NKK MB2411S2W40 Snap-action pushbutton Datasheet

Snap-Action Pushbuttons
Series MB2400
Distinctive Characteristics
Snap-acting mechanism gives smooth actuation, short stroke,
light touch, and audible feedback. This mechanism also provides
long mechanical life.
High torque bushing construction prevents rotation or separation
from frame during installation.
Antijamming design protects contacts from damage due to
excessive downward force on the actuator.
Compatible companions with M series toggles. Body,
bushing, and footprint dimensions ideal for mounting
MB2400 pushbuttons and M toggles next to one another.
Stainless steel frame resists corrosion.
Longer center solder lug terminal simplifies wiring and
soldering.
Silver contacts of specially composed alloy for hardness.
Epoxy sealed terminals prevent entry of solder flux and other
contaminants.
Prominent external insulating barriers increase insulation resistance
and dielectric strength.
Actual Size
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Snap-Action Pushbuttons
Series MB2400
General Specifications
Electrical Capacity (Resistive Load)
Power Level (code W):
Logic Level (code G):
Logic/Power Level (code A):
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Nominal Operating Force:
Travel
Materials & Finishes
Plunger:
Bushing:
Frame:
Case:
Base:
Movable Contactor:
Movable Contacts:
Stationary Contacts:
Terminals:
Environmental Data
Operating Temp Range:
Humidity:
Vibration:
Shock:
Installation
Mounting Torque:
Cap Installation Force:
Soldering:
Cleaning:
Standards & Certifications
Flammability Standards:
UL & C-UL Recognized:
R
CSA Certified:
3A @ 125V AC
0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Combines W & G ratings
Note: Find additional explanation of dual rating & operating range in Supplement section.
20 milliohms maximum for silver; 30 milliohms maximum for gold
1,000 megohms minimum @ 500V DC
1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts & case for 1 minute minimum
200,000 operations minimum
25,000 operations minimum for silver; 100,000 operations minimum for gold
Single pole 2.45N; double pole 3.92N
Pretravel .024” (0.6mm); Overtravel .016” (0.4mm); Total Travel .039” (1.0mm)
Brass with nickel plating
Brass with nickel plating
Stainless steel
Polybutylene terephthalate (PBT)
Diallyl phthalate resin
Phosphor bronze with silver or gold plating
Silver alloy (code W); copper with gold plating (code G); or silver alloy with gold plating (code A)
Silver alloy with silver plating (code W); copper or brass with gold plating (code G); or
silver with gold plating (code A)
Copper or brass with silver plating; copper or brass with gold plating
–30°C through +85°C (–22°F through +185°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
50G (490m/s2) acceleration (tested in 6 right angled directions, with 3 shocks in each direction)
1.5Nm (13.0 lb • in) for double nut; 0.7Nm (6.0 lb • in) for single nut
80.0N (18.0 lbf) maximum downward force on actuator
Wave Soldering (PC version): See Profile B in Supplement section.
Manual Soldering: See Profile B in Supplement section.
These devices are not process sealed. Hand clean locally using alcohol based solution.
See Cleaning Specifications in Supplement section.
UL94V-0 available
All single and double pole models recognized at 3A @ 125V AC or 0.4VA max. @ 28V DC max;
UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch
C-UL File No. WOYR8.E44145; add “/C-UL” to end of part number to order C-UL mark on switch.
Single pole models with PC, solder lug, or Wirewrap terminals & double pole with PC or
Wirewrap terminals certified at 3A @ 125V AC or 0.4VA @ 28V maximum;
CSA File No. 023535-0-000; add “/C” to end of part number to order CSA mark on switch.
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Series MB2400
Snap-Action Bracket PC Mount
TYPICAL SWITCH ORDERING EXAMPLE
A2
11
MB24
POLES & CIRCUITS
11
61
SPDT
DPDT
ON
ON
G
40
CONTACT MATERIALS
& RATINGS
(ON)
(ON)
W
Silver
Rated 3A @ 125V AC
G
Gold
Rated 0.4VA max @
28V AC/DC max
A
Gold over Silver
Rated 3A @ 125V AC
& 0.4VA max @ 28V
AC/DC max
( ) = Momentary
BUSHINGS
F
A
CAPS
F
.201” (5.1mm) Dia.
H
.295” (7.5mm) Dia.
