Renesas HD74ALVC1G08VSE 2-input and gate Datasheet

HD74ALVC1G08
2-input AND Gate
REJ03D0110–0600
Rev.6.00
Jun.20.2005
Description
The HD74ALVC1G08 has two–input AND gate in a 5 pin package. Low voltage and high-speed operation is suitable
for the battery powered products (e.g., notebook computers), and the low power consumption extends the battery life.
Features
• The basic gate function is lined up as Renesas uni logic series.
• Supplied on emboss taping for high-speed automatic mounting.
• Supply voltage range : 1.2 to 3.6 V
Operating temperature range : –40 to +85°C
• All inputs VIH (Max.) = 3.6 V (@VCC = 0 V to 3.6 V)
All outputs VO (Max.) = 3.6 V (@VCC = 0 V)
• Output current ±2 mA (@VCC = 1.2 V)
±4 mA (@VCC = 1.4 V to 1.6 V)
±6 mA (@VCC = 1.65 V to 1.95 V)
±18 mA (@VCC = 2.3 V to 2.7 V)
±24 mA (@VCC = 3.0 V to 3.6 V)
• Ordering Information
Part Name
Package Type
Package Code
(Previous Code)
Package
Abbreviation
Taping Abbreviation
(Quantity)
HD74ALVC1G08VSE
VSON-5 pin
PUSN0005KA-A
(TNP-5DV)
VS
E (3,000 pcs/reel)
Outline and Article Indication
• HD74ALVC1G08
Marking
A
VSON-5
Rev.6.00, Jun.20.2005 page 1 of 7
2
= Control code
HD74ALVC1G08
Function Table
Inputs
A
L
L
H
H
H:
L:
Output
Y
L
L
L
H
B
L
H
L
H
High level
Low level
Pin Arrangement
IN B
1
IN A
2
GND
3
5
VCC
4
OUT Y
(Top view)
Absolute Maximum Ratings
Item
Symbol
Ratings
Unit
Supply voltage range
Input voltage range *1
Output voltage range *1, 2
VCC
VI
VO
V
V
V
Input clamp current
Output clamp current
Continuous output current
IIK
IOK
IO
ICC or IGND
–0.5 to 4.6
–0.5 to 4.6
–0.5 to VCC + 0.5
–0.5 to 4.6
–50
±50
±50
±100
mA
mA
mA
mA
PT
200
mW
Tstg
–65 to 150
°C
Continuous current through
VCC or GND
Maximum power dissipation
3
at Ta = 25°C (in still air) *
Storage temperature
Notes:
Test Conditions
Output : H or L
VCC : OFF
VI < 0
VO < 0 or VO > VCC
VO = 0 to VCC
The absolute maximum ratings are values, which must not individually be exceeded, and furthermore no two
of which may be realized at the same time.
1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are
observed.
2. This value is limited to 4.6 V maximum.
3. The maximum package power dissipation was calculated using a junction temperature of 150°C.
Rev.6.00, Jun.20.2005 page 2 of 7
HD74ALVC1G08
Recommended Operating Conditions
Item
Supply voltage range
Input voltage range
Output voltage range
Output current
Symbol
Min
Max
Unit
VCC
VI
VO
IOH
1.2
0
0
—
—
—
—
—
—
—
—
—
—
0
0
–40
3.6
3.6
VCC
–2
–4
–6
–18
–24
2
4
6
18
24
20
10
85
V
V
V
mA
IOL
Input transition rise or fall rate
∆t / ∆v
Operating free-air temperature
Ta
Conditions
VCC = 1.2 V
VCC = 1.4 V
VCC = 1.65 V
VCC = 2.3 V
VCC = 3.0 V
VCC = 1.2 V
VCC = 1.4 V
VCC = 1.65 V
VCC = 2.3 V
VCC = 3.0 V
VCC = 1.2 to 2.7 V
VCC = 3.3±0.3 V
ns / V
°C
Note: Unused or floating inputs must be held high or low.
Electrical Characteristics
Ta = –40 to 85°C
Item
Input voltage
Symbol
VCC (V) *
Min
Typ
Max
Unit
VIH
VCC×0.75
VCC×0.7
VCC×0.7
1.7
2.0
—
—
—
—
—
VCC–0.2
0.9
1.1
1.2
1.7
2.2
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
VCC×0.25
VCC×0.3
VCC×0.3
0.7
0.8
—
—
—
—
—
—
0.2
0.3
0.3
0.3
0.55
0.55
±5
10
V
IIN
ICC
1.2
1.4 to 1.6
1.65 to 1.95
2.3 to 2.7
3.0 to 3.6
1.2
1.4 to 1.6
1.65 to 1.95
2.3 to 2.7
3.0 to 3.6
Min to Max
1.2
1.4
1.65
2.3
3.0
Min to Max
1.2
1.4
1.65
2.3
3.0
3.6
3.6
µA
µA
IOH = –100 µA
IOH = –2 mA
IOH = –4 mA
IOH = –6 mA
IOH = –18 mA
IOH = –24 mA
IOL = 100 µA
IOL = 2 mA
IOL = 4 mA
IOL = 6 mA
IOL = 18 mA
IOL = 24 mA
VIN = 3.6 V or GND
VIN = VCC or GND, IO = 0
IOFF
0
—
—
5
µA
VI or VO = 0 to 3.6 V
CIN
3.3
—
4.5
—
pF
VIN = VCC or GND
VIL
Output voltage
VOH
VOL
Input current
Quiescent
supply current
Output leakage
current
Input capacitance
V
Test condition
Note: For conditions shown as Min or Max, use the appropriate values under recommended operating conditions.
