Fairchild DM7420 Dual 4-input nand gate Datasheet

Revised February 2000
DM7420
Dual 4-Input NAND Gate
General Description
This device contains two independent gates each of which
performs the logic NAND function.
Ordering Code:
Order Number
DM7420N
Package Number
N14A
Package Description
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Connection Diagram
Function Table
Y = ABCD
Inputs
Output
A
B
C
D
Y
X
X
X
L
H
X
X
L
X
H
X
L
X
X
H
L
X
X
X
H
H
H
H
H
L
H = HIGH Logic Level
L = LOW Logic Level
X = Either LOW or HIGH Logic Level
© 2000 Fairchild Semiconductor Corporation
DS006506
www.fairchildsemi.com
DM7420 Dual 4-Input NAND Gate
August 1986
DM7420
Absolute Maximum Ratings(Note 1)
Supply Voltage
Note 1: The “Absolute Maximum Ratings” are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum ratings.
The “Recommended Operating Conditions” table will define the conditions
for actual device operation.
7V
Input Voltage
5.5V
0°C to +70°C
Operating Free Air Temperature Range
−65°C to +150°C
Storage Temperature Range
Recommended Operating Conditions
Symbol
Parameter
Min
Nom
Max
Units
4.75
5
5.25
V
LOW Level Input Voltage
0.8
V
IOH
HIGH Level Output Current
−0.4
mA
IOL
LOW Level Output Current
16
mA
TA
Free Air Operating Temperature
70
°C
VCC
Supply Voltage
VIH
HIGH Level Input Voltage
VIL
2
V
0
Electrical Characteristics
over recommended operating free air temperature range (unless otherwise noted)
Symbol
Parameter
Conditions
VI
Input Clamp Voltage
VCC = Min, II = −12 mA
VOH
HIGH Level
VCC = Min, IOH = Max
Output Voltage
VIL = Max
VOL
II
LOW Level
VCC = Min, IOL = Max
Output Voltage
VIH = Min
Input Current @ Max
VCC = Max, VI = 5.5V
Min
2.4
Typ
(Note 2)
Max
Units
−1.5
V
3.4
0.2
V
0.4
V
1
mA
Input Voltage
IIH
HIGH Level Input Current
VCC = Max, VI = 2.4V
40
µA
IIL
LOW Level Input Current
VCC = Max, VI = 0.4V
−1.6
mA
IOS
Short Circuit Output Current
VCC = Max (Note 3)
−55
mA
ICCH
Supply Current with Outputs HIGH
VCC = Max
2
4
mA
ICCL
Supply Current with Outputs LOW
VCC = Max
6
11
mA
Min
Max
Units
22
ns
15
ns
−18
Note 2: All typicals are at VCC = 5V, TA = 25°C.
Note 3: Not more than one output should be shorted at a time.
Switching Characteristics
at VCC = 5V and TA = 25°C
Symbol
tPLH
tPHL
Parameter
Conditions
Propagation Delay Time
CL = 15 pF
LOW-to-HIGH Level Output
RL = 400Ω
Propagation Delay Time
HIGH-to-LOW Level Output
www.fairchildsemi.com
2
DM7420 Dual 4-Input NAND Gate
Physical Dimensions inches (millimeters) unless otherwise noted
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Package Number N14A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
3
www.fairchildsemi.com
Similar pages