DYELEC ABF2 Single phase 0.8amp surface mount glass passivated bridge rectifier Datasheet

ABF2 THRU ABF10
SINGLE PHASE 0.8AMP SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER
Features
·
·
·
·
·
·
Glass passivated die construction
Low forward voltage drop
High current capability
High surge current capability
Designed for surface mount application
Plastic material-UL flammability 94V-0
ABF
0.165(4.2)
0.150(3.8)
0.010(0.25)
0.006(0.15)
0.268(6.8)
0.236(6.0)
0.268(6.8)
0.236(6.0)
0.181(4.6)
0.165(4.2)
Mechanical Data
· Case: SOPA-4, molded plastic
· Terminals: plated leads solderable per
0.032(0.7)
0.024(0.5)
MAX 0.0078(0.2)
MIL-STD-202, Method 208
· Polarity: as marked on case
· Mounting position: Any
· Marking: type number
0.209(5.3)
0.189(4.8)
0.051(1.3)
0.039(1.0)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ ambient temperature unless otherwise specified.
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
SYMBOL
ABF2
ABF4
ABF6
ABF8
ABF10
UNITS
200
400
600
800
1000
V
140
280
420
560
700
V
VRRM
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRWM
RMS Reverse Voltage
VRMS
VDC
IO
0.5
0.8
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
(JEDEC Method)
IFSM
30
A
Forward Voltage per element
VFM
0.95
V
IR
5.0
500
uA
RθJA
62.5
RθJL
25
TJ,TSTG
-55to+150
Average Rectified Output Current (Note 1)@TA=30℃
(Note 2)@TA=30℃
Peak Reverse Current
At Rated DC Blocking Voltage
@IF=0.4A
@TA =25℃
@TA =125 ℃
Typical Thermal Resistance per leg (Note 3)
Operating and Storage Temperature Range
℃/W
℃
Note:1. Mounted on glass epoxy PC board with 1.3mm 2 solder pad.
2. Mounted on aluminum substrate PC board with 1.3mm 2 solder pad.
3. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
version:01
1 of 2
www.dyelec.com
ABF2 THRU ABF10
FIG.1 MAXIMUM FORWARD CURRENT DERATING
CURVE
10
INSTANTANEOUS FORWARD CURRENT (A)
AVERAGE FORWARD CURRENT (A)
1.2
FIG. 2 TYPICAL FORWARD CHARACTERISTIC
1.0
0.8
0.6
0.4
0.2
0
0
30
60
90
120
150
1
0.1
0
0.2
0.4
AMBIENT TEMPERATURE ( oC)
FIG. 3 MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
1.0
0.8
1.2
1.4
1.6
FIG. 4 TYPICAL REVERSE CHARACTERISTICS
100
50
8.3ms Single Half
Sine-Wave
40
30
20
10
1
10
NUMBER OF CYCLES AT 60 Hz
100
INSTANTANEOUS REVERSE CURRENT (uA)
PEAK FORWARD SURGE CURRENT (A)
0.6
FORWARD VOLTAGE (V)
TA=125℃
10
1
TA =75 ℃
0.1
TA =25 ℃
0.01
0
20
40
60
80
100
120
PERCENT OF RATED PEAK REVERSE VOLYAGE(%)
version:01
2 of 2
www.dyelec.com
140
Similar pages