EPCOS B57045K0682K000 Temperature compensation (chassis mounting) Datasheet

Temperature Measurement
B57045
Probe Assemblies
K 45
Applications
■ Temperature compensation (chassis mounting)
■ Temperature measurement (chassis mounting)
■ Temperature control (chassis mounting)
Features
■ Cost-effective
■ Good thermal coupling through screw-type case (thread M3)
■ Electrically isolated aluminum case
Ris > 100 MΩ (V = 100 V dc); V is = 2500 V (test duration: 1 s)
■ Tinned copper leads
Options
Closer resistance tolerance available on request
Dimensions in mm
Approx. weight 1 g
Delivery mode
Bulk
Climatic category (IEC 60068-1)
Max. power at 25 °C
Resistance tolerance
Rated temperature
B value tolerance
Dissipation factor (in air)
Dissipation factor (on chassis)
Thermal cooling time constant (in air)
Thermal cooling time constant (on chassis)
Torque
P25
∆R N/R N
TN
∆B/B
δth
δth
τc
τc
55/125/56
450
± 10 %
25
±3%
approx. 9
approx. 20
approx. 75
approx. 15
approx. 0,5
Ordering code
No. of R/T
characteristic
B 25/100
1k
1011
3730
B57045K0102K000
2,2 k
1013
3900
B57045K0222K000
4,7 k
4001
3950
B57045K0472K000
6,8 k
2903
4200
B57045K0682K000
10,0 k
2904
4300
B57045K0103K000
33
k
1012
4300
B57045K0333K000
47
k
4003
4450
B57045K0473K000
68
k
2005
4600
B57045K0683K000
100
k
2005
4600
B57045K0104K000
150
k
2005
4600
B57045K0154K000
R 25
Ω
K
122 05/02
mW
°C
mW/K
mW/K
s
s
Nm
Temperature Measurement
B57045
Probe Assemblies
K 45
Reliability data
Test
Standard
Test conditions
∆R 25/R25
(typical)
Remarks
Storage in
dry heat
IEC
60068-2-2
Storage at upper
category temperature
T: 125 °C
t: 1000 h
<3%
No visible
damage
Storage in damp
heat, steady state
IEC
60068-2-3
Temperature of air: 40 °C
Relative humidity of air: 93 %
Duration: 56 days
<3%
No visible
damage
Rapid temperature
cycling
IEC
60068-2-14
Lower test temperature: – 55 °C < 3 %
Upper test temperature: 125 °C
Number of cycles: 10
No visible
damage
Endurance
Pmax: 450 mW
t: 1000 h
<3%
No visible
damage
Long-term stability
(empirical value)
T: 125 °C
t: 10 000 h
<5%
No visible
damage
123 05/02
Herausgegeben von EPCOS AG
Unternehmenskommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
++49 89 636 09, FAX (0 89) 636-2 26 89
(
 EPCOS AG 2002. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet.
Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG
oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen.
Published by EPCOS AG
Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
++49 89 636 09, FAX (0 89) 636-2 26 89
(
 EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without
EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics
Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on the type in question please
also contact one of our Sales Offices.
Similar pages