ADNS-5110-001 Trim Lens for LED Mouse Data Sheet Description The ADNS-5110-001 trim lens is designed for use with Avago Technologies ADNS-5xxx series of LED mouse sensors. Together with the HLMP-EG3E-xxxxx LED and the sensor, the ADNS-5110-001 trim lens completes the optical navigation system to provide the directed illumination for the optical imaging process necessary for the operation of the optical sensor. The ADNS-5110-001 lens is a precision molded optical component and should be handled with care to avoid scratching and contamination of the optical surfaces. Lens ID 30.00 1.181 A A 16.00 0.630 WXYZ Logo 01 Lens Revision Cavity No. Lens surface 3 Lens surface 4 11.69 0.460 10.05 0.396 1.28 0.050 0.97 0.038 4.48 0.176 Lens surface 1 13.22 0.520 Notes: 1. Dimensions in millimeters/inches 2. Dimensional tolerance: ±0.1mm 3. Angular tolerance: ±3° 4. Maximum flash: +0.20mm 5. () reference dimension Figure1. ADNS-5110-001 trim lens outline drawings and details Detail B Lens surface 5 Lens surface 6 Lens surface 2 4.18 at tip 0.165 Section A - A Detail - B Scale 5:1 Mechanical Assembly Requirements All specifications reference Figure 2, Optical System Assembly Diagram Parameters Symbol Min Typical Max Unit Distance from Object Surface to Lens Reference Plane A 2.30 2.40 2.50 mm Distance from Object Surface to Sensor Reference Plane B 6.77 6.87 6.97 mm Unit Conditions Lens Design Optical Performance Specifications All specifications are based on the Mechanical Assembly Requirements. Parameters Symbol Magnification Min Typical Max 0.72 0.8 0.88 Design Wavelength Object to Image Distance Lens Material Index of Refraction N Optical Depth of Field DOF 639 8.84 9.34 1.580 1.582 1.584 Field Coverage Radius * Design value mm At 639nm 0.3 mm 0.6 mm Design value Lens material is polycarbonate or Polystyrene HH30. Cyanoacrylate based adhesives should not be used as they will cause lens material deformation. Sensor Lens A B Surface 2.40 0.094 6.87 0.271 Lens Reference Plane Note: A – Distance from object surface to lens reference plane B – Distance from object surface to sensor reference plane Figure 2. Distance from lens reference plane to tracking surface (Z) 2 At nominal plane. nm 8.34 Conditions Mounting Illustration for the ADNS-5110-001 LED Mouse Trim Lens The STEP or IGES format drawing file with design specifications for the LED mouse base plate features and lens are available. These features are useful in maintaining proper positioning and alignment of the ADNS-5110-001 trim lens in the optical system assembly of the mouse. These file can be obtained by downloading from Avago Technologies website or by contacting your local Avago Technologies sales representative. LED LED Clip Sensor Customer supplied PCB ADNS-5110-001 Customer supplied base plate with recommended alignment features per IGES drawing Figure 3. Exploded View of the Optical System Assembly and Mounting For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. AV02-1886EN - August 16, 2011