Vishay MBR30H45PT Dual common cathode schottky rectifier Datasheet

MBR30H35PT, MBR30H45PT, MBR30H50PT, MBR30H60PT
www.vishay.com
Vishay General Semiconductor
Dual Common Cathode Schottky Rectifier
High Barrier Technology for Improved High Temperature Performance
FEATURES
• Power pack
• Guardring for overvoltage protection
• Lower power losses, high efficiency
• Low forward voltage drop
• Low leakage current
• High forward surge capability
3
• High frequency operation
2
1
• Solder dip 275 °C max.10 s, per JESD 22-B106
TO-247AD (TO-3P)
PIN 1
PIN 2
PIN 3
CASE
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in low voltage, high frequency rectifier of switching
mode power supplies, freewheeling diodes, DC/DC
converters, or polarity protection application.
PRIMARY CHARACTERISTICS
MECHANICAL DATA
IF(AV)
30 A
VRRM
35 V, 45 V, 50 V, 60 V
IFSM
200 A
VF
0.58 V, 0.63 V
IR
150 μA
TJ max.
175 °C
Package
TO-247AD
Diode variations
Dual Common Cathode
Case: TO-247AD (TO-3P)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Terminals: Matte tin plated leads, solderable
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
per
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL MBR30H35PT MBR30H45PT MBR30H50PT MBR30H60PT UNIT
Maximum repetitive peak reverse voltage
VRRM
35
45
50
60
V
Maximum working peak reverse voltage
VRWM
35
45
50
60
V
Maximum DC blocking voltage
VDC
35
45
50
60
V
Maximum average forward rectified current (fig. 1)
IF(AV)
30
A
Non-repetitive avalanche energy per diode at 25 °C,
IAS = 1.5 A, L = 10 mH
EAS
80
mJ
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load per diode
IFSM
200
A
IRRM (1)
2.0
1.0
A
Peak non-repetitive reverse energy (8/20 μs waveform)
ERSM
30
20
mJ
Electrostatic discharge capacitor voltage human body
model: C = 100 pF, R = 1.5 
VC
Peak repetitive reverse surge current per diode
Voltage rate of change (rated VR)
Operating junction temperature range
Storage temperature range
mJ
dV/dt
10 000
V/μs
TJ
- 65 to + 175
°C
TSTG
- 65 to + 175
°C
Note
(1) 2.0 μs pulse width, f = 1.0 kHz
Revision: 13-Aug-13
Document Number: 88792
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBR30H35PT, MBR30H45PT, MBR30H50PT, MBR30H60PT
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Maximum instantaneous forward voltage
per diode
VF (1)
Maximum reverse current at rated VR 
per diode
MBR30H35PT
MBR30H45PT
TEST CONDITIONS
TYP.
MAX.
MBR30H50PT
MBR30H60PT
UNIT
TYP.
MAX.
IF = 20 A
TJ = 25 °C
-
0.66
-
0.74
IF = 20 A
TJ = 125 °C
0.54
0.58
0.60
0.63
IF = 30 A
TJ = 25 °C
-
0.73
-
0.83
IF = 30 A
TJ = 125 °C
0.62
0.66
0.66
0.70
TJ = 25 °C
-
150
-
150
μA
TJ = 125 °C
6.0
25
4.0
25
mA
IR (2)
V
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width  40 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Thermal resistance, junction to case 
per diode
MBR30H35PT
MBR30H45PT
RJC
MBR30H50PT
MBR30H60PT
1.4
UNIT
°C/W
ORDERING INFORMATION (Example)
PACKAGE
PREFERRED P/N
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
TO-247AD
MBR30H45PT-E3/45
6.13
45
30/tube
Tube
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
250
Peak Forward Surge Current (A)
Average Forward Current (A)
40
30
20
10
0
TJ = TJ Max.
8.3 ms Single Half Sine-Wave
200
150
100
50
0
0
25
50
75
100
125
150
175
1
10
100
Case Temperature (°C)
Number of Cycles at 60 Hz
Fig. 1 - Forward Current Derating Curve
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
Per Diode
Revision: 13-Aug-13
Document Number: 88792
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBR30H35PT, MBR30H45PT, MBR30H50PT, MBR30H60PT
www.vishay.com
Vishay General Semiconductor
10 000
Junction Capacitance (pF)
Instantaneous Forward Current (A)
100
10
TJ = 150 °C
TJ = 25 °C
1
TJ = 125 °C
0.1
MBR30H35PT, MBR30H45PT
MBR30H50PT, MBR30H60PT
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1000
100
0.01
0
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
0.1
1.0
1
10
100
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics Per Diode
Fig. 5 - Typical Junction Capacitance Per Diode
10
Transient Thermal Impedance (°C/W)
Instantaneous Reverse Leakage
Current (mA)
100
TJ = 150 °C
10
1
TJ = 125 °C
0.1
MBR30H35PT, MBR30H45PT
MBR30H50PT, MBR30H60PT
0.01
0.001
TJ = 25 °C
1
0.0001
0
20
40
60
80
0.1
0.01
100
0.1
1
10
t - Pulse Duration (s)
Percent of Rated Peak Reverse Voltage (%)
Fig. 4 - Typical Reverse Characteristics Per Diode
Fig. 6 - Typical Transient Thermal Impedance Per Diode
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-247AD (TO-3P)
0.645 (16.4)
0.625 (15.9)
0.245 (6.2)
0.225 (5.7)
0.323 (8.2)
0.313 (7.9)
0.203 (5.16)
0.193 (4.90)
30°
0.078 (1.98) REF.
10
0.170
(4.3)
0.840 (21.3)
0.142 (3.6)
0.138 (3.5)
0.820 (20.8)
1
2
10° TYP.
Both Sides
3
1° REF.
Both Sides
0.086 (2.18)
0.076 (1.93)
0.127 (3.22)
0.160 (4.1)
0.140 (3.5)
0.117 (2.97)
0.118 (3.0)
0.108 (2.7)
0.795 (20.2)
0.775 (19.6)
0.048 (1.22)
0.044 (1.12)
0.225 (5.7)
0.205 (5.2)
Revision: 13-Aug-13
0.030 (0.76)
0.020 (0.51)
PIN 1
PIN 2
PIN 3
CASE
Document Number: 88792
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
MBR30H45PT-E3/45 MBR30H35PT-E3/45
Similar pages