Hittite HMC849LP4CE High isolation spdt non-reflective switch, dc - 6 ghz Datasheet

HMC849LP4CE
v01.1009
HIGH ISOLATION SPDT
NON-REFLECTIVE SWITCH, DC - 6 GHz
Typical Applications
Features
The HMC849LP4CE is ideal for:
High Isolation: up to 60 dB
• Cellular/4G Infrastructure
Single Positive Control: 0/+3V to +5V
• WiMAX, WiBro & Fixed Wireless
High Input IP3: +52 dBm
• Automotive Telematics
Non-Reflective Design
• Mobile Radio
“All Off” State
• Test Equipment
24 Lead 4x4 mm QFN Package: 16 mm2
Functional Diagram
General Description
The HMC849LP4CE is a high isolation non-reflective DC to 6 GHz GaAs pHEMT SPDT switch in a low
cost leadless surface mount package. The switch is
ideal for cellular/WiMAX/4G Infrastructure applications yielding up to 60 dB isolation, low 0.8 dB insertion loss and +52 dBm input IP3. Power handling
is excellent up through the 5 - 6 GHz WiMAX band
with the switch offering a P1dB compression point of
+31 dBm. On-chip circuitry allows a single positive
voltage control of 0/+3V or 0/+5V at very low DC
currents. An enable input (EN) set to logic high will put
the switch in an “all off” state.
SWITCHES - SPDT - SMT
14
Electrical Specifi cations, TA = +25 °C, Vctl = 0/Vdd, Vdd = +3V to +5V, 50 Ohm System
Parameter
Frequency
Insertion Loss
DC - 2.0 GHz
2.0 - 4.0 GHz
4.0 - 6.0 GHz
Isolation (RFC to RF1/RF2)
DC - 2.0 GHz
2.0 - 4.0 GHz
4.0 - 6.0 GHz
Return Loss (On State)
DC - 4.0 GHz
4.0 - 6.0 GHz
Return Loss (Off State)
Min.
53
48
40
DC - 6.0 GHz
Input Power for 1 dB Compression
+3V
+5V
Input Third Order Intercept
(Two-Tone Input Power = +7 dBm Each Tone)
Typ.
Max.
Units
0.8
1.0
1.7
1.3
1.5
2.5
dB
dB
60
55
52
dB
dB
17
13
dB
dB
15
dB
30
35
dBm
dBm
DC - 6.0 GHz
52
dBm
DC - 4.0 GHz
80
150
ns
ns
0.35 - 4.0 GHz
29
34
Switching Speed
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
14 - 212
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC849LP4CE
v01.1009
HIGH ISOLATION SPDT
NON-REFLECTIVE SWITCH, DC - 6 GHz
Return Loss [1]
Insertion Loss
0
-5
-1
RETURN LOSS (dB)
-2
-3
+25C
+85C
-40C
-4
RFC
RF1, RF2 ON
RF1, RF2 OFF
-10
-15
-20
-25
-5
-30
0
1
2
3
4
5
6
7
0
1
2
FREQUENCY (GHz)
Isolation Between
Ports RFC and RF1 / RF2
0
-10
-10
ISOLATION (dB)
ISOLATION (dB)
5
6
7
14
RFC-RF1 ON
RFC-RF2 ON
-20
RF1
RF2
ALL OFF
-30
4
Isolation Between Ports RF1 and RF2
0
-20
3
FREQUENCY (GHz)
-40
-50
-30
-40
-50
-60
-60
-70
-70
-80
-80
0
1
2
3
4
5
6
0
7
1
2
3
4
5
6
7
FREQUENCY (GHz)
FREQUENCY (GHz)
0.1 and 1 dB Input Compression
Point, Vdd = 5V, Linear
0.1 and 1 dB Input Compression
Point, Vdd = 3V, Linear
INPUT COMPRESSION (dBm)
INPUT COMPRESSION (dBm)
40
35
30
0.1 dB Compression Point
1dB Compression Point
25
20
30
SWITCHES - SPDT - SMT
INSERTION LOSS (dB)
0
25
0.1 dB Compression Point
1 dB Compression Point
20
15
15
0
1
2
3
4
FREQUENCY (GHz)
5
6
0
1
2
3
4
5
6
FREQUENCY (GHz)
[1] RFC is reflective in “all off” state.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
14 - 213
HMC849LP4CE
v01.1009
HIGH ISOLATION SPDT
NON-REFLECTIVE SWITCH, DC - 6 GHz
0.1 and 1 dB Input Compression
Point, Vdd = 5V
0.1 and 1 dB Input Compression
Point, Vdd = 3V
35
INPUT COMPRESSION (dBm)
INPUT COMPRESSION (dBm)
40
0.1 dB Compression Point
1 dB Compression Point
35
30
25
20
15
0.01
0.1
0.1 dB Compression Point
1 dB Compression Point
30
25
20
15
0.01
1
0.1
FREQUENCY (GHz)
60
60
55
55
50
+25C
+85C
-40C
45
50
+25C
+85C
-40C
45
40
40
0
1
2
3
4
5
6
0
1
2
3
4
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Third Order Intercept
Point, Vdd = 5V
Input Third Order Intercept
Point, Vdd = 3V
60
55
55
IP3 (dBm)
60
50
+25C
+85C
-40C
45
