Cypress CY2292SL-XXX Three-pll general-purpose eprom programmable clock generator Datasheet

CY2292
Three-PLL General-Purpose
EPROM Programmable Clock Generator
Features
Benefits
• Three integrated phase-locked loops
• EPROM programmability
• Generates up to three custom frequencies from
external sources
• Factory-programmable (CY2292) or field-programmable (CY2292F) device options
• Easy customization and fast turnaround
• Programming support available for all opportunities
• Low-skew, low-jitter, high-accuracy outputs
• Meets critical industry standard timing requirements
• Power-management options (Shutdown, OE, Suspend)
• Supports low-power applications
• Frequency select option
• Eight user-selectable frequencies on CPU PLL
• Smooth slewing on CPUCLK
• Allows downstream PLLs to stay locked on CPUCLK
output
• Configurable 3.3V or 5V operation
• Enables application compatibility
• 16-pin SOIC Package (TSSOP: F only)
• Industry-standard packaging saves on board space
Selector Guide
Part Number
Outputs
Input Frequency Range
Output Frequency Range
Specifics
CY2292
6
10 MHz–25 MHz (external crystal) 76.923 kHz–100 MHz (5V)
1 MHz–30 MHz (reference clock) 76.923 kHz–80 MHz (3.3V)
Factory Programmable
Commercial Temperature
CY2292I
6
10 MHz–25 MHz (external crystal) 76.923 kHz–90 MHz (5V)
1 MHz–30 MHz (reference clock) 76.923 kHz–66.6 MHz (3.3V)
Factory Programmable
Industrial Temperature
CY2292F
6
10 MHz–25 MHz (external crystal) 76.923 kHz–90 MHz (5V)
1 MHz–30 MHz (reference clock) 76.923 kHz–66.6 MHz (3.3V)
Field Programmable
Commercial Temperature
CY2292FI
6
10 MHz–25 MHz (external crystal) 76.923 kHz–80 MHz (5V)
1 MHz–30 MHz (reference clock) 76.923 kHz–60.0 MHz (3.3V)
Field Programmable
Industrial Temperature
CY2292FZ
6
10 MHz–25 MHz (external crystal) 76.923 kHz–90 MHz (5V)
1 MHz–30 MHz (reference clock) 76.923 kHz–66.6 MHz (3.3V)
Field Programmable
Commercial Temperature
Logic Block Diagram
.
XTALIN
OSC.
XTALOUT
XBUF
CPLL
(8 BIT)
/1,2,4
CPUCLK
S0
CLKA
S1
UPLL
(10 BIT)
SPLL
(8 BIT)
CLKB
/1,2,4,8
/1,2,3,4,5,6
/8,10,12,13
/20,24,26,40
/48,52,96,104
CLKC
CLKD
CONFIG
EPROM
SHUTDOWN/
OE
Cypress Semiconductor Corporation
Document #: 38-07449 Rev. *B
MUX
S2/SUSPEND
•
3901 North First Street
•
San Jose, CA 95134
•
408-943-2600
Revised October 12, 2004
CY2292
Pin Configurations
CY2292
16-pin SOIC
CLKC
1
16
VDD
GND
2
15
SHUTDOWN/OE
S2/SUSPEND
3
14
XTALIN
4
13
VDD
S1
XTALOUT
XBUF
5
12
6
11
S0
GND
CLKD
7
10
CLKA
CPUCLK
8
9
CLKB
Pin Summary
Name
CLKC
Pin Number
CY2292
1
Description
Configurable clock output C.
VDD
2, 14
Voltage supply.
GND
3, 11
Ground.
XTALIN[1]
4
Reference crystal input or external reference clock input.
XTALOUT[1, 2]
5
Reference crystal feedback.
XBUF
6
Buffered reference clock output.
CLKD
7
Configurable clock output D.
CPUCLK
8
CPU frequency clock output.
CLKB
9
Configurable clock output B.
CLKA
10
Configurable clock output A.
S0
12
CPU clock select input, bit 0.
S1
13
CPU clock select input, bit 1.
S2/SUSPEND
15
CPU clock select input, bit 2. Optionally enables suspend feature when LOW.[3]
SHUTDOWN/OE
16
Places outputs in three-state[4] condition and shuts down chip when LOW. Optionally, only
places outputs in three-state[4] condition and does not shut down chip when LOW.
Operation
The CY2292 is a third-generation family of clock generators.
The CY2292 is upwardly compatible with the industry standard
ICD2023 and ICD2028 and continues their tradition by
providing a high level of customizable features to meet the
diverse clock generation needs of modern motherboards and
other synchronous systems.
