Lumileds LXHL-MLJB Power light source luxeon flood Datasheet

power light source
®
Luxeon Flood
Technical Data DS24
Luxeon® is a revolutionary, energy efficient and ultra compact new light
source, combining the lifetime and reliability advantages of Light Emitting
Diodes with the brightness of conventional lighting.
Features
• Highest Flux per LED in the world
• Very long operating life
Luxeon features one or more power light sources mounted onto an
aluminumcore printed circuit board, allowing for ease of assembly,
(up to100k hours)
• Available in White, Green, Cyan, Blue, Red
and Amber
optimum cooling and accurate light center positioning.
• More Energy Efficient than Incandescent and
most Halogen lamps
For high volume applications, custom Luxeon power light source designs
are available upon request, to meet your specific needs.
• Low voltage DC operated
• Cool beam, safe to the touch
• Instant light (less than 100 ns)
• Fully dimmable
Luxeon Power Light Sources give you total design freedom and
unmatched brightness, creating a new world of light.
Luxeon
TM
Emitters can be purchased in reels for high volume assembly. Sample kits are
• No UV
• Superior ESD protection
Typical Applications
also available for prototyping and design evaluation. A sample kits contains a strip of 50
• Decorative flood
taped emitters. To order a sample kit, add a “K” to the end
• Traffic lights
• Railway crossings and wayside
• Beacons
Luxeon Flood is available in white, green,
cyan, blue, red, and amber.
Mechanical Dimensions
Notes:
Flood 12-Up
1.
2.
Resistor
3.
4.
Connector on board AMP type, code
2-179123-4 ; Mating connector –
AMP receptacle housing assembly,
code 173977-4.
Flood 12-Up has a resister component,
2.2k Ohm.
Drawing not to scale.
All dimensions are in millimeters.
25-0032
Flood 18-Up
Notes:
1.
2.
3.
4.
25-0042
Circuit Diagram
Flood 12-Up
Flood 18-Up
Resistor
Luxeon Flood
NTC
2
Document #: DS24 (10/05)
Connector on board AMP type, code
2-179123-4 ; Mating connector –
AMP receptacle housing assembly,
code 173977-4.
Flood 18-Up has an NTC component,
10k Ohm.
Drawing not to scale.
All dimensions are in millimeters.
Flux Characteristics at 350mA,
Junction Temperature, TJ = 25oC
Notes:
1.
Configuration
Radiation
Pattern
Batwing
(low dome)
Flood 12-up
Lambertian
(high dome)
Batwing
(low dome)
Flood 18-up
Lambertian
(high dome)
Color
Minimum
Luminous
Flux (lm)
ΦV [1,2]
Part
Number
Typical
Luminous
Flux (lm)
ΦV [2]
Test
Current
(mA)
2.
3.
White
Green
Cyan
Blue[3]
Red
Amber
Red
Amber
LXHL-MWCE
LXHL- MMCA
LXHL- MECA
LXHL- MBCA
LXHL- MDCA
LXHL- MLCA
LXHL- MDCB
LXHL- MLCB
165
165
165
45
165
125
365
280
300
360
360
120
320
300
525
500
700
700
700
700
700
700
700
700
White
Green
Cyan
Blue[3]
Red
Amber
Red
Amber
LXHL- MWJE
LXHL- MMJA
LXHL- MEJA
LXHL- MBJA
LXHL- MDJA
LXHL- MLJA
LXHL- MDJB
LXHL- MLJB
250
250
250
65
250
190
550
420
450
540
540
180
480
450
790
750
1050
1050
1050
1050
1050
1050
1050
1050
Optical Characteristics at 350mA,
Junction Temperature, TJ = 25oC
Radiation
Pattern
Color
Dominant
Wavelength[1]
λD
or Color
Temperature[2]
CCT
Min.
Typ.
Max.
Notes:
1.
Spectral
Halfwidth[3]
(nm)
∆λ1/2
temperature
coefficient
of dominant
wavelength
(nm/oC)
∆λD/ ∆ΤJ
Viewing
Angle per
LED[4,7]
(Degrees)
2θ 1/2
Batwing
(low dome)
White
Green
Cyan
Blue
Red
Amber
4500 K
520 nm
490 nm
460 nm
620.5 nm
584.5 nm
5500 K
530 nm
505 nm
470 nm
625 nm
590 nm
10,000 K
550 nm
520 nm
490 nm
645 nm
597 nm
--35
30
25
20
14
--0.04
0.04
0.04
0.05
0.09
110
110
110
110
110
110
Lambertian
(high dome)
Red
Amber
620.5 nm
584.5 nm
627 nm
590 nm
645 nm
597 nm
20
14
0.05
0.09
140
140
2.