CAP COLORS
A
Black
B
White
C
Red
A2
.280” (7.1mm)
Smooth with Keyway
A1
.280” (7.1mm)
Threaded with Keyway
E2
.285” (7.24mm)
Smooth with D Flat
E1
.285” (7.24mm)
Threaded with D Flat
13
.250” (6.35mm) Straight PC with .465” (11.8mm) Bracket
.350” (8.9mm)
Smooth with Keyway
15
.425” (10.8mm) Straight PC with .630” (16.0mm) Bracket
S2
17
.964” (24.5mm) Straight PC with 1.150” (29.2mm) Bracket
S1
.350” (8.9mm)
Threaded with Keyway
TERMINALS
With Bracket
With Reinforced Bracket
IMPORTANT:
23
.250” (6.35mm) Straight PC with .465” (11.8mm) Bracket
25
.425” (10.8mm) Straight PC with .630” (16.0mm) Bracket
26
.750” (19.05mm) Straight PC with .953” (24.2mm) Bracket
With Terminal Support
Switches are supplied without UL,
C-UL, & CSA markings unless
specified. Specific models & ratings noted on General Specifications page.
30
Right Angle PC
32
Right Angle PCB w/Reverse Circuit (1-pole & 0.4VA rating only)
40
Vertical PC
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
MB2411A2G40-FA
.280” (7.1mm) Smooth Bushing
with Keyway
Vertical PC Terminals
Black .201” (5.1mm) Diameter Cap
SPDT ON-(ON) Circuit
Gold Contacts with
0.4VA Rating
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Snap-Action Bracket PC Mount
Series MB2400
POLES & CIRCUITS
Plunger Position
( ) = Momentary
Normal
Connected Terminals
Down
Keyway
Normal
Throw & Switch Schematics
Down
Keyway
Note: Terminal numbers are not actually
on the switch.
* When using terminal code 32, connected
terminals and schematic are reversed.
Pole
Model
SP
*MB2411
ON
(ON)
1-3
1-2
SPDT
DP
MB2461
ON
(ON)
1-3 4-6
1-2 4-5
DPDT
1 (COM)
3
2
1 (COM)
3
2
4
6
5
BUSHINGS
Note: Plunger selection is not required for MB2400 pushbuttons.
The plunger can be used with or without a cap.
A2
.280” (7.1mm)
Smooth with Keyway
(8.0) Dia
.315
(5.54) (7.1)
.218 .280
.280” (7.1mm)
Threaded with Keyway
(0.8)
.031
(8.0) Dia
.315
(8.0) Dia
.315
Maximum Panel Thickness with
Standard Hardware: .068” (1.74mm)
(2.5)
.098
(0.9)
.035
Maximum Panel Thickness with
Standard Hardware: .068” (1.74mm)
(0.9)
.035
1/4-40 Thd
(2.84) Dia
.112
(8.0) Dia
.315
(5.54) (7.24)
.218 .285
(8.9)
.350
.350” (8.9mm)
Threaded with Keyway
(0.8)
.031
(2.5)
.098
(0.9)
.035
(5.54)
.218
S1
1/4-40 Thd
(2.84) Dia
.112
(2.5)
.098
(2.5)
.098
(0.9)
.035
.285” (7.24mm)
Threaded with D Flat
1/4-40 Thd
(2.84) Dia
.112
(5.54) (7.1)
.218 .280
(8.0) Dia
.315
(5.54) (7.24)
.218 .285
E1
(6.2) Dia
.244
(2.84) Dia
.112
(0.8)
.031
(2.5)
.098
(0.9)
.035
.350” (8.9mm)
Smooth with Keyway
S2
(6.2) Dia
.244
(2.84) Dia
.112
(2.5)
.098
A1
.285” (7.24mm)
Smooth with D Flat
(6.2) Dia
.244
(2.84) Dia
.112
(0.8)
.031
(8.0) Dia
.315
E2
(5.54)
.218
(8.9)
.350
(0.9)
.035
Maximum Panel Thickness with
Standard Hardware: .134” (3.40mm)
Panel Cutouts
For A1, A2, S1, or S2 Bushing
with Keyway
For E1 or E2 Bushing
with D Flat
(5.6)
.220
(6.5) Dia
.256
(0.6)
.024
(6.5) Dia
.256
With
Optional Locking Ring
(5.8)
.228
(6.5) Dia
.256
(2.2) Dia
.087
(6.5)
.256
Standard hardware includes 2 hex nuts & 1 lockwasher.
Hardware is illustrated following the Typical Switch Dimension drawings.