All parts provide a highly configurable set of clocks for PC
motherboard applications. Each of the four configurable clock
outputs (CLKA–CLKD) can be assigned 1 of 30 frequencies in
any combination. Multiple outputs configured for the same or
related[3] frequencies will have low (≤ 500 ps) skew, in effect
providing on-chip buffering for heavily loaded signals.
The CY2292 can be configured for either 5V or 3.3V operation.
The internal ROM tables use EPROM technology, allowing full
customization of output frequencies. The reference oscillator
has been designed for 10-MHz to 25-MHz crystals, providing
additional flexibility. No external components are required with
this crystal. Alternatively, an external reference clock of
frequency between 1 MHz and 30 MHz can be used.
Output Configuration
The CY2292 has four independent frequency sources on-chip.
These are the reference oscillator, and three Phase-Locked
Loops (PLLs). Each PLL has a specific function. The System
PLL (SPLL) provides fixed output frequencies on the configurable outputs. The SPLL offers the most output frequency
divider options. The CPU PLL (CPLL) is controlled by the
select inputs (S0–S2) to provide eight user-selectable
frequencies with smooth slewing between frequencies. The
Utility PLL (UPLL) provides the most accurate clock. It is often
used for miscellaneous frequencies not provided by the other
frequency sources.
All configurations are EPROM programmable, providing short
sample and production lead times. Please refer to the application note Understanding the CY2291, CY2292, and CY2295
for information on configuring the part.
Notes:
1. For best accuracy, use a parallel-resonant crystal, CLOAD ≈ 17 pF or 18 pF.
2. Float XTALOUT pin if XTALIN is driven by reference clock (as opposed to crystal).
3. Please refer to application note “Understanding the CY2291, CY2292 and CY2295” for more information.
4. The CY2292 has weak pull-downs on all outputs. Hence, when a three-state condition is forced on the outputs, the output pins are pulled LOW.
Document #: 38-07449 Rev. *B
Page 2 of 11
CY2292
Power-Saving Features
The SHUTDOWN/OE input three-states the outputs when
pulled LOW. If system shutdown is enabled, a LOW on this pin
also shuts off the PLLs, counters, the reference oscillator, and
all other active components. The resulting current on the VDD
pins will be less than 50 µA (for commercial temperature or
100 µA for industrial temperature). After leaving shutdown
mode, the PLLs will have to relock. All outputs have a weak
pull-down so that the outputs do not float when three-stated.[4]
The S2/SUSPEND input can be configured to shut down a
customizable set of outputs and/or PLLs, when LOW. All PLLs
and any of the outputs can be shut off in nearly any combination. The only limitation is that if a PLL is shut off, all outputs
derived from it must also be shut off. Suspending a PLL shuts
off all associated logic, while suspending an output simply
forces a three-state condition.[3]
The CPUCLK can slew (transition) smoothly between 20 MHz
and the maximum output frequency (100 MHz at 5V/80 MHz
at 3.3V for Commercial Temp. parts or 90 MHz at 5V/66.6 MHz
at 3.3V for Industrial Temp. and for field-programmed parts).
This feature is extremely useful in “Green” PC and laptop
applications, where reducing the frequency of operation can
result in considerable power savings. This feature meets all
486 and Pentium® processor slewing requirements.
CyClocks Software
CyClocks is an easy-to-use application that allows you to
configure any one of the EPROM-programmable clocks
offered by Cypress. You may specify the input frequency, PLL
and output frequencies, and different functional options.
Please note the output frequency ranges in this data sheet
when specifying them in CyClocks to ensure that you stay
within the limits. CyClocks also has a power calculation feature
that allows you to see the power consumption of your specific
Document #: 38-07449 Rev. *B
configuration. You can download a copy of CyClocks for free
on Cypress’s web site at www.cypress.com.
Cypress FTG Programmer
The Cypress Frequency Timing Generator (FTG) Programmer
is a portable programmer designed to custom program our
family of EPROM Field Programmable Clock Devices. The
FTG programmers connect to a PC serial port and allow users
of CyClocks software to quickly and easily program any of the
CY2291F, CY2292F, CY2071AF, and CY2907F devices. The
ordering code for the Cypress FTG Programmer is CY3670.
