Order this document by MC12033A/D The MC12033 is a high frequency low voltage dual modulus prescaler used in phase–locked loop (PLL) applications. A high frequency input signal up to 2.0 GHz is provided for cordless and cellular communication services such as DECT, PHS, and PCS. The MC12033 can be operated down to a minimum supply voltage of 2.7 V required for battery operated portable systems. The MC12033A can be used with CMOS synthesizer requiring positive edges to trigger internal counters such as Motorola’s MC145XXX series in a PLL to provide tuning signal up to 2.0 GHz in programmable frequency steps. The MC12033B can be used with CMOS synthesizers requiring negative edges to trigger internal counters. A Divide Ratio Control (SW) permits selection of a 32/33 or 64/65 divide ratio as desired. The Modulus Control (MC) selects the proper divide number after SW has been biased to select the desired divide ratio. MECL PLL COMPONENTS ÷32/33, ÷64/65 LOW VOLTAGE DUAL MODULUS PRESCALER SEMICONDUCTOR TECHNICAL DATA 8 1 NOTE: The “B” Version Is Not Recommended for New Designs • • • • • • • D SUFFIX PLASTIC PACKAGE CASE 751 (SO–8) 2.0 GHz Toggle Frequency Supply Voltage 2.7 V to 5.0 Vdc Low Power 10.0 mA Typical at VCC = 2.7 V Operating Temperature Range of –40 to 85°C The MC12033 is Pin Compatible With the MC12022 Short Setup Time (tset) 8ns Typical at 2.0 GHz Modulus Control Input Level Is Compatible With Standard CMOS and TTL 8 1 FUNCTIONAL TABLE SW MC Divide Ratio H H 32 H L 33 L H 64 L L 65 P SUFFIX PLASTIC PACKAGE CASE 626 PIN CONNECTIONS NOTES: 1. SW: H = VCC, L = Open. A logic L can also be applied by grouunding this pin, but this is not recommended due to increased power soncumption. 2. MC: H = 2.0 V to VCC, L = GND to 0.8 V. IN VCC SW OUT MAXIMUM RATINGS Parameter Symbol Value Unit VCC –0.5 to 7.0 Vdc TA –40 to 85 °C Storage Temperature Range Tstg –65 to 150 °C Modulus Control Input, Pin 6 MC –0.5 to 6.5 Vdc Maximum Output Current, Pin 4 IO 10.0 mA Power Supply Voltage, Pin 2 Operating Temperature Range NOTE: 1 8 2 7 3 6 4 5 IN NC MC Gnd (Top View) ORDERING INFORMATION Operating Temp Range Device Package ESD data available upon request. MC12033AD MC12033AP MC12033BD SO–8 TA = –40° to +85°C MC12033BP Motorola, Inc. 1997 Plastic SO–8 Plastic Rev 3 MC12033A MC12033B ELECTRICAL CHARACTERISTICS (VCC = 2.7 to 5.0 V; TA = –40 to 85°C, unless otherwise noted.) Parameter Toggle Frequency (Sine Wave) Supply Current Output (Pin 2) VCC = 2.7 V VCC = 5.0 V Symbol Min Typ Max Unit ft 0.5 2.4 2.0 GHz ICC – – 10.0 13.0 12.5 16.0 mA Modulus Control Input HIGH (MC) VIH1 2.0 – VCC V Modulus Control Input LOW (MC) VIL1 Gnd – 0.8 V Divide Ratio Control Input HIGH (SW) VIH2 VCC VCC VCC V Divide Ratio Control Input LOW (SW) VIL2 OPEN OPEN OPEN — VOUT 0.8 1.2 – Vpp CL = 8.0 pF; RL = 600 Ω Output Voltage Swing (Note 1) Modulus Setup Time MC to OUT @ 2000 MHz Input Voltage Sensitivity 500–2000 MHz Output Current (Note 2) VCC = 2.7V, CL = 8.0 pF, RL = 600 Ω VCC = 