3.
4.
5.
6.
7.
8.
Luxeon Flood
3
Minimum luminous flux performance
guaranteed within published
operating conditions.
Luxeon types with even higher
luminous flux levels will become
available in the future. Please
consult your Lumileds Authorized
Distributor or Lumileds sales
representative for more information.
Minimum flux value for 470 nm
devices. Due to the CIE eye
response curve in the short blue
wavelength range, the minimum
luminous flux will vary over the
Lumileds blue color range. Luminous
flux will range from minimums of 35
lm for 12-Up and 50 lm for 18-Up
Floods at 460nm to typicals of 190
lm for 12-Up and 280 lm for 18-Up
Floods at 480nm due to this effect.
Although the luminous power
efficiency is lower in the short blue
wavelength range, radiometric power
efficiency increases as wavelength
decreases. For more information,
consult the Luxeon Design Guide,
available upon request.
Document #: DS24 (10/05)
Dominant wavelength is derived from
the CIE 1931 Chromaticity diagram
and represents the perceived color.
CRI (Color Rendering Index) for White
product types is 70.
Spectral width at ½ of the peak
intensity.
θ½ is the off axis angle from lamp
centerline where the luminous intensity
is ½ of the peak value.
Luxeon Floods are not designed for
direct view applications. Lumileds
reserves the right to mix LEDs of
different color and flux values to
achieve the typical values listed above,
possibly resulting in visible variation
across the array.
All red and amber products built with
Aluminum Indium Gallium Phosphide
(AlInGaP).
All white, green, cyan, and blue
products built with Indium Gallium
Nitride (InGaN).
All power light sources represented
here are IEC825 Class 2 for eye
safety.
Electrical Characteristics at Junction
Temperature, TJ = 25oC
Notes:
Flood 12-Up
Temp
1.
coefficient
Radiation
Pattern
Color
Forward Voltage (V) VF
Min.
Typ.
Max.
(Ω) RD
of
Forward
voltage[2]
(mV/oC)
∆VF/ ∆TJ
junction
to board[3]
(oC/W) RθJ-B
test
current
(mA) IF
Dynamic
resistance[1]
Thermal
resistance,
White
Green
Cyan
Blue
Red
Amber
16
16
16
16
14
14
21
21
21
21
17
17
24
24
24
24
20
20
3
3
3
3
7.2
7.2
-12
-12
-12
-12
-12
-12
1.7
1.7
1.7
1.7
1.7
1.7
700
700
700
700
700
700
Lambertian
Red
(high dome) Amber
14
14
18
18
21
21
7.2
7.2
-12
-12
1.9
1.9
700
700
Temp
coefficient
of forward
voltage[2]
(mV/oC)
∆VF/ ∆TJ
Thermal
resistance,
junction
to board[3]
(oC/W) RθJ-B
test
current
(mA) IF
Batwing
(low dome)
2.
3.
Dynamic resistance is the inverse of
the slope in linear forward voltage
model for LEDs. See Figures 3a and
3b.
Measured between 25oCT≤ TJ ≤
110oC at IF = 700mA for Flood 12-Up
and IF = 1050mA for Flood 18-Up.
To determine the junction
temperature, multiply by total array
power. Due to the high packing
density of the Floods, the board
temperature rise is significant and
must always have additional heat
sinking at nominal operating
conditions.
Flood 18-Up
Radiation
Pattern
Color
Forward Voltage (V) VF
Min.
Typ.
Max.
Dynamic
resistance[1]
(Ω) RD
White
Green
Cyan
Blue
Red
Amber
16
16
16
16
14
14
21
21
21
21
17
17
24
24
24
24
20
20
2
2
2
2
4.8
4.8
-12
-12
-12
-12
-12
-12
1.1
1.1
1.1
1.1
1.1
1.1
1050
1050
1050
1050
1050
1050
Lambertian
Red
(high dome) Amber
14
14
18
18
21
21
4.8
4.8
-12
-12
1.3
1.3
1050
1050
Batwing
(low dome)
Absolute Maximum Ratings
Flood 12-Up
White/Green/
Cyan/Blue
Parameter
[1]
DC Forward Current (mA)
Peak Pulsed Forward Current (mA)
Average Forward Current (mA)
ESD Sensitivity [2]
LED Junction Temperature (oC)
Aluminum-Core PCB Temperature (oC)
Storage & Operating Temperature(oC)
Luxeon Flood
Flood 18-Up
Red/Amber
700
770
1000
1100
700
700
± 16,000V HBM
135
120
105
105
-40 to +105
4
White/Green/
Cyan/Blue
1.