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Snap-Action Bracket PC Mount
Series MB2400
CONTACT MATERIALS & RATINGS
W
Silver over Silver
Power Level
3A @ 125V AC
G
Gold over Brass or Copper
Logic Level
0.4VA maximum @ 28V AC/DC maximum
Note: Complete explanation of operating range in Supplement section.
A
Power Level
or Logic Level
Gold over Silver
3A @ 125V AC
or 0.4VA maximum @ 28V AC/DC maximum
Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits
within the same application. See Supplement section for complete explanation of dual rating and operating range.
TERMINALS
Straight PC Mount with Bracket
.250”
(6.35mm)
Terminal w/.465”
(11.8mm) Bracket
13
30
Straight PC Mount with Reinforced Bracket
.425”
(10.8mm)
Terminal w/.630”
(16.0mm) Bracket
15
32
Right Angle PC
.964”
(24.5mm)
Terminal w/1.150”
(29.2mm) Bracket
17
.250”
(6.35mm)
Terminal w/.465”
(11.8mm) Bracket
23
.425”
(10.8mm)
Terminal w/.630”
(16.0mm) Bracket
25
Right Angle PCB w/Reverse Circuit
Available only in single pole with
0.4VA rating (code G)
40
.750”
(19.05mm)
Terminal w/.953”
(24.2mm) Bracket
26
Vertical PC
PCB footprints are on the following Typical Switch Dimension pages.
CAPS & CAP COLORS
F
AT475
.201” (5.1mm)
Diameter Cap
(5.1) Dia
.201
(6.4)
.253
H
(4.0)
.157
AT496
.295” (7.5mm)
Diameter Cap
Material: Polyamide
Material: Polyamide
Finish: Glossy
Finish: Glossy
Cap Colors
Available:
A
Black
B
White
(7.5) Dia
.295
(6.4)
.253
C
(4.0)
.157
Red
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Series MB2400
Snap-Action Bracket PC Mount
TYPICAL SWITCH DIMENSIONS
Straight PC • Bracket
(6.4)
.253
(7.1)
.280
(5.1) Dia Typ
.201
(2.8) Dia Typ
.112
(6.2) Dia Typ
.244
Single
Pole
(2.4)
.096
(0.9)
.035
TERMINAL
LENGTH
BRACKET
LENGTH
1
C
2
NO
3
NC
(0.5) Typ
.020
(0.8) Typ
.031
(4.7) Typ
.185
MB2411A2G13-FA
(4.5) Typ
.177
(4.8) Typ
.189
(1.17) Typ
.046
(1.17) Typ
.046
(4.8) Typ
.189
(3.2) Typ
.126
(8.0)
.315
(15.8)
.622
Terminal
Code:
Terminal
Length:
Bracket
Length:
13
.250 (6.35mm)
.465 (11.8mm)
15
.425 (10.8mm)
.630 (16.0mm)
17
.964 (24.5mm)
1.150 (29.2mm)
Double
Pole
(12.7)
.500
(1.6) Typ
.063
(2.4) Typ
.095
(1.6) Typ
.063
(7.9) Typ
.311
(4.7) Typ
.185
3
(7.9) Typ
.311
2
(4.7) Typ
.185
1
(1.8) Dia Typ
.073
(1.5) Dia Typ
.059
3
6
2
5
1
4
(1.8) Dia Typ
.073
(1.5) Dia Typ
.059
CL
Straight PC • Reinforced Bracket
(6.4)
.253
(7.1)
.280
(5.1) Dia Typ
.201
(2.8) Dia Typ
.112
(6.2) Dia Typ
.244
Single
Pole
(2.4)
.096
(0.9)
.035
TERMINAL
LENGTH
BRACKET
LENGTH
1
C
2
NO
(0.5) Typ
.020
(0.8) Typ
.031
(4.7) Typ
.185
3
NC
(4.5) Typ
.177
(4.8) Typ
.189
(1.27) Typ
.050
(1.17) Typ
.046
(6.35) Typ
.250
(4.8) Typ
.189
(19.05)
.750
MB2411A2G23-FA
Double
Pole
(9.1)
.358
(2.4) Typ
.095
(3.18) Typ
.125
(3.18) Typ
.125
Terminal
Code:
Terminal
Length:
Bracket
Length:
(9.53) Typ
.375
23
.250 (6.35mm)
