GBJ10005 THRU GBJ1010 SINGLE PHASE 10.0AMP GLASS PASSIVATED BRIDGE RECTIFIER Features GBJ · Glass passivated die construction · Low forward voltage drop · High current capability .189(4.8) .173(4.4) 1.193(30.3) 1.169(29.7) · High surge current capability · Plastic material-UL flammability 94V-0 .215(5.2) .196(4.8) .800(20.3) + Mechanical Data ~ .106(2.7) .096(2.3) · Case: Moeded plastic, GBJ · Terminals: Plated Leads Solderable per · · · · .150(3.8) .134(3.4) ~ - .706(18.0) .626(16.0) .165(4.2) .150(3.8) .090(2.3) .078(2.0) MIL-STD-202, Method 208 Polarity: As Marked on Case Mounting Position: Any Marking: Type Number Lead Free: For RoHS / Lead Free Version .787(19.7) .441(11.2) .425(10.8) .043(1.1) .035(0.9) .433(11) .354(9.0) .110(2.8) .094(2.4) .184(3.4) .122(3.1) .023(0.6) .303(7.7) .287(7.3) .303(7.7) .287(7.3) dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ ambient temperature unless otherwise specified. Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER SYMBOL Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM RMS Reverse Voltage VRMS GBJ GBJ 10005 1001 GBJ GBJ 1002 1004 GBJ GBJ GBJ 1006 1008 1010 UNITS 50 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 V VDC IO Average Rectified Output Current (Note 1)@TA =90℃ A 10.0 Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 175 A @IF=5A @IF=10A VFM 1.0 1.1 V IR 5.0 500 uA CJ 55 pF Between junction and ambient, Without heatsink RθJA 14 Between junction and case, With heatsink RθJC 2.3 Forward Voltage per element Peak Reverse Current At Rated DC Blocking Voltage @TA =25 ℃ @TA =125 ℃ Typical Junction Capacitance per leg Operating and Storage Temperature Range TJ,TSTG ℃/W ℃ -55to+150 2 Note:1. Mounted on glass epoxy PC board with 1.3mm solder pad. version:01 1 of 2 www.sddydz.com AVERAGE FORWARD RECTIFIED CURRENT (A) GBJ10005 THRU GBJ1010 12.0 9.0 6.0 Single Phase Half Wave 60Hz Resistive or inductive Load with heatsink 3.0 0 150 100 50 200 Fig. 2 Typical Forward Characteristics (per leg) 30 3 0.3 0.03 0.4 I (AV), 0 IF, INSTANTANEOUS FORWARD CURRENT (A) Fig. 1 Output Current Derating Curve 240 210 180 150 120 90 TA = 25°C Single Half Sine-Wave Pulse Width = 8.3ms (JEDEC Method) 0 10 1 0.8 1.0 1.2 1.4 1.6 100 NUMBER OF CYCLES AT 60 Hz Fig. 4 Typical Junction Capacitance INSTANTANEOUS REVERSE CURRENT, MICROAMPERES IFSM, PEAK FORWARD SURGE CURRENT (A) Fig. 3 Maximum Peak Forward Surge Current (per leg) 30 0.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) TA, AMBIENT TEMPERATURE (°C) 60 TA= 25°C Pulse Width = 300 µs 10 1.0 T A=25°C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE FIG.5 TYPICAL REVERSE CHRACTERISTICS INVSTANTANEOUS REVERSE CURRENT (µA) 100 Tj=150℃ 10 1.0 Tj=25℃ 0.1 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK INVERSE VOLTGE (V) version:01 2 of 2 www.sddydz.com