MA-COM MAMXSS0011 Mmic medium level mixer Datasheet

MAMXSS0011
MMIC Medium Level Mixer
800 - 1000 MHz
Rev. V2
Functional Diagram
Features
•
•
•
•
•
•
•
•
•
Low Conversion Loss
1 dB Compression: +21 dBm
LO Drive Level: +11 to +23 dBm
DC - 100 MHz IF Bandwidth
Lead-Free SOIC-8 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of MD54-0004
C
L
R
8
7
6
5
1
2
3
4
Description
M/A-COM’s MAMXSS0011 is a passive mixer that
achieves the performance of a double balanced
diode mixer in a lead-free surface mount plastic
SOIC-8 package. The MAMXSS0011 is ideally
suited for use where high level RF signals and very
wide dynamic range are required.
Typical applications include frequency up/down
conversion, modulation, demodulation in systems
such as cellular receivers and transmitters and 900
MHz ISM band applications.
External matching network on LO Port: R = 470 ohms, L = 18 nH, C = 4.7 pF
The MAMXSS0011 uses FETs as mixing elements
to achieve very wide dynamic range in a low cost
plastic package. The mixer operates with LO drive
levels of +11 dBm to +23 dBm. DC bias is
not required.
Pin Configuration
Pin No.
Function
Pin No.
Function
1
Ground
5
Ground
2
RF Port
6
LO Port
3
Ground
7
IF Port
4
Ground
8
Ground
M/A-COM’s MAMXSS0011 is fabricated using a
mature 1-micron GaAs process. The process
features full IC passivation for increased
performance and reliability.
Ordering Information 1
Part Number
Package
MAMXSS0011
Bulk Packaging
MAMXSS0011TR
1000 piece reel
MAMXSS0011SMB
Designer’s Kit
1. Reference Application Note M513 for reel size information.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAMXSS0011
MMIC Medium Level Mixer
800 - 1000 MHz
Rev. V2
Electrical Specifications:
Test Conditions: RF = 900 MHz (-10 dBm), LO = 840 MHz (13 dBm), IF = 60 MHz, TA = +25°C
Parameter
Test Conditions
Units
Min
Typ
Max
Conversion Loss
—
dB
—
7.5
9.5
Isolation
LO to RF
LO to IF
RF to IF
dB
dB
dB
—
—
—
38
22
12
—
—
—
VSWR
LO Port
RF Port
IF Port
Ratio
Ratio
Ratio
—
—
—
2.5:1
2.0:1
2.0:1
—
—
—
Input 1 dB Compression
RF Freq. = 900 MHz, LO = +13 dBm
dBm
—
+21
—
Two-Tone IM Ratio2
Two tones at –10 dBm each,
Tone spacing 100 kHz, IF = 60 MHz
dBc
45
60
—
2. IMR vs RF drive level can be calculated by the formula: IMR = 45 - (1.5 x P IN )
Absolute Maximum Ratings 3,4
Absolute Maximum
RF Input Power5
+22 dBm
5
LO Drive Power
+23 dBm
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
3. Exceeding any one or combination of these limits may cause
permanent damage to this device.
4. M/A-COM does not recommend sustained operation near
these survivability limits.
5. Total combined power for RF and LO ports should not
exceed +23 dBm.
Harmonic of LO
Parameter
Spurious Table
4x
8.9
-1.1
40.1
39.9
70.1
61.6
69.9
63.9
73.4
64.4
3x
2.2
-7.7
34.2
34.1
59.8
63.8
67.3
64.5
73
63
2x
2.9
-7.1
23.7
23.8
72.8
64.7
72.9
63.3
71.9
61.9
1x
-2.2
-12.2
0
0
61.4
63.3
71.3
61.8
71.1
61.9
0x
X
X
4.7
4.8
65.1
61.3
71.5
61.9
72.1
62.3
0x
1x
2x
3x
4x
Harmonic of RF
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
The spurious table shows the spurious signals resulting from the
mixing of the RF and LO input signals, assuming down
conversion. Mixing products are indicated by the number of dB
below the conversion loss. The lower frequency mixing term is
shown for two different RF input levels. The top number is for an
RF input power of -5 dBm, the lower number is for -15 dBm.
|mFRF - nFLO |, RF = -5 dBm
|mFRF - nFLO |, RF = -15 dBm
RF Frequency = 900 MHz
LO Frequency = 840 MHz
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAMXSS0011
MMIC Medium Level Mixer
800 - 1000 MHz
Rev. V2
Typical Performance Curves
Isolation
Conversion Loss
10
50
9
40
8
30
7
20
6
10
5
800
850
900
950
1000
LO to RF
LO to IF
RF to IF
0
800
850
900
950
1000
RF Frequency (MHz)
RF Frequency (MHz)
RF, LO and IF VSWR
Input P1dB
IF Frequency (MHz)
30
0
40
80
120
160
200
880
920
960
1000
5
RF
LO
IF
25
4
20
3
15
2
1
10
800
850
900
950
RF Frequency (MHz)
1000
0
800
840
RF Frequency (MHz)
Lead-Free SOIC-8†
† Reference Application Note M538 for lead-free solder reflow recommendations.
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
Similar pages