Kingbright APT1608SEC 1.6x0.8mm smd chip led lamp Datasheet

1.6X0.8mm SMD CHIP LED LAMP
P/N: APT1608SEC
SUPER BRIGHT ORANGE
Description
Features
1.6mmX0.8mm SMT LED, 0.75mm THICKNESS.
The Super Bright Orange device is made with DH
LOW POWER CONSUMPTION.
InGaAlP (on GaAs substrate) light emitting diode chip.
W IDE VIEW ING ANGLE.
IDEAL FOR BACKLIGHT AND INDICATOR.
VARIOUS COLORS AND LENS TYPES AVAILABLE.
MOISTURE SENSITIVITY LEVEL : LEVEL 3.
PACKAGE: 2000PCS / REEL .
RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3.Specifications are subject to change without notice.
SPEC NO: DSAD0927
REV NO: V.5
DATE: MAR/25/2006
PAGE: 1 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP:1203005345
Selection Guide
Part No.
Dice
APT1608SEC
Iv (mcd) [2]
@ 20mA
Lens Type
SUPER BRIGHT ORANGE (InGaAlP)
WATER CLEAR
Viewing
Angle [1]
Min.
Typ.
2θ
θ1/2
70
200
120°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Super Bright Orange
λD [1]
Dominant Wavelength
∆λ1/2
Max.
Units
Test Conditions
610
nm
IF=20mA
Super Bright Orange
601
nm
IF=20mA
Spectral Line Half-width
Super Bright Orange
29
nm
IF=20mA
C
Capacitance
Super Bright Orange
30
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Super Bright Orange
2.0
2.5
V
IF=20mA
IR
Reverse Current
Super Bright Orange
10
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Orange
Units
Power dissipation
75
mW
Forward Current
30
mA
Peak Forward Current [1]
195
mA
5
V
Reverse Voltage
Operating / Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAD0927
REV NO: V.5
DATE: MAR/25/2006
PAGE: 2 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP:1203005345
Super Bright Orange
APT1608SEC
SPEC NO: DSAD0927
REV NO: V.5
DATE: MAR/25/2006
PAGE: 3 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP:1203005345
APT1608SEC
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
SPEC NO: DSAD0927
REV NO: V.5
DATE: MAR/25/2006
PAGE: 4 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP:1203005345
PACKING & LABEL SPECIFICATIONS
APT1608SEC
SPEC NO: DSAD0927
REV NO: V.5
DATE: MAR/25/2006
PAGE: 5 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP:1203005345
Similar pages