DGNJDZ MUR4100G 4.0 amp glass passivated high efficiency rectifier Datasheet

MUR410G
THRU
MUR4100G
4.0 AMP GLASS PASSIVATED HIGH EFFICIENCY RECTIFIERS
VOLTAGE RANGE
50 to 1000 Volts
CURRENT
FEATURES
4.0 Amperes
* Low forward voltage drop
* High current capability
* High reliability
* High surge current capability
* High speed switching
DO-27
.220(5.6)
.197(5.0)
DIA.
0.945(24.0)
MIN.
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Lead: Axial leads, solderable per MIL-STD-202,
method 208 guranteed
* Polarity: Color band denotes cathode end
* Mounting position: Any
* Weight: 1.10 grams
* Both normal and Pb free product are available:
* Normal:80~95%Sn,5~20%Pb
* Pb free:99 Sn above can meet Rohs enviroment substance
directive request
.375(9.5)
.285(7.2)
0.945(24.0)
MIN.
.052(1.3)
.043(1.1)
DIA.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
MUR410G MUR420G MUR430G MUR440G MUR460G MUR480G MUR4100G UNITS
100
70
100
200
140
200
300
210
300
400
280
400
.375"(9.5mm) Lead Length at Ta=50 C
Peak Forward Surge Current, 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Maximum Instantaneous Forward Voltage at 3.0A
Maximum DC Reverse Current
Ta=25 C
800
560
800
NOTES:
1. Reverse Recovery Time test condition: IF=0.5A, IR=1.0A, IRR=0.25A
1.3
1.70
5
200
50
70
-65
75
+150
V
V
V
A
V
uA
200
1.0
1000
700
1000
A
4.0
at Rated DC Blocking Voltage
Ta=100 C
Maximum Reverse Recovery Time (Note 1)
Typical Junction Capacitance (Note 2)
Operating and Storage Temperature Range Tj, TSTG
2. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
600
420
600
uA
nS
pF
C
RATING AND CHARACTERISTIC CURVES (MUR410G THRU MUR4100G)
FIG.2-TYPICAL FORWARD CURRENT
DERATING CURVE
FIG.1-TYPICAL FORWARD
CHARACTERISTICS
G
41
00
0G
R
46
M
U
42
R
48
0G
0G
~M
U
~M
UR
41
0G
MU
R
MU
R
.1
4.0
3.5
3.0
Single Phase
2.0
Half Wave 60Hz
Resistive Or Inductive Load
1.0
0.375"(9.5mm) Lead Length
0.5
0
0
25
50
75
100
125
150
175
AMBIENT TEMPERATURE ( C)
Tj=25 C
Pulse Width 300us
1% Duty Cycle
.01
FIG.4-MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
.6
.8
1.0
1.2
1.4
1.6
1.8
FORWARD VOLTAGE,(V)
FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE
RECOVERY TIME CHARACTERISTICS
50W
NONINDUCTIVE
10W
NONINDUCTIVE
( )
(+)
D.U.T.
25Vdc
(approx.)
PULSE
GENERATOR
(NOTE 2)
( )
250
PEAK FORWARD SURGE CURRENT,(A)
.001
.4
(+)
1W
NONINDUCTIVE
200
150
8.3ms Single Half
Tj=25 C
Sine Wave
100
JEDEC method
50
0
1
OSCILLISCOPE
(NOTE 1)
5
50
10
100
NUMBER OF CYCLES AT 60Hz
NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF.
2. Rise Time= 10ns max., Source Impedance= 50 ohms.
FIG.5-TYPICAL JUNCTION CAPACITANCE
175
trr
JUNCTION CAPACITANCE,(pF)
INSTANTANEOUS FORWARD CURRENT,(A)
1.0
AVERAGE FORWARD CURRENT,(A)
10
|
|
|
|
|
|
|
|
+0.5A
0
-0.25A
-1.0A
150
125
100
75
50
25
1cm
SET TIME BASE FOR
50 / 10ns / cm
0
.01
.05
.1
.5
1
REVERSE VOLTAGE,(V)
5
10
50
100
Similar pages