Connor-Winfield OFC5DJ1AA-20.00M Surface mount high stability hcmos ocxo Datasheet

THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX
(630) 851-5040.
PHONE (630) 851-4722.
WWW.CONWIN.COM
PRODUCT
D ATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS
SURFACE MOUNT HIGH STABILITY HCMOS OCXO
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Storage Temperature
Supply Voltage
MINIMUM
-40
NOMINAL
-
MAXIMUM
85
UNITS
°C
(Vcc)
-0.5
-
7
Vdc
MINIMUM
NOMINAL
MAXIMUM
UNITS
NOTE
OFC5DJ1AA
OPERATING SPECIFICATIONS
Center Frequency
Frequency Calibration
Frequency Stability
Aging: Daily
Aging: First Year
Aging: Short Term (1Sec.)
Aging: Long Term (20 Years)
Operating Temperature Range
(Fo)
Supply Voltage
(Vcc)
Frequency vs. Voltage Stability (+/-5%)
Frequency vs. Load Stability (+/-20%)
Power Consumption: Turn On
Power Consumption: Steady-State
Start-Up Time
Warm Up
TABLE 2.0
20
-1.5
-20
-2
-80
-300
0
5.00E-11
-
1.5
20
2
80
300
70
MHz
ppm
ppb
ppb/day
ppb
RMS
ppb
°C
4.75
5.00
5.25
Vdc
-5
-2
-
-
-100
-
5
2
3.00
1. 50
500
100
ppb
ppb
W
W
mS
ppb
MINIMUM
NOMINAL
MAXIMUM
UNITS
12
Vcc-0.2V
45
-
15
50
-80
-110
-135
-145
18
0.2
55
5
-
pF
Vdc
Vdc
%
nS
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
-
-150
-
dBc/Hz
HCMOS OUTPUT CHARACTERISTICS
PARAMETER
LOAD
Voltage
(High)
(Low)
Duty Cycle at 50% of Vcc
Rise / Fall Time 10% to 90%
SSB Phase Noise at 1Hz offset
SSB Phase Noise at 10Hz offset
SSB Phase Noise at 100Hz offset
SSB Phase Noise at 1KHz offset
(Voh)
(Vol)
SSB Phase Noise at 10KHz offset
CONNOR
WINFIELD
OFC5DJ1AA
20 MHz
0 PPM
0648
S/N 123456
TABLE 1.0
UNITS
PARAMETER
1
NOTE
1
2
3
4
5
6
7
8
8
9
10
TABLE 3.0
RESTABILIZATION TIME
Off Time
< 1 Hour
< 6 Hours
< 24 Hours
1 to 16 Days
> 16 Days
NOTE
12
The Connor Winfield
OFC5DJ1AA is a 5V Surface
Mount Oven Controlled
Crystal Oscillator (OCXO)
with an HCMOS output. The
OFC5DJ1AA is designed for
high frequency stability
applications requiring low jitter
and tight frequency stability.
FEATURES
FIXED FREQUENCY OCXO
5.0V OPERATION
FREQUENCY STABILITY:
+/-20ppb
TEMPERATURE RANGE:
0 TO 70C
TABLE 4.0
NOTE
13
13
13
13
13
Restabilization Time
< 2 Hours
< 12 Hours
< 48 Hours
48 Hours + ¼ Off Time
< 6 Days
DESCRIPTION
PACKAG E CHARACTERISTICS
TABLE 5.0
Non-hermetic package consisting of an FR4 substrate with grounded metal
cover.
ENVIRONMNETAL CHARACTERISTICS
TABLE 6.0
Shock
100G’s, 6mS, halfsine per MIL-STD-202F, Method 213B, Test Condition C
Vibration
0.06” D.A. or 10G peak 10 to 500 Hz, per MIL-STD-202F, Method 204D, Test
condition A
PROCESS RECOMMENDATIONS
TABLE 7.0
Solder Reflow
The component solder used internal to this device has a melting point of
221°C. The peak temperature inside the device should be less than or equal
to 220°C for a maximum of 10 seconds
Wash
Ultrasonic cleaning is not recommended.
Package
HCMOS OUTPUT
SURFACE MOUNT PACKAGE
TAPE AND REEL PACKAGING
RoHS 5/6 COMPLIANT
ORDERING INFORMATION
OFC5DJ1AA - 20.00MHz
OCXO
SERIES
CENTER
FREQUENCY
Specifications subject to change without notice.
DATA SHEET #:
Cx114
PAGE 1
OF
2
REV: 00
DATE:
12/14/06
aCopyright 2001 Connor-Winfield all rights reserved.
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX
(630) 851-5040.
PHONE (630) 851-4722.
WWW.CONWIN.COM
PRODUCT
D ATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS
Notes:
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
Pin Connections
Labels will include the calibr ation frequency at the time of ship.
Initial calibration @ 25°C
Frequency vs. temperature stability, -20 to 70°C, referenced @ 25°C.
After ten days of continuous operation.
Allen Variance: 1 second, 100 a verage.
Frequency vs. change in supply voltage.
Frequency vs. change in load.
Vcc = 5.0Vdc.
From Vcc=90% of final value. No m ore than 16 transitions at start-up before oscillator
has started.
Measured @ -20°C, within 5 minutes, referenced one hour after turn-on.
At time of delivery.
HCMOS load.
For a given off time, the time r equired to meet daily aging, short-term stability
Package Outline
TABLE 8.0
Function
N/C
Ground
N/C
Ground
Vcc
Vcc
Ground
Ground
N/C
Ground
Output
Ground
N/C
Pin
1
2
6
7
8
9
10
11
12
13
14
15
16
Suggested Pad Layout
.500 MAX
12.7
.270
(6.85mm)
1
CONNOR
WINFIELD
.260
(6.60mm)
OFC5DJ1AA
20 MHz
0 PPM
0648
S/N 123456
.260
(6.60mm)
.270
(6.85mm)
.260
(6.60mm)
.360
(9.14mm)
KEEP OUT AREAS (4 PLACES)
Solder Profile
Test Circuit
Temperature
225°C
Ramp-Up Rate
3°C/second max.
from 150°C to 225°C.
225°C
tp
Ramp-Down Rate
6°C/second max.
183°C
150°C
10
7
11
6
100°C
12
13
25°C
14
15
2
0
Time
60-120s
Max.
10-30s
60-150s Max.
360 Sec. Max.
Specifications subject to change without notice.
DATA SHEET #:
Cx114
PAGE 2
OF
2
REV: 00
DATE:
12/14/06
aCopyright 2001 Connor-Winfield all rights reserved.
Similar pages