RCD OA2AS2720-R100 Open-air low value current shunt resistors 0.001î© to 0.15î©, 1 watt to 5 watt Datasheet

OPEN-AIR LOW VALUE CURRENT SHUNT RESISTORS
0.001Ω to 0.15Ω, 1 WATT to 5 WATT
OA SERIES
RoHS
RESISTORSCAPACITORSCOILSDELAY LINES
New narrow profile design
offers significant space
savings!
Term.W is
RoHS
compliant
& 260°C
compatible
Industry’s widest range and lowest cost!
Tolerances to ±0.5%, TC’s to ±20ppm
Available on exclusive SWIFT TM delivery program!
Option S: Axial lead (unformed element)
Option E: Low Thermal EMF
Option A: Stand-offs formed into lead wires
Optional pin diameters and pin spacing
RCD’s OA series offers cost-effective performance for a wide range of
current shunt/sense applications. The non-insulated open-air design
features non-inductive performance and excellent stability/overload capacity.
Numerous design modifications and cutom styles are available...
current ratings up to 100A, surface mount designs, military screening/
burn-in, marking, insulation, intermediate values, etc. Custom shunts
have been an RCD specialty over 30 years! Contact factory for assistance.
Option ‘A’ Stand-offs:
B2
.125±.062
[3.2± 1.6]
Typical*
.150”
Min.
A
For stand-off, specify Opt. A
(e.g. OA2BA, OA5AA). Resis. value
is measured at bottom of stand-off.
Solderable to within
.062” [1.57] of element.
Resis. value measured
.062” [1.57] from element.
Stand-off
width = C+.01”
[.25] min
.11±.04
[2.8±1]
.15 [3.8]
min.
A
C
Typical shape depicted--actual shape may vary within envelope given.
Overall length not to exceed Dim.A +.12” [3]. Dimensions in inches [mm].
* Most values are .125 [3.2] wide, lowest 2W-5W are .187 [4.75] wide,
highest 1W-2W values are .062 [1.6] wide
D
Note 1
Note 1
Note 1: resis.
value is tested
3/8” from body
Option ‘S’ Straight Axial Lead Design (lead length = 1.25” [31.8] min)
SPECIFICATIONS
R C D P o w er
Current Rating1
Resistance A (lead spacing) ±.040 [1]
B Max.2
Type Rating1 With Std.Lead With Opt. Lead
R an g e
Standard
Optional2
1W
14A
17A
.001Ω-.08Ω
.40 [10.5] .2"[5], .275" [7] .35 [8.9]2
20AWG
18AWG (Opt. 18) 1.20 [30.5]
OA1B
1W
17A
14A
.001Ω-.08Ω
.45 [11.4] .2"[5], .275" [7] .30 [7.6]2
18AWG
20AWG (Opt .20) 1.20 [30.5]
OA2A
2W
22A
24A
.001Ω-.1Ω
.40 [10.5] .2"[5], .275" [7] .70 [17.8]2
20AWG
18AWG (Opt. 18) 1.95 [49.5]
OA2B
2W
24A
22A
.001Ω-.1Ω
.60 [15.2] .2"[5], .275" [7] .60 [15.2]2
18AWG
20AWG (Opt .20) 1.95 [49.5]
24A
.001Ω-.12Ω
2
.60 [15.2] .2"[5], .275" [7] .90 [22.9]
18AWG
20AWG (Opt .20) 2.50 [63.5]
40A
.0025Ω-.15Ω .80 [20.3] .2"[5], .275" [7] 1.0 [25.4]
18AWG
16AWG (Opt. 16) 2.94 [74.7]
OA5A
2
D Max.
OA1A
OA3A
1
C (lead diameter)
Standard
Optional
3W
5W
26A
32A
2
Units not to exceed wattage or current rating, whichever is less. Current rating is based on standard lead diameter, increased ratings available.
Dim.B applies only to parts formed to the standard lead spacing (increase accordingly for options 80 & 27). Custom pin spacings are available.
STANDARD RESISTANCE VALUES AND CODES
Intermediate values available, most popular values listed in bold:
.001Ω (R001), .0015Ω (R0015), .002Ω (R002), .0025Ω (R0025), .003Ω(R003),
Ω (R005), .0068Ω (R0068), .0075Ω (R0075), .0082Ω (R0082), .01Ω
Ω (R010 if
.005Ω
Ω (R015), .02Ω
Ω(R020 if ≤1%, R02≥
≥2%),
≤1%,R01 ≥2%), .012Ω (R012), .015Ω
Ω (R025), .03Ω
Ω (R030 if ≤1%, R03 ≥2%), .033Ω (R033),
.022Ω (R022), .025Ω
Ω (R040 if≤
≤ 1%, R04 ≥2%), .05Ω
Ω (R050≤
≤1%, R05≥
≥2%), .068Ω(R068),
.04Ω
Ω (R070 if ≤1%, R07 ≥2%), .075Ω (R075), .08Ω
Ω (R080 if≤
≤1%, R08 ≥2%),
.07Ω
Ω (R100 if≤
≤1%, R10 ≥2%).
.1Ω
.001 to .0049Ω
(OA5A=.0025 to .005Ω)
.005 to .0099Ω
(OA5A=.006 to .015Ω)
.010 to .024Ω (OA5A=.016
to .025Ω)
.025 to .049Ω
.05 to .10Ω
Tol. Range
TEMPERATURE RANGE: -55 to +275°C
DERATING: derate power & current rating by 0.4%/°C above 25°C
OVERLOAD: 5 x rated power for 5 seconds
LOAD LIFE @ 25°C (1000 hrs): 1%∆R
MOISTURE No Load (1000 hrs): 1% ∆R
INDUCTANCE: <10nH
TEMP. CYCLING -40°C to+125°C (1000 cycles): 1% ∆R
P/N DESIGNATION: OA2A
TOLERANCE AND T.C. OPTIONS
Resistance Range
TYPICAL OPERATING CHARACTERISTICS:
Temp. Coef. (ppm/°C)
Typical
Best Avail.*
3% to 10%
900ppm
200ppm
1% to 10%
600ppm
100ppm
1% to 10%
200ppm
50ppm
1% to 10%
1% to 10%
100ppm
50ppm
30ppm
20ppm
* TC options vary depending on size and value (consult factory for availability)
- R001 - J B
W
RCD Type
Design Options: S=unformed, E= low
thermal EMF, A=standoffs. Leave blank if std.
Lead Spacing Option: 80=.2” [5mm],
27=.275”[7mm]. Leave blank if std.
Lead Diameter Option: 20=20AWG, 18=18AWG,
16=16AWG. Leave blank if standard.
Resis.Code (see table): R01, R010, R100, etc.
Tolerance Code: D=0.5%, F=1%, G=2%, H=3%,J=5%, K=10%
Packaging: B = bulk (standard)
TC (see table for options): 20=20ppm, 30=30ppm, 50=50ppm, 101=100ppm,
201=200ppm, 301=300ppm. (leave blank if standard)
Termination: W=Lead-free, Q=Tin/Lead (leave blank if either is acceptable)
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:[email protected]
FA007D
Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
56
Similar pages