EPCOS B41607A7158M002 Snap-in capacitors automotive up to 150 Datasheet

Snap-In Capacitors
B41607
Automotive – Up to 150 °C
B41607
Long-life grade capacitors
Applications
■ High-reliability equipment in automotive
power electronics, e.g. integrated starter alternator
■ Applications with highest ripple current load
at high frequencies
Features
■ Outstanding high reliability and long useful life
■ Outstanding ripple current capability optimized
for high frequencies
■ Can be operated at temperature up to 150 °C
■ Vibration resistance 20 g upon request
■ Overload protection (safety vent)
Construction
■ Charge-discharge proof, polar
■ Aluminum case, fully insulated
■ Snap-in solder pins to hold component
in place on PC-board
■ Minus pole marking on case surface
■ Minus pole not insulated from case
Terminals
■ 3 terminals: length 4,5 mm
(terminal arrangement ensures correct insertion)
274 10/02
B41607
Automotive – Up to 150 °C
Specifications and characteristics in brief
Rated voltage UR
25 … 63 VDC
Surge voltage US
1,15 · UR
Rated capacitance CR
800 … 3300 µF
Capacitance tolerance
Leakage current IL
± 20 %
M
(5 min, 20 °C)
C R U R 0,7
I L ≤ 0,006 µA ⋅ æè ------- ⋅ -------öø + 4 µA
µF V
Self-inductance ESL
15 nH
Useful life
40 °C; UR; 2,1 · I~R
85 °C; UR; 2,1 · I~R
125 °C; UR; I~R
150 °C; UR; 0,5 · I~R
Requirements:
> 500 000 h
> 30 000 h
> 10 000 h
> 1 000 h
Voltage endurance test
125 °C; UR
Vibration resistance
∆C/C
ESR
IL
≤ ± 30 % of initial value
≤ 3 times initial specified limit
≤ initial specified limit
Failure percentage: ≤ 0,5 %
Failure rate:
≤ 10 fit (≤ 10 · 10 –9/h)
(for definiton “fit”, refer to chapter “Quality”, page 62)
Post test requirements:
∆C/C
≤ ±10 % of initial value
ESR
≤ 1,3 times initial specified limit
IL
≤ initial specified limit
To IEC 60068-2-6, test Fc:
displacement amplitude 0,75 mm, frequency range 10 Hz to 2 kHz,
acceleration max. 10 g, duration 3 × 2 h
2000 h
Vibration resistance 20 g upon request
IEC climatic category
Detail specification
To IEC 60068-1:
55/125/56 (– 55 °C/+ 125 °C/56 days damp heat test)
Similar to CECC 30301-809
Sectional specification
IEC 60384-4
275 10/02
B41607
Automotive – Up to 150 °C
Dimensional drawing
Minus pole marking
Mounting holes
Dimensions (mm) Approx.
Packing units
weight (g) (pieces)
d+1
l±2
22
40
18
160
25
40
22
130
Packing of snap-in capacitors
For ecological reasons the packing is
pure cardboard. Components can be
withdrawn (in full or in part) in the correct
position for insertion.
276 10/02
B41607
Automotive – Up to 150 °C
Overview of available types
UR (VDC)
25
CR (µF)
Case dimensions d × l (mm)
40
55
63
22 × 40
800
1 100
1 500
22 × 40
22 × 40
25 × 40
25 × 40
2 000
2 500
22 × 40
3 300
25 × 40
277 10/02
25 × 40
B41607
Automotive – Up to 150 °C
Case dimensions and ordering codes
UR
CR
VDC
25
Ordering code
µF
Case dim.
d×l
mm
2 500
3 300
22 × 40
25 × 40
B41607A4258M002
B41607A4338M002
40
1 500
2 000
22 × 40
25 × 40
B41607A7158M002
B41607A7208M002
55
1 100
1 500
22 × 40
25 × 40
B41607A0118M002
B41607A0158M002
63
800
1 100
22 × 40
25 × 40
B41607A8807M002
B41607A8118M002
3 terminals
Technical data
CR
100 Hz
20 °C
µF
Case
dim.
