Order this document by MBR2515L/D SEMICONDUCTOR TECHNICAL DATA . . . employing the Schottky Barrier principle in a large metal–to–silicon power diode. State–of–the–art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for use in low voltage, high frequency switching power supplies, low voltage converters, OR’ing diodes, and polarity protection devices. SCHOTTKY BARRIER RECTIFIER 25 AMPERES 15 VOLTS • Very Low Forward Voltage (0.28 V Maximum @ 19 Amps, 70°C) • Guardring for Stress Protection • Highly Stable Oxide Passivated Junction (100°C Operating Junction Temperature) • Epoxy Meets UL94, VO at 1/8″ Mechanical Characteristics • Case: Epoxy, Molded • Weight: 1.9 grams (approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable • Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds • Shipped 50 Units Per Plastic Tube • Marking: B2515L 4 1 1 3 4 3 CASE 221B–03, STYLE 1 (TO–220AC) MAXIMUM RATINGS (Per Leg) Rating Symbol Max Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 15 Volts Average Rectified Forward Current (Rated VR) TC = 90°C IF(AV) 25 Amps Peak Repetitive Forward Current, Per Leg (Rated VR, Square Wave, 20 kHz) TC = 90°C IFRM 30 Amps Non Repetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 150 Amps Peak Repetitive Reverse Surge Current (2.0 µs, 1.0 kHz) IRRM 1.0 Amps TJ – 65 to +100 °C Tstg – 65 to +125 °C RθJC 2.0 °C/W Operating Junction Temperature Storage Temperature THERMAL CHARACTERISTICS Thermal Resistance — Junction to Case ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (1) (IF = 25 Amps, TJ = 25°C) (IF = 25 Amps, TJ = 70°C) (IF = 19 Amps, TJ = 70°C) VF Maximum Instantaneous Reverse Current (1) (Rated DC Voltage, TJ = 25°C) (Rated DC Voltage, TJ = 70°C) IR Volts 0.45 0.42 0.28 mA 15 200 (1) Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤ 2.0%. SWITCHMODE is a trademark of Motorola Inc. This document contains information on a new product. Specifications and information herein are subject to change without notice. Device Rectifier Motorola, Inc. 1996 Data 1 MBR2515L PACKAGE DIMENSIONS C B F S T Q DIM A B C D F G H J K L Q R S T U 4 A U 1 3 H K L D G NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. R J INCHES MIN MAX 0.595 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.190 0.210 0.110 0.130 0.018 0.025 0.500 0.562 0.045 0.060 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 STYLE 1: PIN 1. 2. 3. 4. MILLIMETERS MIN MAX 15.11 15.75 9.65 10.29 4.06 4.82 0.64 0.89 3.61 3.73 4.83 5.33 2.79 3.30 0.46 0.64 12.70 14.27 1.14 1.52 2.54 3.04 2.04 2.79 1.14 1.39 5.97 6.48 0.000 1.27 CATHODE N/A ANODE CATHODE CASE 221B–03 (TO–220AC) ISSUE B Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–2447 JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 81–3–3521–8315 Mfax: [email protected] – TOUCHTONE 602–244–6609 INTERNET: http://Design–NET.com ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 2 ◊ MBR2515L/D Rectifier Device Data