FCI GFZ10D 1.0 amp glass passivated sintered rectifier Datasheet

1.0 Amp Glass Passivated
Sintered Rectifiers
Preliminary Data Sheet
Mechanical Dimensions
GFZ10A . . . 10Q Series
Description
Package
‘‘SMA’’
Features
n LOWEST COST FOR GLASS SINTERED
CONSTRUCTION
n 1.0 AMP OPERATION @ TA = 135°C, WITH
NO THERMAL RUNAWAY
n LOWEST VF FOR GLASS SINTERED
CONSTRUCTION
n SINTERED GLASS CAVITY-FREE
JUNCTION
n TYPICAL IR < 100 nAmps
Electrical Characteristics @ 25 o C.
Maximum Ratings
Units
GFZ10A . . . 10Q Series
10A
10B
Peak Repetitive Reverse Voltage...VRRM
50
100
200
400
600
8 0 0 1000 1100 1200
Volts
RMS Reverse Voltage...VR(rms)
35
70
140
280
420
560
840
Volts
50
100
200
400
600
8 0 0 1000 1100 1200
Volts
DC Blocking Voltage...VDC
10D
10G
10J
10K 1 0 M 10N
700
770
10Q
Average Forward Rectified Current...IF(av)
@ TA = 135°C (Note 2)
............................................. 1.0 ...............................................
Amps
Non-Repetitive Peak Forward Surge Current...IFSM
½ Sine Wave Superimposed on Rated Load
............................................. 3 0 ...............................................
Amps
Forward Voltage @ 1.0A...VF
< ..................... 1.1 .................. >
Full Load Reverse Current...IR(av)
Full Cycle Average @ TA = 75°C
DC Reverse Current...IR(max)
@ Rated DC Blocking Voltage
TA = 25°C
TA = 150°C
Typical Junction Capacitance...CJ (Note 1)
< ............. 1.2 ......... >
Volts
............................................. 3 0 ...............................................
µAmps
............................................. 5.0 ...............................................
............................................. 1 0 0 ...............................................
µAmps
µAmps
< ............................... 8.0 ........................... > < .... 7.0 .... >
pF
Typical Thermal Resistance...RθJA (Note 2)
............................................. 4 5 ...............................................
°C / W
Typical Reverse Recovery Time...tRR (Note 3)
............................................. 2.0 ...............................................
µS
Operating & Storage Temperature Range...TJ, TSTRG ......................................... -65 to 175 ..........................................
°C
Die Dimension (mils)
Forward Current Derating Curve
A
T
Amps
D
Glass
G
d
D
68
TL = Lead Temperature (°°C)
d
G
43 2+0.5
T
11
A
15+1
Typical Junction Capacitance
Non-Repetitive
Peak Forward Surge Current
TJ = 25°°C
f = 1.0 MHZ
VSIG = 50mVp-p
Amps
pF
TJ = 75°°C
8.3 mS Single Half Sine Wave
(Jedec Method)
GFZ10A . . . 10Q Series
1.0 Amp Glass Passivated
Sintered Rectifiers
Preliminary Data Sheet
Number of Cycles @ 60 HZ
Typical Instantaneous Forward Characteristics
Reverse Voltage (Volts)
Typical Reverse Characteristics
TJ = 25°°C
µS
Pulse Width = 300µ
1% Duty Cycle
µ Amps
Amps
TJ = 125°°C
TJ = 75°°C
TJ = 25°°C
Volts
Percent of Rated Peak Voltage
NOTES: 1. Measured @ 1 MHZ and applied reverse voltage of 4.0V.
2. 5.0mm2 (.013mm thick) land areas.
3. Reverse Recovery Condition IF = 0.5A, IR = 1.0A, IRR = 0.25A.
Ratings at
25 Deg. C ambient
temperature
unless otherwise
specified.
Single Phase Half
Wave, 60 HZ
Resistive or
Inductive Load.
For Capacitive
Load, Derate
Current by 20%.
Similar pages