Vishay MURB1520TRRPBF Ultrafast rectifier, 15 a fred pttm Datasheet

MURB1520PbF/MURB1520-1PbF
Vishay High Power Products
Ultrafast Rectifier,
15 A FRED PtTM
FEATURES
MURB1520-1PbF
MURB1520PbF
• Ultrafast recovery time
Available
• Low forward voltage drop
RoHS*
• Low leakage current
COMPLIANT
• 175 °C operating junction temperature
Base
cathode
2
• Lead (Pb)-free (“PbF” suffix)
2
• Designed and qualified for AEC Q101 level
DESCRIPTION/APPLICATIONS
N/C
D2PAK
MUR.. series are the state of the art ultrafast recovery
rectifiers specifically designed with optimized performance of
forward voltage drop and ultrafast recovery time.
The planar structure and the platinum doped life time control,
guarantee the best overall performance, ruggedness and
reliability characteristics.
These devices are intended for use in the output rectification
stage of SMPS, UPS, dc-to-dc converters as well as
freewheeling diode in low voltage inverters and chopper
motor drives.
Their extremely optimized stored charge and low recovery
current minimize the switching losses and reduce over
dissipation in the switching element and snubbers.
3
1
3
Anode
1
N/C
Anode
TO-262
PRODUCT SUMMARY
trr
35 ns
IF(AV)
15 A
VR
200 V
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
Peak repetitive reverse voltage
VRRM
Average rectified forward current
IF(AV)
Non-repetitive peak surge current
IFSM
Peak repetitive forward current
IFM
Operating junction and storage temperatures
TEST CONDITIONS
Total device, rated VR, TC = 150 °C
MAX.
UNITS
200
V
15
A
200
Rated VR, square wave, 20 kHz, TC = 150 °C
30
TJ, TStg
- 65 to 175
°C
ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified)
PARAMETER
Breakdown voltage,
blocking voltage
SYMBOL
VBR,
VR
TEST CONDITIONS
MIN.
TYP.
MAX.
200
-
-
IF = 15 A
-
-
1.05
IF = 15 A, TJ = 150 °C
-
-
0.85
VR = VR rated
-
-
10
TJ = 150 °C, VR = VR rated
-
-
500
IR = 100 µA
UNITS
V
Forward voltage
VF
Reverse leakage current
IR
Junction capacitance
CT
VR = 200 V
-
55
-
pF
Series inductance
LS
Measured lead to lead 5 mm from package body
-
8.0
-
nH
µA
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 94082
Revision: 05-Sep-08
For technical questions, contact: [email protected]
www.vishay.com
1
MURB1520PbF/MURB1520-1PbF
Vishay High Power Products
Ultrafast Rectifier,
15 A FRED PtTM
DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified)
PARAMETER
Reverse recovery time
Peak recovery current
SYMBOL
trr
IRRM
TEST CONDITIONS
MIN.
TYP.
MAX.
IF = 1.0 A, dIF/dt = 50 A/µs, VR = 30 V
-
-
35
TJ = 25 °C
-
22
-
TJ = 125 °C
-
39
-
TJ = 25 °C
TJ = 125 °C
IF = 15 A
dIF/dt = 200 A/µs
VR = 160 V
-
1.6
-
-
4.1
-
UNITS
ns
A
TJ = 25 °C
-
19
-
TJ = 125 °C
-
90
-
MIN.
TYP.
MAX.
UNITS
TJ, TStg
- 65
-
175
°C
Thermal resistance,
junction to case
RthJC
-
-
1.5
Thermal resistance,
junction to ambient
RthJA
-
-
50
Thermal resistance,
case to heatsink
RthCS
-
0.5
-
-
2.0
-
-
0.07
-
oz.
-
12
(10)
kgf · cm
(lbf · in)
Reverse recovery charge
Qrr
nC
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
Maximum junction and
storage temperature range
SYMBOL
TEST CONDITIONS
Mounting surface, flat, smooth and
greased
Weight
6.0
(5.0)
Mounting torque
Marking device
www.vishay.com
2
Case style D2PAK
MURB1520
Case style TO-262
MURB1520-1
For technical questions, contact: [email protected]
°C/W
g
Document Number: 94082
Revision: 05-Sep-08
MURB1520PbF/MURB1520-1PbF
100
Vishay High Power Products
1000
IR - Reverse Current (µA)
IF - Instantaneous Forward Current (A)
Ultrafast Rectifier,
15 A FRED PtTM
10
TJ = 175 °C
TJ = 150 °C
TJ = 25 °C
1
0.1
TJ = 175 °C
100
TJ = 150 °C
TJ = 125 °C
10
TJ = 100 °C
1
0.1
TJ = 25 °C
0.01
0
0.3
0.6
0.9
0
1.5
1.2
50
100
200
150
250
VF - Forward Voltage Drop (V)
VR - Reverse Voltage (V)
Fig. 1 - Typical Forward Voltage Drop Characteristics
Fig. 2 - Typical Values of Reverse Current vs.