.465 (11.8mm)
(4.7) Typ
.185
25
.425 (10.8mm)
.630 (16.0mm)
26
.750 (19.05mm)
.953 (24.2mm)
3
2
(1.8) Dia Typ
.073
(1.5) Dia Typ
.059
(12.7)
.500
1
(9.53) Typ
.375
(4.7) Typ
.185
(1.8) Dia Typ
.073
(1.5) Dia Typ
.059
3
6
2
5
1
4
CL
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Series MB2400
Snap-Action Bracket PC Mount
TYPICAL SWITCH DIMENSIONS
Right Angle PC
Single Pole
(2.84) Dia
.112
(6.2) Dia
.244
Keyway
(5.1) Dia
.201
(2.9)
.114
(5.08)
.200
(1.4) Typ
.055
(2.4)
.096
(13.0)
.512
MB2411A2G30-FA
(7.9)
.311
(6.22)
.245
(6.4)
.253
Right Angle PC
(7.32)
.288
1
3
(0.4)
.016
(12.7)
.500
(0.8) Typ
.031
(4.7) Typ
.185
(1.27)
.050
1
(12.7)
.500
(4.3)
.169
(2.84) Dia
.112
(6.2) Dia
.244
(1.8) Dia Typ
.073
(2.54) Typ
.100
(2.9)
.114
(5.08)
.200
(12.7)
.500
(1.4) Typ
.055
(2.4)
.096
(6.4)
.253
(13.0)
.512
MB2461A2G30-FA
(6.2)
.245
Right Angle PCB
(7.32)
.288
(4.7) Typ
(3.81) .185 6
.150
COM NO NC
(5.1) Dia
.201
4
5
6
1
2
3
3
(0.8) Typ
.031
(4.7) Typ
.185
(1.27) Typ
.050
(3.8)
.150
4
2
1
(12.7)
.500
(4.3)
.169
(0.4)
.016
(12.7)
.500
5
(1.8) Dia Typ
.073
(2.54) Typ
.100
Single Pole • Reverse Circuit
(2.84) Dia
.112
(6.2) Dia
.244
Keyway
(7.9)
.311
(5.1) Dia
.201
(1.4) Typ
.055
(5.08)
.200
(6.4)
.253
(6.2)
.245
(2.4)
.096
(8.9)
.350
(0.4)
.016
(9.3)
.365
(3.96) Typ
.156
NC NO COM
(4.6)
.180
Vertical PC
3
(2.7)
.106
(0.8)
.031
2
1
(8.5)
.335
(1.4) Typ
.055
(3.96) Typ
.156
(13.0)
.512
1
2
3
(9.27)
.365
(1.8) Dia Typ
.073
(2.54) Typ
.100
3
Single Pole
(2.84) Dia
.112
(6.2) Dia
.244
Keyway
(1.4) Typ
.055
(5.08)
.200
(2.4)
.096
NC
(6.2)
.245
(6.4)
.253
(7.32)
.288
(0.4)
.016
(12.7)
.500
(3.81) Typ
.150
3
NO
2
COM
1
(12.7)
.500
(1.27)
.050
(8.0)
.315
(2.7)
.106
(0.8) Typ
.031
(3.8) Typ
.150
(1.8) Dia Typ
.073
(2.54) Typ
.100
(2.4) Typ
.094
NC
6
3
NO
5
2
COM
4
1
Double Pole
2
1
(13.0)
.512
(5.1) Dia
.201
MB2411A2G40-FA
2
2
3
Double Pole
Keyway
MB2411A2G32-FA
(4.7) Typ
.185
COM NO NC
(4.8)
.189
(12.7)
.500
(3.81) Typ
.150
(1.27) Typ
.050
3
6
2
5
1
4
(12.7)
.500
(1.8) Dia Typ
.073
(2.54) Typ
.100
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Snap-Action Bracket PC Mount
Series MB2400
HARDWARE
Standard Hardware
1/4-40 Thd
AT513H Inch Threaded
Hexagon Nut
(8.0)
.315
2 included with each switch
AT509
Lockwasher
(6.4) Dia (10.2) Dia
.252
.402
1 included with each switch
Material:
Brass with Nickel Plating
(9.0)
.354
(1.5)
.059
Material:
Steel with Zinc/Chromate
(0.5)
.020
Optional Hardware
AT507H
Locking Ring
for A1 or S1 Bushing
(6.35) Dia
.250
(12.0) Dia
.472
(2.0)
.079
Material:
Steel with Zinc/Chromate
Material:
Steel with Zinc/Chromate
(5.5) or
.229
(1.7)
.067
AT515
Locking Ring
for E1 Bushing
(0.8)
.031
(6.2) Dia
.244
(2.0)
.079
(1.68)
.066
(5.5)
.217
(12.0) Dia
.472
(0.8)
.031
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Similar pages