BUX85G Switch‐mode NPN Silicon Power Transistors The BUX85G is designed for high voltage, high speed power switching applications like converters, inverters, switching regulators, motor control systems. www.onsemi.com Features • These Devices are Pb−Free and are RoHS Compliant* MAXIMUM RATINGS Rating Symbol Value Unit Collector−Emitter Voltage VCEO(sus) 450 Vdc Collector−Emitter Voltage VCES 1000 Vdc Emitter−Base Voltage VEBO 5 Vdc IC 2 Adc ICM 3.0 Adc IB 0.75 Adc IBM 1.0 Adc Reverse Base Current − Peak IBM 1 Adc Total Device Dissipation @ TC = 25_C Derate above 25°C PD 50 0.4 W W/_C TJ, Tstg −65 to +150 _C Collector Current − Continuous Collector Current − Peak (Note 1) Base Current − Continuous Base Current − Peak (Note 1) Operating and Storage Junction Temperature Range Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Pulse Test: Pulse Width = 5 ms, Duty Cycle ≤ 10%. 2.0 AMPERES POWER TRANSISTOR NPN SILICON 450 VOLTS, 50 WATTS COLLECTOR 2,4 1 BASE 3 EMITTER 4 TO−220 CASE 221A STYLE 1 1 THERMAL CHARACTERISTICS Characteristics 2 3 MARKING DIAGRAM Symbol Max Unit Thermal Resistance, Junction−to−Case RqJC 2.5 _C/W Thermal Resistance, Junction−to−Ambient RqJA 62.5 _C/W Maximum Lead Temperature for Soldering Purposes 1/8″ from Case for 5 Seconds TL 275 _C BUX85G AY WW BUX85 A Y WW G = Device Code = Assembly Location = Year = Work Week = Pb−Free Package ORDERING INFORMATION *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2015 March, 2015 − Rev. 18 1 Device Package Shipping BUX85G TO−220 (Pb−Free) 50 Units / Rail Publication Order Number: BUX85/D BUX85G ELECTRICAL CHARACTERISTICS (TC = 25_C unless otherwise noted) Characteristic Symbol Min Typ Max Unit VCEO(sus) 450 − − Vdc − − − − 0.2 1.5 OFF CHARACTERISTICS (Note 2) Collector−Emitter Sustaining Voltage (IC = 100 mAdc, (L = 25 mH) See Figure 1 Collector Cutoff Current (VCES = Rated Value) (VCES = Rated Value, TC = 125_C) ICES mAdc Emitter Cutoff Current (VEB = 5 Vdc, IC = 0) IEBO − − 1 mAdc hFE 30 50 − − − − − − 0.8 1 ON CHARACTERISTICS (Note 2) DC Current Gain (IC = 0.1 Adc, VCE = 5 V) Collector−Emitter Saturation Voltage (IC = 0.3 Adc, IB = 30 mAdc) (IC = 1 Adc, IB = 200 mAdc) VCE(sat) Vdc Base−Emitter Saturation Voltage (IC = 1 Adc, IB = 0.2 Adc) VBE(sat) − − 1.1 Vdc fT 4 − − MHz ton − 0.3 0.5 ms ts − 2 3.5 ms tf − 0.3 − ms tf − − 1.4 ms DYNAMIC CHARACTERISTICS Current−Gain − Bandwidth Product (IC = 500 mAdc, VCE = 1 0 Vdc, f = 1 MHz) SWITCHING CHARACTERISTICS Turn−on Time Storage Time Fall Time Fall Time VCC = 250 Vdc, IC = 1 A IB1 = 0.2 A, IB2 = 0.4 A See Figure 2 Same above cond. at TC = 95_C Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. Pulse Test: PW = 300 ms, Duty Cycle ≤2%. www.onsemi.com 2 BUX85G TYPICAL CHARACTERISTICS 100 1 TJ = 25°C VCE = 5 V 150°C hFE, DC CURRENT GAIN 80 70 60 25°C 50 40 −55°C 30 20 10 0 0.001 0.01 1 0.1 IC / IB = 10 VCE(sat), COLLECTOR−EMITTER SATURATION VOLTAGE (V) 90 150°C −55°C 0.01 0.001 10 Figure 2. VCE(sat), Collector Emitter Saturation Voltage 1.0 −55°C 25°C 0.7 0.6 150°C 0.5 0.4 0.3 0.2 IC / IB = 10 0.01 VBE(on), BASE−EMITTER SATURATION VOLTAGE (V) VBE(sat), BASE−EMITTER SATURATION VOLTAGE (V) 1 Figure 1. DC Current Gain 1 0.1 0.9 −55°C 0.8 25°C 0.7 0.6 0.5 150°C 0.4 0.3 0.2 VCE = 5 V 0.1 0.001 0.01 1 0.1 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 3. VBE(sat), Base Emitter Saturation Voltage Figure 4. VBE(on), Base Emitter On Voltage 60 PD, POWER DISSIPATION (W) 10 IC, COLLECTOR CURRENT (A) 0.1 IC, COLLECTOR CURRENT (A) 0.8 0.1 0.001 0.01 IC, COLLECTOR CURRENT (A) 1.0 0.9 25°C 0.1 10 ms 1 100 ms 1s 0.1 0.01 1 10 100 50 40 30 20 10 0 1000 0 25 50 75 100 VCE, COLLECTOR−EMITTER VOLTAGE (V) TC, CASE TEMPERATURE (°C) Figure 5. Safe Operating Area (SOA) Figure 6. Power Derating www.onsemi.com 3 125 150 BUX85G +6 V L 250 HOR OSCILLOSCOPE 250 IC (mA) 100 VERT ~ 30-60 Hz 4V 0 + 100 W MIN VCEOsust VCEO (V) 1W Figure 1. Test Circuit for VCEOsust tr ≤ 30 ns IBon 90 IB % 10 t IBoff WAVEFORM ICon 90 IC % 10 0 t tf ts ton +25 V BD139 680 mF 250 W 200 W 100 mF T 100 W T.U.T. VIM 30 W tm VI 100 W 50 W BD140 Figure 2. Switching Times/Test Circuit www.onsemi.com 4 680 mF VCC 250 V BUX85G PACKAGE DIMENSIONS TO−220 CASE 221A−09 ISSUE AH −T− B SEATING PLANE C F T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q 1 2 3 U H K Z L R V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. J G D INCHES MIN MAX 0.570 0.620 0.380 0.415 0.160 0.190 0.025 0.038 0.142 0.161 0.095 0.105 0.110 0.161 0.014 0.024 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ----0.080 MILLIMETERS MIN MAX 14.48 15.75 9.66 10.53 4.07 4.83 0.64 0.96 3.61 4.09 2.42 2.66 2.80 4.10 0.36 0.61 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ----2.04 N STYLE 1: PIN 1. 2. 3. 4. BASE COLLECTOR EMITTER COLLECTOR ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative BUX85/D