40
0.01
0.1
FREQUENCY (GHz)
14 - 214
Input Third Order Intercept
Point, Vdd = 3V, Linear
IP3 (dBm)
IP3 (dBm)
Input Third Order Intercept
Point, Vdd = 5V, Linear
IP3 (dBm)
SWITCHES - SPDT - SMT
14
1
FREQUENCY (GHz)
6
50
+25C
+85C
-40C
45
1
5
40
0.01
0.1
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1
HMC849LP4CE
v01.1009
HIGH ISOLATION SPDT
NON-REFLECTIVE SWITCH, DC - 6 GHz
Absolute Maximum Ratings
Bias Voltage & Current
Bias Voltage (Vdd)
7V
Control Voltage (Vctl, EN)
-1V to Vdd +1V
RF Input Power *
Through Path 3V/5V
Termination Path 3V/5V
Channel Temperature
30.60 / 33 dBm
26.4 dBm
Vdd
(V)
Idd (Typ.)
(mA)
3
0.80
5
0.85
150 °C
Continuous Pdiss (T = 85 °C)
(derate 17.6 mW/°C for through path, and
6.8 mW/°C for termination path above 85 °C)
Through Path
Termination Path
Digital Control Voltages
1.144 W
0.441 W
State
Bias Condition
Low
0 to +0.8 Vdc @ <1 μA Typical
High
+2.0 to +5.0 Vdc @ 30 μA Typical
Thermal Resistance
(channel to package bottom)
56.8 °C/W
147.3 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
Truth Table
Control Input
* The RF input power is quite lower than the breakdown
power levels. Hence, the only concern with this product
is the thermal limit.
Signal Path State
Vctl
EN
RFC - RF1
RFC - RF2
Low
Low
OFF
ON
High
Low
ON
OFF
Low
High
OFF
OFF
High
High
OFF
OFF
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
14
SWITCHES - SPDT - SMT
Through Path
Termination Path
14 - 215
HMC849LP4CE
v01.1009
HIGH ISOLATION SPDT
NON-REFLECTIVE SWITCH, DC - 6 GHz
Outline Drawing
SWITCHES - SPDT - SMT
14
14 - 216
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
HMC849LP4CE
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL Rating
MSL1
[2]
Package Marking [1]
H849
XXXX
[1] 4-Digit lot number XXXX
[2] Max peak reflow temperature of 260 °C
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC849LP4CE
v01.1009
HIGH ISOLATION SPDT
NON-REFLECTIVE SWITCH, DC - 6 GHz
Pin Descriptions
Function
Description
1
Vdd
Supply Voltage.
2
Vctl
Control input. See truth and control voltage tables.
3, 9, 12
RFC, RF1, RF2
These pins are DC coupled and matched to 50 Ohms.
Blocking capacitors are required.
4, 6, 7, 8,
13, 14, 15, 16
N/C
The pins are not connected internally; however, all
data shown herein was measured with these pins
connected to RF/DC ground externally.
5
EN
Enable. See truth and control voltage tables.
10, 11
GND
Package bottom must also be
connected to PCB RF ground.
Interface Schematic
Application Circuit
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
14
SWITCHES - SPDT - SMT
Pin Number
14 - 217
HMC849LP4CE
v01.1009
HIGH ISOLATION SPDT
NON-REFLECTIVE SWITCH, DC - 6 GHz
Evaluation PCB
SWITCHES - SPDT - SMT
14
List of Materials for Evaluation PCB 106975 [1]
Item
Description
J1 - J3
PC Mount SMA RF Connector
J4 - J8
DC Pin
C1 - C4
100 pF Capacitor, 0402 Pkg.
U1
HMC849LP4CE SPDT Switch
PCB [2]
106965 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25FR
14 - 218
The circuit board used in the final application
should be generated with proper RF circuit design
techniques. Signal lines at the RF port should have
50 Ohm impedance and the package ground leads
and backside ground slug should be connected
directly to the ground plane similar to that shown
above. The evaluation circuit board shown above is
available from Hittite Microwave Corporation upon
request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC849LP4CE
v01.1009
HIGH ISOLATION SPDT
NON-REFLECTIVE SWITCH, DC - 6 GHz
Notes:
SWITCHES - SPDT - SMT
14
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
14 - 219
Similar pages