Custom Configuration Request Procedure
The CY229x are EPROM-programmable devices that may be
configured in the factory or in the field by a Cypress Field Application Engineer (FAE). The output frequencies requested will
be matched as closely as the internal PLL divider and multiplier options allow. All custom requests must be submitted to
your local Cypress FAE or sales representative. The method
to use to request custom configurations is:
Use CyClocks software. This software automatically calculates the output frequencies that can be generated by the
CY229x devices and provides a print-out of final pinout which
can be submitted (in electronic or print format) to your local
FAE or sales representative. The CyClocks software is
available free of charge from the Cypress web site
(http://www.cypress.com) or from your local sales representative.
Once the custom request has been processed you will receive
a part number with a 3-digit extension (e.g., CY2292SC-128)
specific to the frequencies and pinout of your device. This will
be the part number used for samples requests and production
orders.
Page 3 of 11
CY2292
Maximum Ratings
Storage Temperature ................................. –65°C to +150°C
Max. Soldering Temperature (10 sec) ......................... 260°C
(Above which the useful life may be impaired. For user guidelines, not tested.)
Junction Temperature .................................................. 150°C
Supply Voltage ............................................... –0.5V to +7.0V
Package Power Dissipation...................................... 750 mW
DC Input Voltage............................................ –0.5V to +7.0V
Static Discharge Voltage.............................................≤ 2000V
(per MIL-STD-883, Method 3015)
Operating Conditions[5]
Parameter
Description
Min.
Max.
Unit
All
4.5
5.5
V
Supply Voltage, 3.3V operation
All
3.0
3.6
V
Commercial Operating Temperature, Ambient
CY2292/CY2292F
0
+70
°C
−40
+85
°C
25
pF
VDD
Supply Voltage, 5.0V operation
VDD
TA
Part Numbers
Industrial Operating Temperature, Ambient
CY2292I/CY2292FI
CLOAD
Max. Load Capacitance 5.0V Operation
All
CLOAD
Max. Load Capacitance 3.3V Operation
All
15
pF
fREF
External Reference Crystal
All
10.0
25.0
MHz
External Reference Clock[6, 7, 8]
All
1
30
MHz
Electrical Characteristics, Commercial 5.0V
Parameter
Description
Conditions
VOH
HIGH-Level Output Voltage
IOH = 4.0 mA
Min. Typ. Max.
2.4
V
VOL
LOW-Level Output Voltage
IOL = 4.0 mA
VIH
HIGH-Level Input Voltage[9]
Except crystal pins
VIL
LOW-Level Input Voltage[9]
Except crystal pins
IIH
Input HIGH Current
VIN = VDD – 0.5V
<1
IIL
Input LOW Current
VIN = +0.5V
<1
IOZ
Output Leakage Current
Three-state outputs
Current[10] Commercial
IDD
VDD Supply
IDDS
VDD Power Supply Current in Shutdown Mode[10] Shutdown active CY2292/CY2292F
0.4
2.0
VDD = VDD max., 5V operation
Unit
V
V
0.8
V
10
µA
10
µA
250
µA
75
100
mA
10
50
µA
Max.
Unit
Electrical Characteristics, Commercial 3.3V
Parameter
Description
Conditions
VOH
HIGH-Level Output Voltage
IOH = 4.0 mA
VOL
LOW-Level Output Voltage
IOL = 4.0 mA
VIH
HIGH-Level Input Voltage[9]
Except crystal pins
[9]
Min.
Typ.
2.4
V
0.4
2.0
V
VIL
LOW-Level Input Voltage
IIH
Input HIGH Current
VIN = VDD – 0.5V
<1
<1
Except crystal pins
IIL
Input LOW Current
VIN = +0.5V
IOZ
Output Leakage Current
Three-state outputs
IDD
VDD Supply Current[10] Commercial
VDD = VDD Max., 3.3V operation
IDDS
VDD Power Supply Current in Shutdown Mode[10] Shutdown active CY2292/CY2292F
V
0.8
V
10
µA
10
µA
250
µA
50
65
mA
10
50
µA
Notes:
5. Electrical parameters are guaranteed by design with these operating conditions, unless otherwise noted.
6. External input reference clock must have a duty cycle between 40% and 60%, measured at VDD/2.
7. Please refer to application note “Crystal Oscillator Topics” for information on AC-coupling the external input reference clock.
8. The oscillator circuit is optimized for a crystal reference and for external reference clocks up to 20 MHz. For external reference clocks above 20 MHz, it is
recommended that a 150Ω pull-up resistor to VDD be connected to the Xout pin.
9. Xtal inputs have CMOS thresholds.
10. Load = Max., VIN = 0V or VDD, Typical (–104) configuration, CPUCLK = 66 MHz. Other configurations will vary. Power can be approximated by the following
formula (multiply by 0.65 for 3V operation): IDD=10+0.06•(FCPLL+FUPLL+2•FSPLL)+0.27•(FCLKA+FCLKB+FCLKC+FCLKD+FCPUCLK+FXBUF).
