Vishay LCC Hermetic, 50 mil pitch, leadless thin film chip resistor Datasheet

LCC, TLCC
www.vishay.com
Vishay Dale Thin Film
Hermetic, 50 mil Pitch, Leadless Thin Film Chip Resistor,
Surface Mount Network
FEATURES
• High purity alumina substrate for high power
dissipation
• Leach resistant terminations with nickel barrier
Available
• 16, 20, 24 terminal gold plated wraparound
true hermetic packaging
Available
• Military/aerospace
• Hermetically sealed
• Isolated/bussed circuits
• Ideal for military/aerospace applications
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Actual Size
Vishay Dale Thin Film offers a wide resistance range in 16,
20, and 24 terminal hermetic leadless chip carriers. The
standard circuits in the ohmic ranges listed below will utilize
the outstanding wraparound terminations developed for
chip resistors. Should one of the standards not fit your
application, consult the applications engineering group as
we may be able to meet your requirements.
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
TYPICAL PERFORMANCE
ABSOLUTE
25
ABSOLUTE
0.1
TCR
TOL.
Note
• Resistance range: Noted on schematics.
TRACKING
5
RATIO
NA
SCHEMATIC
TLCC 16 A01
TLCC 20 A01
TLCC 24 A01
LCC 20A
1 kΩ to 100 kΩ
10 9 8 7
10 Ω to 200 kΩ
13 12 11 10 9
1 kΩ to 100 kΩ
151413121110
(10 Isolated Resistors)
10 Ω to 250 kΩ
13 12 11 10 9
11
12
13
14
6
5
4
3
14
15
16
17
18
8
7
6
5
4
16
17
18
19
20
21
9
8
7
6
5
4
15 16 1 2
19 20 1 2 3
22 23 24 1 2 3
TLCC 16 A03
TLCC 20 A03
TLCC 24 A03
100 Ω to 100 kΩ
10 9 8 7
10 Ω to 120 kΩ
13 12 11 10 9
1 kΩ to 100 kΩ
1514 13 12 1110
11
6
12
5
13
4
14
3
14
15
16
17
18
8
7
6
5
4
19 20 1 2 3
22 23 24 1 2 3
TLCC 16 A06
TLCC 20 A06
TLCC 24 A06
100 Ω to 100 kΩ
10 9 8 7
1 kΩ to 110 kΩ
13 12 11 10 9
1 kΩ to 100 kΩ
151413121110
15 16 1
2
11
6
12
5
13
4
14
3
15 16
Revision: 14-Jul-16
1
2
14
15
16
17
18
8
7
6
5
4
19 20 1 2 3
16
17
18
19
20
21
8
7
6
5
4
19 20 1 2 3
LCC 20B
9
8
7
6
5
4
16
17
18
19
20
21
14
15
16
17
18
(19 Resistors + 1 Common Point)
10 Ω to 200 kΩ
13 12 11 10 9
14
15
16
17
18
8
7
6
5
4
19 20 1 2 3
9
8
7
6
5
4
22 23 24 1 2 3
Document Number: 60012
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCC, TLCC
www.vishay.com
Vishay Dale Thin Film
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
Material
CONDITIONS
Passivated nichrome
-
16, 20, 24
-
Pin/Lead Number
10  to 250 k per resistor
-
TCR: Absolute
± 25 ppm/°C to ± 300 ppm/°C
-55 °C to +125 °C
TCR: Tracking
± 5 ppm/°C
-55 °C to +125 °C
± 0.1 % to ± 1.0 %
+25 °C
N/a
-
Resistance Range
Tolerance: Absolute
Tolerance: Ratio
50 mW max. = common circuits
Power Rating: Resistor
Maximum at +70 °C
100 mW max. = isolated circuits
Power Rating: Package
500 mW
Maximum at +70 °C
R ± 0.05 %
2000 h at +70 °C
-
-
< 5 ppm/V (typical)
-
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
100 V max. not to exceed
P x R
-
Operating Temperature Range
-55 °C to +125 °C
-
Storage Temperature Range
-55 °C to +150 °C
-
Noise
< -30 dB
-
Thermal EMF
0.008 μV/°C
-
Shelf Life Stability: Absolute
R ± 0.01 %
1 year at + 25 °C
-
-
Shelf Life Stability: Ratio
Note
• Tantalum nitride film is custom, consult factory.
DIMENSIONS in inches and millimeters
D
max.
B
G
typ.
0.008"
(0.203)
R Typ.
Terminal 1
C
Terminal 1
Indicator
F
A
typ.
DIMENSION
H
E
Typ.
16 PINS
Index
Corner
20 PINS
24 PINS
INCHES
MILLIMETERS
INCHES
MILLIMETERS
INCHES
MILLIMETERS
A
0.050
1.27
0.050
1.27
0.050
1.27
B
0.300
7.26
0.350
8.89
0.400
10.16
C
0.300
7.26
0.350
8.89
0.400
10.16
D
0.077
1.96
0.077
1.96
0.077
1.96
E
0.025
0.635
0.025
0.635
0.025
0.635
1.27
F
0.050
1.27
0.050
1.27
0.050
G
0.040
1.02
0.040
1.02
0.040
1.02
H
0.020
0.508
0.020
0.508
0.020
0.508
Revision: 14-Jul-16
Document Number: 60012
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCC, TLCC
www.vishay.com
Vishay Dale Thin Film
MECHANICAL SPECIFICATIONS
Resistive Element
Passivated nichrome
Substrate Material
Alumina
Body
Ceramic
Terminals
Gold over nickel
Marking Resistance to Solvents
Per MIL-PRF-83401
Tin Lead Option
Sn63
Lead (Pb)-free Option
96.5 % Sn, 3.0 % Ag, 0.5 % Cu
Tin Lead and Lead (Pb)-free
Hot solder dip
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: TLCC20AE1002BUF
T
T
L
C
C
2
0
L
C
C
T
1
6
GLOBAL
MODEL
(4 or 5 digits)
A
A
0
TERMINAL
COUNT (1)
SCHEMATICS
(4 or 5 digits)
TCR
CHARACTERISTICS
LCC
(Tin lead)
20
LCCT
(Lead
(Pb)-free)
(e1)
20
A = Isolated
resistors
B = Resistor to
common bus
E = 25 ppm/°C
H = 50 ppm/°C
K = 100 ppm/°C
M = 300 ppm/°C
TLCC
(Tin lead)
16
20
24
TLCCT
(Lead
(Pb)-free)
(e1)
16
20
24
1
E
1
0
0
2
B
U
F
K
1
0
0
3
K
U
F
RESISTANCE
TOLERANCE
PACKAGING
First 3 digits are
significant figures
and the last digit
specifies the
number of zeros to
follow.
B = 0.1 %
D = 0.5 %
F = 1 %
G = 2 %
J = 5 %
K = 10 %
S = Special
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel 2000
TS = 100 min., 1 mult
Example:
10R0 = 10 
12R5 = 12.5 
1000 = 100 
1001 = 1000 
A01 = Resistor to 
common 
bus
A03 = Isolated 
parallel
resistor
A06 = Isolated
adjacent
resistor
UF = TUBED
Historical Part Number example: LC20BK1003J (for reference purposes only)
LC
20
B
K
1003
J
SERIES
PINS
SCHEMATIC
TCR
CHARACTERISTIC
RESISTANCE
TOLERANCE
Note
(1) LCC or LCCT only available in 20 pin size.
Revision: 14-Jul-16
Document Number: 60012
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
Similar pages