5.0 V, CL = 8.0 pF, RL = 1.5 kΩ tset – 8.0 10 ns VIN 100 – 1000 mVpp IO – – 2.4 2.4 4.0 4.0 mA NOTES: 1. Valid over voltage range 2.7 to 5.0 V; RL = 600 Ω @ VCC = 2.7 V; RL = 1.5 kΩ @ VCC = 5.0 V 2. Divide ratio of ÷32/33 @ 2.0 GHz Figure 1. Logic Diagram (MC12033A) D Q D Q D B A Figure 2. Modulus Setup Time Q Prop. Delay C In QB C QB C C M QB In In Out MC MC Setup D Q D QB C D C QB D E Q D QB C F Q C QB D G H C S Q Q MC QB MC Release Out Modulus setup time MC to out is the MC setup or MC release plus the prop delay. SW Figure 3. AC Test Circuit VCC = 2.7 to 5.0 V C3 Sine Wave Generator C1 VCC IN 50 Ω OUT C2 CL IN RL MC MC Input 2 SW Gnd EXTERNAL COMPONENTS C1 = C2 = 1000 pF C3 = 0.1 µF CL = 8.0 pF (Including Scope and jig capacitance) RL = 600 Ω @ VCC = 2.7 V RL = 1.5 kΩ @ VCC = 5.0 V MOTOROLA RF/IF DEVICE DATA MC12033A MC12033B Figure 4. Input Signal Amplitude versus Input Frequency ÉÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉÉ +10.0 +5.0 0 +710.0 +400.0 +225.0 Operating Window –5.0 AMPLITUDE (dBm) +1250.0 –10.0 –15.0 –20.0 +125.0 +71.0 +40.0 +22.5 –25.0 +12.8 –30.0 +7.10 –35.0 +4.00 –40.0 +2.25 –45.0 +1.25 –50.0 0 400 800 1200 1600 2000 2400 2800 mVrms +15.0 +0.71 3200 FREQUENCY (MHz) Divide Ratio = 64; VCC = 5.0 V; TA = 25°C Figure 5. Output Amplitude versus Input Frequency 2000 1200 800 mVpp 1600 400 0 400 800 1200 1600 2000 2400 2800 0 3200 FREQUENCY (MHz) MOTOROLA RF/IF DEVICE DATA 3 MC12033A MC12033B OUTLINE DIMENSIONS 8 P SUFFIX PLASTIC PACKAGE CASE 626–05 ISSUE K 5 –B– 1 NOTES: 1. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 2. PACKAGE CONTOUR OPTIONAL (ROUND OR SQUARE CORNERS). 3. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 4 F –A– NOTE 2 L DIM A B C D F G H J K L M N C J –T– N SEATING PLANE D M K G H 0.13 (0.005) T A M B M 8 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETER. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. C 5 0.25 H E M B M 1 4 h B X 45 _ e q A C SEATING PLANE L 0.10 A1 B 0.25 C B M S A INCHES MIN MAX 0.370 0.400 0.240 0.260 0.155 0.175 0.015 0.020 0.040 0.070 0.100 BSC 0.030 0.050 0.008 0.012 0.115 0.135 0.300 BSC ––– 10_ 0.030 0.040 M D SUFFIX PLASTIC PACKAGE CASE 751–06 (SO–8) ISSUE T D A MILLIMETERS MIN MAX 9.40 10.16 6.10 6.60 3.94 4.45 0.38 0.51 1.02 1.78 2.54 BSC 0.76 1.27 0.20 0.30 2.92 3.43 7.62 BSC ––– 10_ 0.76 1.01 S DIM A A1 B C D E e H h L q MILLIMETERS MIN MAX 1.35 1.75 0.10 0.25 0.35 0.49 0.19 0.25 4.80 5.00 3.80 4.00 1.27 BSC 5.80 6.20 0.25 0.50 0.40 1.25 0_ 7_ Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447 JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 141, 4–32–1 Nishi–Gotanda, Shagawa–ku, Tokyo, Japan. 03–5487–8488 Customer Focus Center: 1–800–521–6274 Mfax: [email protected] – TOUCHTONE 1–602–244–6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, Motorola Fax Back System – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 – http://sps.motorola.com/mfax/ HOME PAGE: http://motorola.com/sps/ 4 ◊ MC12033A/D MOTOROLA RF/IF DEVICE DATA