1050
1155
1500
1650
1050
1050
± 16,000V HBM
135
120
105
105
-40 to +105
-40 to +105
Notes:
Red/Amber
-40 to +105
Document #: DS24 (10/05)
2.
Proper current derating must be
observed to maintain junction
temperature below the maximum.
For more information, consult Luxeon
Design Guide, available upon request.
LEDs are not designed to be driven in
reverse bias. Please consult Lumileds’
Application Brief AB11 for further
information.
Wavelength Characteristics
Relative Specrtal Power Distribution
Relative Spectral Power
Distribution
1.0
C YA N
Figure 1a.
Relative Intensity vs. Wavelength.
A M B ER
GR EEN
0.8
B LUE
R ED
0.6
0.4
0.2
0.0
400
450
500
550
600
650
700
Wavelength (nm)
1.0
Figure 1b.
White Color Spectrum of Typical CCT
Part, Integrated Measurement.
0.8
0.6
0.4
0.2
0.0
350
400
450
500
550
600
650
700
750
800
Wavelength (nm)
Relative Light Output (%)
Light Output Characteristics
150
140
130
120
110
Figure 2a.
Relative Light Output vs. Junction
Temperature for White, Green, Cyan
and Blue.
Green
B lue
White
Cyan
100
90
80
70
60
50
-20
0
20
40
60
80
100
120
o
Relative Light Output (%)
Junction Temperature, TJ ( C)
200
180
160
140
120
Figure 2b.
Relative Light Output vs. Junction
Temperature for Red and Amber.
100
80
60
40
20
0
Red
A mber
-20
0
20
40
60
80
100
120
o
Junction Temperature, TJ ( C)
Luxeon Flood
5
Document #: DS24 (10/05)
18-Up 12-Up
1200 400
800
1050
700
350
900 300
600
750 250
500
200
400
600
450 150
300
300 100
200
150
100
50
0
0 0.5
3 1.0
6 1.5
9 12
15 3.0
18 3.5
21 4.0
24
0.0
2.0 2.5
1
0.8
0.6
0.4
0.2
0
100
200
300
200
400
600
300
600
900
750 250
500
600 200
400
450 150
300
300 100
200
150 100
50
0
1.2
1.0
0.8
0.6
0.4
0.2
0.0
0
0
400
800 12-Up
1200 18-Up
Figure 4a. Relative Luminous Flux vs. Forward
Current for White, Green, Cyan and Blue at
TJ = 25oC maintained.
IF - Forward Current (mA)
I - Forward Current (mA)
IF –F Forward Current (mA)
600
500
R θ J-A=6oC/W
R θ J-A=5oC/W
R θ J-A=4oC/W
R θ J-A=3oC/W
0
25
50
75
100
125
150
400
300
200
R θ J-A=6oC/W
R θ J-A=5oC/W
R θ J-A=4oC/W
R θ J-A=3oC/W
100
0
IF - Forward Current (mA)
IF - Forward Current (mA)
800
600
R θ J-A=4oC/W
R θ J-A=3oC/W
R θ J-A=2oC/W
0
50
75
100
125
150
75
100
125
1200
1000
800
600
R θ J-A=4oC/W
R θ J-A=3oC/W
R θ J-A=2oC/W
400
200
0
0
TA - Ambient Temperature (oC)
25
50
75
100
125
TA - Ambient Temperature ( oC)
Figure 6a. Maximum Forward Current vs.
Ambient Temperature. Derating based on
TJMAX = 135 oC for White, Green, Cyan and
Blue18-Up.
Luxeon Flood
50
Figure 5b. Maximum Forward Current vs.
Ambient Temperature. Derating based
on TJMAX = 120 oC for Red and Amber 12-Up.
1000
25
25
TA - Ambient Temperature (oC)
1200
0
800 12-Up
400
1200 18-Up
600
500
0
Figure 5a. Maximum Forward Current vs.
Ambient Temperature. Derating based on
TJMAX = 135 oC for White, Green, Cyan and
Blue12-Up.
200
600
300
900
800
700
TA - Ambient Temperature ( oC)
400
400
200
600
Figure 4b. Relative Luminous Flux vs. Forward
Current for Red and Amber at TJ = 25oC
maintained.
800
700
100
0
200
100
300
IF - Average Forw ard Current (mA)
IF - Average Forw ard Current (mA)
400
300
200
Driving these high power devices at
currents less than the test conditions
may produce unpredictable results
and may be subject to variation in
performance. Pulse width modulation
is recommended for dimming effects.
900 300
600
Normalized Relative Luminous Flux
1.2
0
0
Note:
1050 350
700
0.0
0 0.5
3 1.0
6 1.5
9 2.0
12 2.5
15 3.0
18 3.5
21
V F - Forw ard Voltage (Volts)
Figure 3b. Forward Current vs. Forward Voltage
for Red and Amber.
