Marktech CCCCC-DXN-XHHKKMN4 Creeâ® p4 led Datasheet

Cree® P4 LED
CP42B-RKS/AKS
Data Sheet
This revolutionary package design allows the lighting designer to reduce the number of
LEDs required and provide a more uniform and unique illuminated appearance than with
other LED solutions.
This is possible through the efficient optical package design and high current capabilities.
The low profile package can be easily coupled with reflectors or lenses to efficiently distribute
light and provide the desired lit appearance. This product family employs green and blue
LED materials, which allow designers to match the color of many lighting applications like
vehicle signal lamps and amusement lighting.
FEATURES
APPLICATIONS
• Size (mm): 7.6 x 7.6
• Channel Letter
• Color and Typical Dominant Wavelength (nm):
Red (624)
Amber (591)
• Amusement
• Luminous Flux (mlm)
Red (4400 - 11000)
Amber (5500 - 13200)
• Lead-Free
1
D-CT1133.00
Data Sheet: CL
• RoHS Compliant
Subject to change without notice.
www.cree.com/ledlamps
1
Absolute Maximum Ratings (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Unit
Red/Amber
Forward Current
Peak Forward Current
IF
70
mA
Note1
IFP
200
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
210
mW
Operation Temperature
Topr
-40 ~ +100
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Lead Soldering Temperature
Tsol
Max. 260°C for 5 sec. max.
(3 mm from the base of the epoxy bulb)
ESD
Class 2
Note2
Electrostatic Discharge
Classification (MIL-STD-883E)
Note:
1. A heat sink is recommended if the device is operated at ambient temperatures higher than 25°C.
2. Pulse width ≤0.1 msec, duty ≤1/10.
Typical Electrical & Optical Characteristics (TA = 25°C)
Characteristics
Color
Symbol
Condition
Unit
Typical
Red/Amber
VF
IF = 70 mA
V
Reverse Current
Red/Amber
IR
VR = 5 V
μA
Red
λD
IF = 70 mA
nm
618
624
630
Amber
λD
IF = 70 mA
nm
584
591
599
Luminous Flux
50% Power Angle
3.0
100
Red
Φv
IF = 70 mA
mlm
4400
6000
Amber
Φv
IF = 70 mA
mlm
5500
7000
Red/Amber
2θ½
IF = 70 mA
deg
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
CLD-CT1133.001
2.5
Maximum
Forward Voltage
Dominant Wavelength
2
Minimum
120
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Flux Bin Limit (IF = 70 mA)
Red
Amber
Bin Code
Min.(mlm)
Max.(mlm)
Bin Code
Min.(mlm)
Max.(mlm)
L0
4400
5500
M0
5500
6600
M0
5500
6600
N0
6600
8730
N0
6600
8730
P0
8730
11000
P0
8730
11000
Q0
11000
13200
• Tolerance of measurement of luminous flux is ±15%
Color Bin Limit (IF = 70 mA)
Red
Amber
Bin Code
Min.(nm)
Max.(nm)
Bin Code
Min.(nm)
Max.(nm)
RA
618
630
A2
584
587
A3
587
590
A4
590
593
A5
593
596
A6
596
599
• Tolerance of measurement of dominant wavelength is ±1 nm
VF Bin Limit (IF = 70 mA)
Red Amber Bin Code
Min.(V)
Max.(V)
Bin Code
Min.(V)
Max.(V)
23
2.0
2.2
23
2.0
2.2
24
2.2
2.4
24
2.2
2.4
25
2.4
2.6
25
2.4
2.6
26
2.6
2.8
26
2.6
2.8
27
2.8
3.0
27
2.8
3.0
• Tolerance of measurement of VF is ± 0.05V
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
3
CLD-CT1133.001
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Order Code Table*
Luminous Flux (mlm)
Kit Number
Viewing
Angle
Red
CP42B-RKS-CL0P0AA4
Red
CP42B-RKS-CM0P0AA4
Color
Kit Number
Viewing
Angle
Min.
Amber
CP42B-AKS-CM0Q0264
120
Amber
CP42B-AKS-CN0Q0354
120
Color
Dominant Wavelength
Min.
Max.
Color
Bin
120
4400
11000
RA
618
RA
630
120
5500
11000
RA
618
RA
630
Luminous Flux (mlm)
Min.
(nm)
Color
Bin
Max.
(nm)
Dominant Wavelength
Max.
Color
Bin
Min.
(nm)
Color
Bin
Max.
(nm)
5500
13200
A2
584
A6
599
6600
13200
A3
587
A5
596
Notes:
1. The above kit numbers represent order codes which include multiple flux-bin and color-bin codes.
Only one flux-bin code and one color-bin code will be shipped on each reel.
And single flux-bin code,single color bin-codes will not be orderable.
2. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
3. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
4
CLD-CT1133.001
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Graphs

































































 





































The above data are collected from statistical figures that do not necessarily correspond to the actual
parameters of each single LED. Hence, these data will be changed without further notice.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
5
CLD-CT1133.001
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Mechanical Dimensions
All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted.
An epoxy meniscus may extend about 1.5 mm down the leads.
Burr around bottom of epoxy may be 0.5 mm max.

Notes
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the
threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(RoHS), as amended through April 21, 2006.
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
6
CLD-CT1133.001
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage,
and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED
Lamp Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following
manner:
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
7
CLD-CT1133.001
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Package
Features:
•
•
•
•
•
The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
Cardboard boxes will be used to protect the LEDs from mechanical shock during transportation.
The boxes are not water resistant, and they must be kept away from water and moisture.
The Tube Pack type of packaging.
Max 60 pcs per tube.
R
xxx xxx
R
C OL OR LED LAMP
T YPE
LXXXXXXXX-XXX
LOT
J OWAXXXXX -XX-XXX
QT Y
RANK
P CS
Iv
Vf
Hu e
X
XX
XX
AX XXX XXX XXX X
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
8
CLD-CT1133.001
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Similar pages