Document #: 38-07449 Rev. *B
Page 4 of 11
CY2292
Electrical Characteristics, Industrial 5.0V
Parameter
Description
Conditions
VOH
HIGH-Level Output Voltage
IOH = 4.0 mA
VOL
LOW-Level Output Voltage
IOL = 4.0 mA
VIH
HIGH-Level Input Voltage[9]
Except crystal pins
VIL
LOW-Level Input Voltage[9]
Except crystal pins
Min.
Typ.
Max.
Unit
0.4
V
2.4
V
2.0
V
0.8
V
IIH
Input HIGH Current
VIN = VDD – 0.5V
<1
10
µA
IIL
Input LOW Current
VIN = +0.5V
<1
10
µA
IOZ
Output Leakage Current
Three-state outputs
250
µA
IDD
VDD Supply Current[10] Industrial
VDD = VDD Max., 5V operation
75
110
mA
IDDS
VDD Power Supply Current in
Shutdown Mode[10]
Shutdown active CY2292I/CY2292FI
10
100
µA
Typ.
Max.
Unit
Electrical Characteristics, Industrial 3.3V
Parameter
Description
Conditions
VOH
HIGH-Level Output Voltage
IOH = 4.0 mA
Min.
2.4
V
VOL
LOW-Level Output Voltage
IOL = 4.0 mA
VIH
HIGH-Level Input Voltage[9]
Except crystal pins
VIL
LOW-Level Input Voltage[9]
Except crystal pins
IIH
Input HIGH Current
VIN = VDD – 0.5V
<1
IIL
Input LOW Current
VIN = +0.5V
<1
IOZ
Output Leakage Current
Three-state outputs
IDD
VDD Supply Current[10] Industrial
VDD = VDD Max., 3.3V operation
IDDS
VDD Power Supply Current in
Shutdown Mode[10]
Shutdown active
0.4
2.0
V
V
CY2292I/CY2292FI
0.8
V
10
µA
10
µA
250
µA
50
70
mA
10
100
µA
Switching Characteristics, Commercial 5.0V
Parameter
t1
Name
Output Period
Output Duty Cycle[11]
Description
Clock output range, 5V
operation
Min.
Typ.
Max.
Unit
CY2292
10
(100 MHz)
13000
(76.923 kHz)
ns
CY2292F
11.1
(90 MHz)
13000
(76.923 kHz)
ns
Duty cycle for outputs, defined as t2 ÷ t1[12]
fOUT > 66 MHz
40%
50%
60%
Duty cycle for outputs, defined as t2 ÷ t1[12]
fOUT < 66 MHz
45%
50%
55%
t3
Rise Time
Output clock rise time[13]
3
5
ns
t4
Fall Time
Output clock fall time[13]
2.5
4
ns
t5
Output Disable Time
Time for output to enter three-state mode
after SHUTDOWN/OE goes LOW
10
15
ns
t6
Output Enable Time
Time for output to leave three-state mode
after SHUTDOWN/OE goes HIGH
10
15
ns
t7
Skew
Skew delay between any identical or
related outputs[3, 12, 14]
< 0.25
0.5
ns
CPUCLK Slew
Frequency transition rate
1.0
20.0
MHz/ms
t8
Notes:
11. XBUF duty cycle depends on XTALIN duty cycle.
12. Measured at 1.4V.
13. Measured between 0.4V and 2.4V.
14. Jitter varies with configuration. All standard configurations sample tested at the factory conform to this limit. For more information on jitter, please refer to the
application note: Jitter in PLL-Based Systems.
Document #: 38-07449 Rev. *B
Page 5 of 11
CY2292
Switching Characteristics, Commercial 5.0V (continued)
Typ.
Max.
Unit
t9A
Parameter
Clock Jitter[14]
Name
Peak-to-peak period jitter (t9A max. – t9A
min.), % of clock period (fOUT < 4 MHz)
<0.5
1
%
t9B
Clock Jitter[14]
Peak-to-peak period jitter (t9B max. – t9B
min.)
(4 MHz < fOUT < 16 MHz)
<0.7
1
ns
t9C
Clock Jitter[14]
Peak-to-peak period jitter (16 MHz < fOUT <
50 MHz)
<400
500
ps
t9D
Clock Jitter[14]
Peak-to-peak period jitter (fOUT > 50 MHz)
<250
350
ps
t10A
Lock Time for CPLL
Lock Time from Power-up
<25
50
ms
t10B
Lock Time for UPLL and Lock Time from Power-up
SPLL
<0.25
1
ms
Slew Limits
Description
CPU PLL Slew Limits
Min.
