Mean Well HSP-150-5 150w single output with pfc function Datasheet

HSP-150
150W Single Output with PFC Function
series
Features :
Universal AC input / Full range
Withstand 300VAC surge input for 5 seconds
Built-in active PFC function
High efficiency up to 90%
Low leakage current<0.5mA
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection for 150W
and 200W with 30CFM forced air
Low profile:32mm
Conformal coated
ZVS technology to reduce power dissipation
Built-in remote sense
LED indicator for power on
3 years warranty
SPECIFICATION
HSP-150-2.5
HSP-150-3.8
HSP-150-5
DC VOLTAGE
2.5V
3.8V
5V
RATED CURRENT
30A
30A
30A
CURRENT RANGE(convection)
0 ~ 30A
0 ~ 30A
0 ~ 30A
MODEL
OUTPUT
PEAK CURRENT RANGE(30CFM FAN) 0 ~ 40A
RATED POWER(convection)
75W
PEAK POWER(30CFM FAN)
100W
RIPPLE & NOISE (max.) Note.2 80mVp-p
0 ~ 40A
0 ~ 40A
114W
152W
100mVp-p
150W
200W
100mVp-p
VOLTAGE ADJ. RANGE
3.4~4.2V
4.5~5.5V
VOLTAGE TOLERANCE Note.3
2.0%
2.0%
2.0%
LINE REGULATION
0.5%
0.5%
0.5%
1.0%
3000ms, 100ms/115VAC at full load
1.0%
2.35~2.75V
LOAD REGULATION
1.0%
2000ms, 100ms/230VAC
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
16ms/230VAC
Note.4 90 ~ 264VAC
FREQUENCY RANGE
POWER FACTOR (Typ.)
INPUT
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
47 ~ 63Hz
PF 0.95/230VAC
16ms/115VAC at full load
127 ~ 370VDC
PF
0.98/115VAC at full load
90%
88%
86%
0.8A/115VAC
0.4A/230VAC
Cold start 70A/230VAC
1.2A/115VAC
0.6A/230VAC
1.5A/115VAC
0.8A/230VAC
<0.5mA / 240VAC
140~180% rated output power
OVERLOAD
PROTECTION
SHORT CIRCUIT
OVER VOLTAGE
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed
4.7 ~ 5.7V
3.2 ~ 3.7V
5.7 ~ 7.0V
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE
110
5 (TSW1)
115
Protection type : Hiccup mode, recovers automatically after fault condition is removed
WORKING TEMP.
-30 ~ +70
5
(TSW1)
(Refer to "Derating Curve")
20 ~ 90% RH non-condensing
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85 , 10 ~ 95% RH
0.03%/ (0 ~ 60
TEMP. COEFFICIENT
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
VIBRATION
SAFETY &
EMC
(Note 5)
SAFETY STANDARDS
WITHSTAND VOLTAGE
UL60950-1,EN60950-1 approved
ISOLATION RESISTANCE
EMC EMISSION
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25 / 70%RH
Compliance to EN55022 (CISPR22) Class B,EN61000-3-2,EN61000-3-3
Compliance to EN61000-4-2,3,4,5,6,8,11;EN55024, light industry level (surge 4KV), criteria A
EMC IMMUNITY
MTBF
OTHERS
NOTE
DIMENSION
PACKING
I/P-O/P:3.0KVAC
I/P-FG:1.5KVAC
O/P-FG:0.5KVAC
263.2K hrs min. MIL-HDBK-217F (25
220*62*32mm (L*W*H)
)
0.61kg; 24pcs/15.6kg/1.63CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : line regulation and load regulation.
4. Derating may be needed under low input voltages. Please check the static characteristics for more details.
5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name:HSP-150-SPEC 2012-03-07
HSP-150
150W Single Output with PFC Function
Mechanical Specification
CASE NO.:208A
220
series
Unit:mm
32
SVR1
1
2
50mm
30CFM
3.3
216
2
AC Input Terminal(TB1) pin NO. Assignment
Pin No.
1
2
3
Assignment
AC/L
AC/N
FG
7.75
FAN
3
2
1
LED
47
62
Air flow
direction
Vo
1
ADJ
2
CN1
TB1
Remote sense pin(CN1):JS-1001-02 or equivalent
Pin No.
1
2
Terminal
T21-BM10-03
Assignment
-S
+S
Mating Housing
Terminal
JS-2001-02
or equivalent
JS-1001-02
or equivalent
DC Output Terminal pin NO. Assignment
Pin No.
1
2
Assignment
-V
+V
Terminal
CPB-7 M5
Block Diagram
+S
EMI
FILTER
I/P
BRIDGE
RECTIFIERS
APFC
CONTROLLER
POWER
SWITCHING
SYNCHRONOUS
RECTIFIERS
& FILTER
+V
-V
-S
O.T.P.
FG
O.L.P.
DETECTION
CIRCUIT
PWM
CONVERTER
O.V.P.
Derating Curve
Static Characteristics
fosc=90Khz
40
40
35
2.5
With fan
25
V
Without fan
20
14
-30
3.8
With fan
2.5V&3.8V
32
30
Io(A)
Io(A)
30
V&
24
20
Without fan
5V
5V
10
0
10
20
30
40
50
AMBIENT TEMPERATURE ( )
60
70 (HORIZONTAL)
90
100
110
135
155
230
264
INPUT VOLTAGE (V) 60Hz
File Name:HSP-150-SPEC 2012-03-07
Similar pages