIH
VIL
Parameter
Input HIGH Voltage Level
Input LOW Voltage Level
Min.
0.65 x VCC
Typ.(1)
—
Max.
—
VCC = 2.3V to 2.7V
1.7
—
—
VCC = 2.7V to 3.6V
2
—
—
VCC = 1.65V to 1.95V
—
—
VCC = 2.3V to 2.7V
—
—
0.7
VCC = 2.7V to 3.6V
—
—
0.8
±5
VCC
Test Conditions
= 1.65V to 1.95V
0.35 x VCC
Unit
V
V
IIH
Input HIGH Current
VCC = 3.6V
VI = VCC
—
—
µA
IIL
Input LOW Current
VCC = 3.6V
VI = GND
—
—
±5
IOZH
High Impedance Output Current
VCC = 3.6V
VO = VCC
—
—
± 10
µA
IOZL
(3-State Output pins)
VO = GND
—
—
± 10
µA
VIK
Clamp Diode Voltage
VCC = 2.3V, IIN = – 18mA
—
– 0.7
– 1.2
V
VH
Input Hysteresis
VCC = 3.3V
—
100
—
mV
ICCL
ICCH
ICCZ
∆ICC
Quiescent Power Supply Current
VCC = 3.6V
VIN = GND or VCC
—
0.1
10
µA
Quiescent Power Supply
Current Variation
One input at VCC − 0.6V,
other inputs at VCC or GND
—
—
750
µA
ALVC 1G Link
NOTE:
1. Typical values are at VCC = 3.3V, +25°C ambient.
2
IDT74ALVC1G00
3.3V CMOS SINGLE 2-INPUT POSITIVE-NAND GATE
EXTENDED COMMERCIAL TEMPERATURE RANGE
OUTPUT DRIVE CHARACTERISTICS
Symbol
VOH
Parameter
Output HIGH Voltage
VCC
Test Conditions(1)
= 1.65V to 3.6V
IOH = – 0.1mA
Min.
VCC – 0.2
VCC = 1.65V
IOH = – 4mA
1.2
VCC = 2.3V
IOH = – 6mA
2
—
VCC = 2.3V
IOH = – 12mA
1.7
—
2.2
—
VCC = 2.7V
VCC = 3.0V
VOL
Output LOW Voltage
Max.
—
2.4
—
VCC = 3.0V
IOH = – 24mA
2
—
VCC = 1.65V to 3.6V
IOL = 0.1mA
—
0.2
VCC = 1.65V
IOL = 4mA
VCC = 2.3V
IOL = 6mA
—
0.4
IOL = 12mA
—
0.7
VCC = 2.7V
IOL = 12mA
—
0.4
VCC = 3.0V
IOL = 24mA
—
0.55
Unit
V
V
0.45
ALVC 1G Link
NOTE:
1. VIH and VIL must be within the min. or max. range shown in the DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE table for the
appropriate VCC range. TA = – 40°C to + 85°C.
OPERATING CHARACTERISTICS, TA = 25oC
Symbol
CPD
Parameter
Power Dissipation Capacitance
VCC = 1.8V ± 0.15V
VCC = 2.5V ± 0.2V
VCC = 3.3V ± 0.3V
Typical
Typical
5
Typical
6
Test Conditions
CL = 0pF, f = 10Mhz
Unit
pF
SWITCHING CHARACTERISTICS(1)
VCC = 1.8V ± 0.15V
Symbol
tPLH
tPHL
Parameter
Propagation Delay
A or B to Y
Min.
1
VCC = 2.5V ± 0.2V
Max.
8
Min.
1
NOTE:
1. See test circuits and waveforms. TA = – 40°C to + 85°C.
3
Max.
3.8
VCC = 2.7V
Min.
Max.
3.6
VCC = 3.3V ± 0.3V
Min.
1
Max.
3.2
Unit
ns
IDT74ALVC1G00
3.3V CMOS SINGLE 2-INPUT POSITIVE-NAND GATE
EXTENDED COMMERCIAL TEMPERATURE RANGE
TEST CIRCUITS AND WAVEFORMS:
TEST CONDITIONS
PROPAGATION DELAY
Symbol
VLOAD
VCC(1)= 3.3V ± 0.3V
VCC(1) = 2.7V
6
6
VIH
2.7
2.7
Vcc
V
VT
1.5
1.5
Vcc / 2
V
VLZ
300
300
150
mV
VHZ
300
300
150
mV
CL
50
VCC(2)= 2.5V ± 0.2V Unit
2 x Vcc
V
50
30
SAME PHASE
INPUT TRANSITION
tPLH
tPHL
tPLH
tPHL
OUTPUT
V IH
VT
0V
V OH
VT
V OL
V IH
VT
0V
pF OPPOSITE PHASE
ALVC 1G Link INPUT TRANSITION
ALVC 1G Link
ENABLE AND DISABLE TIMES
TEST CIRCUITS FOR ALL OUTPUTS
V LOAD
V CC
500 Ω
(1, 2)
V IN
CONTROL
INPUT
GND
tPZL
V OUT
Pulse
Generator
OUTPUT
SW ITCH
NORMALLY
CLO SED
LOW
tPZH
OUTPUT
SW ITCH
NORMALLY
OPE N
HIGH
D.U.T.
500 Ω
RT
CL
ALVC 1G Link
DEFINITIONS:
CL= Load capacitance: includes jig and probe capacitance.
RT = Termination resistance: should be equal to ZOUT of the Pulse
Generator.
