Rectron FMB150 Surface mount schottky barrier rectifier (voltage range 20 to 100 volts current 1.0 ampere) Datasheet

FM120
RECTRON
THRU
SEMICONDUCTOR
TECHNICAL SPECIFICATION
FM1100
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
VOLTAGE RANGE 20 to 100 Volts CURRENT 1.0 Ampere
FEATURES
*
*
*
*
*
Ideal for surface mounted applications
Low leakage current
Metallurgically bonded construction
Mounting position: Any
Weight: 0.09 gram
DO-214AC
MECHANICAL DATA
* Epoxy: Device has UL flammability classification 94V-O
0.067 (1.70)
0.051 (1.29)
0.110 (2.79)
0.086 (2.18)
0.180(4.57)
0.160(4.06)
0.012 (0.305)
0.006 (0.152)
0.091 (2.31)
0.067 (1.70)
0.059 (1.50)
0.035 (0.89)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 o C ambient temperature unless otherwise specified.
0.008 (0.203)
0.004 (0.102)
0.209 (5.31)
0.185 (4.70)
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted)
SYMBOL
RATINGS
FMB120 FMB130 FMB140 FMB150 FMB160 FMB180 FMB1100 UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
20
30
40
50
60
80
100
Maximum RMS Voltage
VRMS
14
21
28
35
42
56
70
Volts
VDC
20
30
40
50
60
80
100
Volts
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at Derating Lead Temperature
Volts
IO
1.0
Amps
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
I FSM
40
Amps
Typical Thermal Resistance (Note 1)
RθJA
50
0
Typical Junction Capacitance (Note 2)
CJ
110
Operating Temperature Range
TJ
Storage Temperature Range
pF
-65 to + 125
T STG
C/ W
-65 to + 150
-65 to + 150
0
C
0
C
ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted)
CHARACTERISTICS
SYMBOL
Maximum Instantaneous Forward Voltage at 1.0A DC
Maximum Average Reverse Current
@T A = 25 o C
at Rated DC Blocking Voltage
@T A = 100 o C
NOTES : 1. Thermal Resistance (Junction to Ambient).
2. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
3. P.C.B Monuted with 0.2X0.2” (5.0X5.0mm 2) copper pad area.
VF
IR
FMB120 FMB130 FMB140 FMB150 FMB160 FMB180 FMB1100 UNITS
.55
.70
.85
Volts
1.0
mAmps
10
mAmps
2001-5
RATING AND CHARACTERISTIC CURVES ( FM120 THRU FM1100 )
.75
FM
15
0~
0~
FM
12
.50
00
14
0
.25
11
FM
Single
Half Wave 60HZ
Resistive or
Inductive Load
0.375" (9.5mm) Lead Length
0
0
25
50
75
100
125
150
LEAD TEMPERATURE, (
)
175
INSTANTANEOUS FORWARD CURRENT, (A)
1.0
FM
AVREAGE FORWARD CURRENT, (A)
FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE
FIG. 3A - TYPICAL REVERSE CHARACTERISTICS
FM120~FM140
TJ = 125
10
1.0
TJ = 75
0.1
TJ = 25
.01
.001
10
20
40
60
80
100
120
TJ = 25
Pulse Width = 300uS
.1
.1
1% Duty Cycle
.3 .5
.7 .9 1.1 1.3 1.5 1.7 1.9 2.1
INSTANTANEOUS FORWARD VOLTAGE, (V)
100
10
1.0
TJ = 150
0.1
TJ = 125
.01
TJ = 75
FM150~FM160
FM180~FM1100
TJ = 25
FIG. 4 - TYPICAL JUNCTION CAPACITANCE
TJ = 25
100
80
60
40
20
10
.1
20
40
60
80
100
120 140
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
FIG. 5 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT
PEAK FORWARD SURGE
CURRENT, (A)
200
0
140
400
FM120
FM130
FM140
FM150
FM160
FM180
FM1100
1.0
.001
0
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
JUNCTION CAPACITANCE, (pF)
20
FIG. 3B - TYPICAL REVERSE CHARACTERISTICS
INSTANTANEOUS REVERSE CURRENT (mA)
INSTANTANEOUS REVERSE CURRENT (mA)
100
FIG. 2 - TYPICAL INSTANTANEOUS
FORWARD CHARCTERISTICS
50
40
30
8.3ms Single Half Sine-Wave
JEDEC Method
20
10
0
.4
1.0
4
10
REVERSE VOLTAGE, (V)
40
80
1
2
4 6 810
20 40
80100
NUMBER OF CYCLES AT 60Hz
Similar pages