V F - Forw ard Voltage (Volts)
Figure 3a. Forward
Current vs. Forward Voltage
for White, Green, Cyan and Blue.
Normalized Relative Luminous Flux
18-Up 12-Up
1200 400
800
IF - Average Forward Current (mA)
IF - Average Forward Current (mA)
Forward Current Characteristics, TJ = 25oC
Figure 6b. Maximum Forward Current vs.
Ambient Temperature. Derating based
on TJMAX = 120 oC for Red and Amber 18-Up.
6
Document #: DS24 (10/05)
Representative Spatial Radiation Pattern
100
90
80
70
60
50
40
30
20
10
0
-100 -80 -60 -40 -20
Relative Intensity (%)
Relative Intensity (%)
Batwing Radiation Pattern (without optics)
0
20
40
60
80
100
100
90
80
70
60
50
40
30
Typical Upper Bound
20
TypicalLo wer Bo und
10
0
-100 -80 -60 -40 -20 0 20 40 60
Angular Displacement (Degrees)
Note:
For more detailed technical information
regarding Luxeon radiation patterns,
please consult your Lumileds Authorized
Distributor or Lumileds sales representative.
80 100
Angular Displacement (Degrees)
Figure 7a. Representative Spatial
Radiation Pattern per Luxeon
emitter White.
Figure 7b. Representative Spatial Radiation
Pattern per Luxeon emitter for Red, Amber,
Green, Cyan and Blue.
Relative Intensity (%)
Lambertian Radiation Pattern
100
90
80
70
60
50
40
30
20
10
0
-100 -80 -60 -40 -20 0 20 40 60
Angular Displacement (Degrees)
80 100
Figure 8. Representative Spatial Radiation Pattern
per Luxeon emitter for Red and Amber.
Average Lumen Maintenance Characteristics
Lifetime for solidstate lighting devices (LEDs) is typically defined in terms of
lumen maintenance—the percentage of initial light output remaining after a
specified period of time. Lumileds projects that Luxeon products will deliver on
average 70% lumen maintenance at 50,000 hours of operation. This
performance is based on independent test data, Lumileds historical data from
tests run on similar material systems, and internal Luxeon reliability testing. This
projection is based on constant current 350 mA operation per LED (700 mA 12
Up Flood, 1050 mA for 18Up Flood) with junction temperature maintained at or
below 90°C. Observation of design limits included in this data sheet is required
in order to achieve this projected lumen maintenance.
Luxeon Flood
7
Document #: DS24 (10/05)
About Luxeon
Luxeon is the new world of solid state lighting (LED) technology. Luxeon
Power Light Source Solutions offer huge advantages over conventional
lighting and huge advantages over other LED solutions. Luxeon enables
partners to create and market products that, until now, were impossible to
create. This means the opportunity to create products with a clear
competitive advantage in the market. Products that are smaller, lighter,
sleeker, cooler, and brighter. Products that are more fun to use, more
efficient, and more environmentally conscious than ever before possible!
Lumileds may make process
or materials changes affecting
the performance or other
characteristics of Luxeon.
These products supplied after
such change will continue to
meet published specifications,
but may not be identical to
products supplied as samples
or under prior orders.
Company Information
Luxeon is developed, manufactured and marketed by Lumileds Lighting,
LLC. Lumileds is a worldclass supplier of Light Emitting Diodes (LEDs)
producing billions of LEDs annually. Lumileds is a fully integrated
supplier, producing core LED material in all three base colors (Red,
Lumileds
www.luxeon.com
www.lumileds.com
Green, Blue) and White. Lumileds has R&D development centers in San
Jose, California and Best, The Netherlands. Production capabilities in
San Jose, California and Malaysia.
Lumileds is pioneering the highflux LED technology and bridging the gap
between solid state LED technology and the lighting world. Lumileds is
absolutely dedicated to bringing the best and brightest LED technology
to enable new applications and markets in the Lighting world.
2005 Lumileds Lighting. All rights reserved. Luxeon is a trademark of Lumileds Lighting, U.S., LLC.
Product specifications are subject to change without notice.
Luxeon Flood
8
Document #: DS24 (10/05)
For technical assistance or the
location of your nearest Lumileds
sales office, call:
Worldwide:
+1 408-435-6111
US Toll free: 1-888-589-3662
Asia: 800-5864-5337
Europe: 00 800 443 88 873
Fax: +1 408-435-6855
Email us at [email protected]
Lumileds Lighting, U.S., LLC
370 West Trimble Road
San Jose, CA 95131
Similar pages