NOTES:
1. Pulse Generator for All Pulses: Rate ≤ 10MHz; tF ≤ 2.5ns; tR ≤ 2.5ns.
2. Pulse Generator for All Pulses: Rate ≤ 10MHz; tF ≤ 2ns; tR ≤ 2ns.
tPLZ
0V
V LOAD/2
V LOAD/2
VT
V LZ
V OL
tPHZ
V OH
V HZ
VT
0V
0V
NOTE:
1. Diagram shown for input Control Enable-LOW and input Control
Disable-HIGH.
SET-UP, HOLD, AND RELEASE TIMES
Switch
VLOAD
DATA
INPUT
tSU
tH
TIMING
INPUT
GND
tREM
Open
ASYNCHRONOUS
CONTROL
ALVC 1G Link
SYNCHRONOUS
CONTROL
tSU
tH
V IH
VT
0V
V IH
VT
0V
V IH
VT
0V
V IH
VT
0V
ALVC 1G Link
PULSE WIDTH
LOW -HIGH-LOW
PULSE
VT
tW
HIGH-LOW -HIGH
PULSE
V IH
VT
ALVC 1G Link
SWITCH POSITION
Test
Open Drain
Disable Low
Enable Low
Disable High
Enable High
All Other tests
DISABLE
ENABLE
Open
VT
ALVC 1G Link
4
IDT74ALVC1G00
3.3V CMOS SINGLE 2-INPUT POSITIVE-NAND GATE
EXTENDED COMMERCIAL TEMPERATURE RANGE
1.8V ± 0.15V TEST CIRCUITS AND WAVEFORMS:
TEST CONDITIONS
PROPAGATION DELAY
Symbol
VLOAD
VCC(1)= 1.8V ± 0.15V
2 x VCC
Unit
V
VIH
VCC
V
VT
VCC / 2
V
VLZ
150
mV
VHZ
150
mV
CL
30
SA M E PHA SE
INPU T TRA NSITIO N
t PLH
t PHL
t PLH
t PHL
O UTPUT
V OH
VT
VOL
V IH
VT
0V
O PPO SITE PHA SE
INPU T TRA NSITIO N
pF
V IH
VT
0V
ALVC 1G Link
ALVC 1G Link
TEST CIRCUITS FOR ALL OUTPUTS
ENABLE AND DISABLE TIMES
V LOAD
V CC
1000 Ω
(1)
V IN
CO NTRO L
INPU T
G ND
t PZL
O UTPUT
SW ITCH
NO RMA LLY
CLO SED
LO W
t PZH
O UTPUT
SW ITCH
NO RMA LLY
OPEN
HIG H
D.U.T.
RT
CL
1000 Ω
DEFINITIONS:
ALVC 1G Link
CL= Load capacitance: includes jig and probe capacitance.
RT = Termination resistance: should be equal to ZOUT of the Pulse
Generator.
NOTE:
1. Pulse Generator for All Pulses: Rate ≤ 10MHz; tF ≤ 2ns; tR ≤ 2ns.
V IH
VT
V OUT
Pulse
G enerator
DISA BLE
ENA BLE
O pen
t PLZ
0V
V LOAD/2
V LOAD/2
VT
V LZ
V OL
t PHZ
V OH
V HZ
VT
0V
0V
ALVC 1G Link
NOTE:
1. Diagram shown for input Control Enable-LOW and input Control
Disable-HIGH.
SET-UP, HOLD, AND RELEASE TIMES
SWITCH POSITION
Test
Open Drain
Disable Low
Enable Low
Disable High
Enable High
All Other tests
Switch
VLOAD
SY NCHRO NOUS
CO NTRO L
V IH
VT
0V
t SU
tH
TIM ING
INPU T
GND
t REM
Open
ALVC 1G Link
PULSE WIDTH
t SU
tH
ALVC 1G Link
LO W -HIG H-LO W
PULSE
VT
tW
HIG H-LO W -HIGH
PULSE
AS YNCHRO NOUS
CO NTRO L
V IH
VT
0V
V IH
VT
0V
V IH
VT
0V
DATA
INPU T
VT
ALVC 1G Link
5
IDT74ALVC1G00
3.3V CMOS SINGLE 2-INPUT POSITIVE-NAND GATE
EXTENDED COMMERCIAL TEMPERATURE RANGE
ORDERING INFORMATION
IDT
XX
Temp. Range
ALVC
XXX
XX
Device Type
Package
DY
Plastic Small Outline Package (SO5-1)
1G00
Single 2-Input Positive-NAND Gate, ±24mA
– 40°C to +85°C
74
PICOGATE-LOGIC (DY) PACKAGES
Due to their small size, PicoGate-Logic packages require more complex symbolization guidelines. IDT’s 5-pin PSOP (DY) packaged devices
utilize a three-symbol name rule. The first symbol denotes device technology, the second symbol denotes device function, and the third symbol
denotes a wafer fab/assembly site code for internal tracking.
EXAMPLES:
1. A PicoGate-Logic device with package code LR* is an IDT74LVC1G79A.
2. A PicoGate-Logic device with package code GC* is an IDT74ALVC1G04.
PICOGATE-LOGIC (DY) PACKAGE SYMBOLIZATION GUIDELINES
TECHNOLOGY
ALVC
ALVCH
LVC
LVCH(1)
CODE
G
J
L
FUNCTION
00
02
04
U04
06
07
08
14
32
79
86
125
126
132
CODE
A
B
C
D
T
V
E
F
G
R
H
M
N
Y
NOTE:
1. Code to be determined.
CORPORATE HEADQUARTERS
2975 Stender Way
Santa Clara, CA 95054
for SALES:
800-345-7015 or 408-727-6116
fax: 408-492-8674
www.idt.com*
*To search for sales office near you, please click the sales button found on our home page or dial the 800# above and press 2.
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
6
Similar pages