Rev.6.00, Jun.20.2005 page 3 of 7
HD74ALVC1G08
Switching Characteristics
VCC = 1.2 V
Item
Symbol
Propagation delay time
tPLH
tPHL
Ta = –40 to 85°C
Min
Typ
Max
—
7.5
—
Unit
Test
Conditions
ns
CL = 15 pF
Unit
Test
Conditions
ns
CL = 15 pF
Unit
Test
Conditions
ns
CL = 30 pF
Unit
Test
Conditions
ns
CL = 30 pF
Unit
Test
Conditions
ns
CL = 30 pF
FROM
(Input)
A or B
TO
(Output)
Y
VCC = 1.5 ± 0.1 V
Item
Symbol
Propagation delay time
tPLH
tPHL
Ta = –40 to 85°C
Min
Typ
Max
2.0
—
7.0
FROM
(Input)
A or B
TO
(Output)
Y
VCC = 1.8 ± 0.15 V
Item
Symbol
Propagation delay time
tPLH
tPHL
Ta = –40 to 85°C
Min
Typ
Max
1.5
—
5.0
FROM
(Input)
A or B
TO
(Output)
Y
VCC = 2.5 ± 0.2 V
Item
Symbol
Propagation delay time
tPLH
tPHL
Ta = –40 to 85°C
Min
Typ
Max
1.0
—
3.7
FROM
(Input)
A or B
TO
(Output)
Y
VCC = 3.3 ± 0.3 V
Item
Symbol
Propagation delay time
tPLH
tPHL
Ta = –40 to 85°C
Min
Typ
Max
1.0
—
2.8
FROM
(Input)
A or B
TO
(Output)
Y
Operating Characteristics
Item
Power dissipation
capacitance
Symbol
VCC (V)
Min
Ta = 25°C
Typ
Max
Unit
CPD
1.5
—
10.5
—
pF
1.8
—
10.5
—
Rev.6.00, Jun.20.2005 page 4 of 7
2.5
—
10.5
—
3.3
—
11.5
—
Test Conditions
f = 10 MHz
HD74ALVC1G08
Test Circuit
VCC
Pulse
Generator
Input
Output
Z out = 50 Ω
RL
CL
Symbol
V CC = 1.2 V,
V = 2.5±0.2 V,
V = 1.8±0.15 V CC
1.5±0.1 V CC
3.3±0.3 V
RL
2.0 kΩ
1.0 kΩ
500 Ω
CL
15 pF
30 pF
30 pF
Note: CL includes probe and jig capacitance.
Rev.6.00, Jun.20.2005 page 5 of 7
HD74ALVC1G08
Waveforms
tr
tf
Input
VIH
90%
90%
V ref
V ref
10%
10%
t PLH
GND
t PHL
VOH
Output
V ref
V ref
VOL
Symbol
V CC = 1.2 V,
1.5±0.1 V, V CC = 2.5±0.2 V
1.8±0.15 V
V CC = 3.3±0.3 V
tr / t f
2.0 ns
2.5 ns
2.5 ns
V IH
VCC
VCC
2.7 V
V ref
50%
50%
1.5 V
Note: Input waveform : PRR = 10 MHz, duty cycle 50%
Rev.6.00, Jun.20.2005 page 6 of 7
HD74ALVC1G08
Package Dimensions
JEITA Package Code
P-USON5-1.2x1.6-0.50
RENESAS Code
PUSN0005KA-A
MASS[Typ.]
0.002g
Previous Code
TNP-5D/TNP-5DV
D
L1
1.0 ±0.1
4
( 0.1 )
HE
E
( 0.1 )
5
1
Reference
Symbol
3
c
Dimension in Millimeters
Min
Nom
Max
D
1.55
1.6
1.65
E
1.1
1.2
1.3
A
0.6
A1
A2
A
b
0.15
0.2
0.3
b1
e
0.5
Lp
x
e
b
y
ZD
c
0.07
0.12
0.22
1.55
1.6
1.65
c1
HE
L1
Rev.6.00, Jun.20.2005 page 7 of 7
0.2
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
http://www.renesas.com
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology (Shanghai) Co., Ltd.
Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, China
Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> 2-796-3115, Fax: <82> 2-796-2145
Renesas Technology Malaysia Sdn. Bhd.
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
© 2005. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .3.0
Similar pages