d×l
mm
ESRtyp
100 Hz
20 °C
mΩ
ESRmax
100 Hz
20 °C
mΩ
ESRmax
100 Hz
– 40 °C
mΩ
ESRmax
10 kHz
20 °C
mΩ
Zmax
100 kHz
20 °C
mΩ
I~max
10 kHz
105 °C
A
I ~R
10 kHz
125 °C
A
I~max
10 kHz
150 °C
A
22 × 40
25 × 40
25
20
35
28
115
80
26
18
25
17
9,9
13,5
5,6
7,6
2,8
3,8
25 VDC
2 500
3 300
40 VDC
1 500
22 × 40
35
48
115
26
25
9,8
5,5
2,7
25 × 40
26
36
80
18
17
13,4
7,6
3,8
2 000
55 VDC
1 100
22 × 40
40
55
115
26
25
9,7
5,5
2,7
25 × 40
30
42
80
18
17
13,4
7,5
3,7
22 × 40
25 × 40
45
32
62
45
115
80
26
18
25
17
9,6
13,3
5,4
7,4
2,7
3,7
1 500
63 VDC
800
1 100
278 10/02
B41607
Automotive – Up to 150 °C
Useful life
depending on ambient temperature TA under ripple current operating conditions at UR1)
KAL0843-H
3,0
Ι~
Ι ~R
B41607
2,5
2,0
1,5
0
40
50
60
70
80
1 000 h
3 000 h
10 000 h
30 000 h
0,5
100 000 h
500 000 h
1,0
90 100 110 120 130 140
˚C 160
TA
Useful life
depending on case temperature TC under ripple current operating conditions at UR1)
KAL0844-Q
3,0
Ι~
Ι ~R
B41607
2,5
2,0
1,5
0
40
50
60
70
80
1 000 h
3 000 h
10 000 h
30 000 h
0,5
100 000 h
500 000 h
1,0
90 100 110 120 130 140
˚C 160
TC
1) Refer to page 40 for an explanation on how to interpret the useful life graphs.
279 10/02
B41607
Automotive – Up to 150 °C
Frequency characteristics of ESR
versus frequency f at different temperatures T
Typical behavior
Frequency factor of permissible
ripple current I~
versus frequency f
KAL0836-Z
1,2
Ι ~f
KAL0835-R
7
B41607
ESR f
ESR 10 kHz
Ι ~10 kHz
0,9
B41607
125 ˚C
85 ˚C
5
0,8
a
b
c
d
0,7
0,6
4
20 ˚C
3
0,5
ø [mm]
UR
25 VDC
40 VDC
55 VDC
63 VDC
0,4
0,3
0,2
0,1
0 2
10
5
10 3
22 25
2
a
b
c
c
b
c
d
d
10
1
0 1
10
5 Hz 10 4
f
Equivalent series resistance ESR
versus frequency f at different temperatures T
Typical behavior for 1500 µF/55 V
_1
KAL0834-I
Ω
_ 40 ˚C
5 10 2
5 10 3
Hz 10 4
f
Impedance Z
versus frequency f at different temperatures T
Typical behavior for 1500 µF/55 V
KAL0833-A
10 1
B41607
ESR
_ 40 ˚C
B41607
Ω
Z
_ 25 ˚C
10 0
5
20 ˚C
10
_2
>_ 60 ˚C
10
_1
5
_ 40 ˚C
_ 25 ˚C
5
10
10
_3
10 1
5 10 2
5 10 3
5 10 4
Hz 10 5
f
20 ˚C
_2
5
280 10/02
10 1
>_ 60 ˚C
5 10 2
5 10 3
5 10 4
Hz 10 5
f
Herausgegeben von EPCOS AG
Unternehmenskommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
++49 89 636 09, FAX (0 89) 636-2 26 89
(
 EPCOS AG 2002. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet.
Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG
oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen.
Published by EPCOS AG
Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
++49 89 636 09, FAX (0 89) 636-2 26 89
(
 EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without
EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics
Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on the type in question please
also contact one of our Sales Offices.
Similar pages