Reverse Voltage
CT - Junction Capacitance (pF)
1000
100
TJ = 25 °C
10
1
10
100
1000
VR - Reverse Voltage (V)
ZthJC - Thermal Impedance (°C/W)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
10
1
PDM
0.1
Single pulse
(thermal resistance)
0.01
0.00001
0.0001
t1
D = 0.50
D = 0.20
D = 0.10
D = 0.05
D = 0.02
D = 0.01
0.001
t2
Notes:
1. Duty factor D = t1/t2 .
2. Peak TJ = PDM x ZthJC + TC
0.01
0.1
.
1
t1 - Rectangular Pulse Duration (s)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics
Document Number: 94082
Revision: 05-Sep-08
For technical questions, contact: [email protected]
www.vishay.com
3
MURB1520PbF/MURB1520-1PbF
Ultrafast Rectifier,
15 A FRED PtTM
Vishay High Power Products
60
170
50
160
40
trr (ns)
Allowable Case Temperature (°C)
180
DC
150
Square wave (D = 0.50)
Rated VR applied
140
IF = 30 A
IF = 15 A
IF = 8 A
30
20
See note (1)
10
100
130
0
10
5
15
20
25
1000
IF(AV) - Average Forward Current (A)
dIF/dt (A/µs)
Fig. 5 - Maximum Allowable Case Temperature vs.
Average Forward Current
Fig. 7 - Typical Reverse Recovery Time vs. dIF/dt
200
25
20
RMS limit
15
D = 0.01
D = 0.02
D = 0.05
D = 0.10
D = 0.20
D = 0.50
10
5
DC
5
10
15
20
160
VR = 160 V
TJ = 125 °C
TJ = 25 °C
120
IF = 30 A
IF = 15 A
IF = 8 A
80
40
0
0
Qrr (nC)
Average Power Loss (W)
VR = 160 V
TJ = 125 °C
TJ = 25 °C
25
0
100
1000
IF(AV) - Average Forward Current (A)
dIF/dt (A/µs)
Fig. 6 - Forward Power Loss Characteristics
Fig. 8 - Typical Stored Charge vs. dIF/dt
Note
(1) Formula used: T = T - (Pd + Pd
C
J
REV) x RthJC;
Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6);
PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR
www.vishay.com
4
For technical questions, contact: [email protected]
Document Number: 94082
Revision: 05-Sep-08
MURB1520PbF/MURB1520-1PbF
Ultrafast Rectifier,
15 A FRED PtTM
Vishay High Power Products
VR = 200 V
0.01 Ω
L = 70 µH
D.U.T.
dIF/dt
adjust
D
IRFP250
G
S
Fig. 9 - Reverse Recovery Parameter Test Circuit
(3)
trr
IF
ta
tb
0
Qrr
(2)
IRRM
(4)
0.5 IRRM
dI(rec)M/dt (5)
0.75 IRRM
(1) dIF/dt
(1) dIF/dt - rate of change of current
through zero crossing
(2) IRRM - peak reverse recovery current
(3) trr - reverse recovery time measured
from zero crossing point of negative
going IF to point where a line passing
through 0.75 IRRM and 0.50 IRRM
extrapolated to zero current.
(4) Qrr - area under curve defined by trr
and IRRM
Qrr =
trr x IRRM
2
(5) dI(rec)M/dt - peak rate of change of
current during tb portion of trr
Fig. 10 - Reverse Recovery Waveform and Definitions
Document Number: 94082
Revision: 05-Sep-08
For technical questions, contact: [email protected]
www.vishay.com
5
MURB1520PbF/MURB1520-1PbF
Ultrafast Rectifier,
15 A FRED PtTM
Vishay High Power Products
ORDERING INFORMATION TABLE
Device code
MUR
B
15
20
-1
1
2
3
4
5
1
-
Ultrafast MUR series
2
-
B = D2PAK/TO-262
3
-
Current rating (15 = 15 A)
4
-
Voltage rating (20 = 200 V)
5
-
None = D2PAK
-1 = TO-262
6
-
None = Tube (50 pieces)
TRL PbF
6
7
TRL = Tape and reel (left oriented, for D2PAK package)
TRR = Tape and reel (right oriented, for D2PAK package)
7
-
None = Standard production
PbF = Lead (Pb)-free
LINKS TO RELATED DOCUMENTS
Dimensions
http://www.vishay.com/doc?95014
Part marking information
http://www.vishay.com/doc?95008
Packaging information
http://www.vishay.com/doc?95032
SPICE model
http://www.vishay.com/doc?95271
www.vishay.com
6
For technical questions, contact: [email protected]
Document Number: 94082
Revision: 05-Sep-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages