Kingbright AA5060VGC 5.0x6.0mm surface mount led lamp Datasheet

5.0X6.0mm SURFACE MOUNT LED LAMP
PRELIMINARY SPEC
Part Number: AA5060VGC/A
GREEN
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Description
z SINGLE
The Green source color devices are made with InGaN on
COLOR.
z SUITABLE
FOR ALL SMT ASSEMBLY AND SOLDER
Static electricity and surge damage the LEDS.
PROCESS.
z AVAILABLE
z IDEAL
zMOISTURE
zRoHS
It is recommended to use a wrist band or
ON TAPE AND REEL.
anti-electrostatic glove when handling the LEDs.
FOR BACKLIGHTING.
z PACKAGE
G-SiC Light Emitting Diode.
: 500PCS / REEL.
All devices, equipment and machinery must be electrically
SENSITIVITY LEVEL : LEVEL 4.
grounded.
COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAG5695
REV NO: V.1
DATE: JUN/19/2006
PAGE: 1 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
ERP: 1201002111
Selection Guide
Dice
Part No.
AA5060VGC/A
Iv (mcd) [2]
@ 20mA
Lens Type
GREEN (InGaN)
WATER CLEAR
Viewing
Angle [1]
Min.
Typ.
2θ1/2
180
350
100°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous Intensity/ Luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Green
λD [1]
Dominant Wavelength
Δλ1/2
Typ.
Max.
Units
Test Conditions
520
nm
IF=20mA
Green
525
nm
IF=20mA
Spectral Line Half-width
Green
35
nm
IF=20mA
C
Capacitance
Green
100
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Green
3.2
4.0
V
IF=20mA
IR
Reverse Current
Green
10
uA
VR = 5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Green
Units
Power dissipation
200
mW
DC Forward Current
50
mA
Peak Forward Current [1]
100
mA
5
V
Reverse Voltage
Operating/Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAG5695
REV NO: V.1
DATE: JUN/19/2006
PAGE: 2 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
ERP: 1201002111
Green
AA5060VGC/A
SPEC NO: DSAG5695
REV NO: V.1
DATE: JUN/19/2006
PAGE: 3 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
ERP: 1201002111
AA5060VGC/A
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAG5695
REV NO: V.1
DATE: JUN/19/2006
PAGE: 4 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
ERP: 1201002111
PACKING & LABEL SPECIFICATIONS
AA5060VGC/A
SPEC NO: DSAG5695
REV NO: V.1
DATE: JUN/19/2006
PAGE: 5 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
ERP: 1201002111
Similar pages