CY2292
20
100
MHz
CY2292F
20
90
MHz
Switching Characteristics, Commercial 3.3V
Parameter
t1
Name
Output Period
Description
Clock output range, 3.3V
operation
CY2292
CY2292F
Output Duty
Cycle[11]
t3
Rise Time
Min.
Max.
Unit
12.5
(80 MHz)
Typ.
13000
(76.923 kHz)
ns
15
(66.6 MHz)
13000
(76.923 kHz)
ns
Duty cycle for outputs, defined as t2 ÷ t1[12]
fOUT > 66 MHz
40%
50%
60%
Duty cycle for outputs, defined as t2 ÷ t1[12]
fOUT < 66 MHz
45%
50%
55%
3
5
Output clock rise time[13]
time[13]
ns
t4
Fall Time
Output clock fall
2.5
4
ns
t5
Output Disable
Time
Time for output to enter three-state mode after
SHUTDOWN/OE goes LOW
10
15
ns
t6
Output Enable
Time
Time for output to leave three-state mode after
SHUTDOWN/OE goes HIGH
10
15
ns
t7
Skew
Skew delay between any identical or related
outputs[3, 12, 14]
< 0.25
0.5
ns
t8
CPUCLK Slew
Frequency transition rate
20.0
MHz/
ms
t9A
Clock Jitter[14]
Peak-to-peak period jitter (t9A max. – t9A min.),
% of clock period (fOUT < 4 MHz)
< 0.5
1
%
t9B
Clock Jitter[14]
Peak-to-peak period jitter (t9B max. – t9B min.)
(4 MHz < fOUT < 16 MHz)
< 0.7
1
ns
t9C
Clock Jitter[14]
Peak-to-peak period jitter (16 MHz < fOUT < 50 MHz)
< 400
500
ps
Jitter[14]
Peak-to-peak period jitter (fOUT > 50 MHz)
< 250
350
ps
< 25
50
ms
< 0.25
1
ms
t9D
Clock
t10A
Lock Time for CPLL Lock Time from Power-up
t10B
Lock Time for
UPLL and SPLL
Lock Time from Power-up
Slew Limits
CPU PLL Slew Limits
Document #: 38-07449 Rev. *B
1.0
CY2292
20
80
MHz
CY2292F
20
66.6
MHz
Page 6 of 11
CY2292
Switching Characteristics, Industrial 5.0V
Parameter
t1
Name
Output Period
Output Duty
Cycle[11]
Description
Clock output range, 5V
operation
Min.
Typ.
Max.
Unit
CY2292I
11.1
(90 MHz)
13000
(76.923 kHz)
ns
CY2292FI
12.5
(80 MHz)
13000
(76.923 kHz)
ns
Duty cycle for outputs, defined as t2 ÷ t1[12]
fOUT > 66 MHz
40%
50%
60%
Duty cycle for outputs, defined as t2 ÷ t1[12]
fOUT < 66 MHz
45%
50%
55%
t3
Rise Time
Output clock rise time[13]
3
5
ns
t4
Fall Time
Output clock fall time[13]
2.5
4
ns
t5
Output Disable
Time
Time for output to enter three-state mode after
SHUTDOWN/OE goes LOW
10
15
ns
t6
Output Enable
Time
Time for output to leave three-state mode after
SHUTDOWN/OE goes HIGH
10
15
ns
t7
Skew
Skew delay between any identical or related
outputs[3, 12, 14]
< 0.25
0.5
ns
t8
CPUCLK Slew
Frequency transition rate
20.0
MHz/
ms
t9A
Clock Jitter[14]
Peak-to-peak period jitter (t9A max. – t9A min.), %
of clock period (fOUT < 4 MHz)
< 0.5
1
%
t9B
Clock Jitter[14]
Peak-to-peak period jitter (t9B max. – t9B min.) (4
MHz < fOUT < 16 MHz)
< 0.7
1
ns
t9C
Clock Jitter[14]
Peak-to-peak period jitter (16 MHz < fOUT < 50 MHz)
< 400
500
ps
t9D
Clock Jitter[14]
Peak-to-peak period jitter (fOUT > 50 MHz)
< 250
350
ps
t10A
Lock Time for CPLL Lock Time from Power-up
<25
50
ms
t10B
Lock Time for
UPLL and SPLL
Lock Time from Power-up
<0.25
1
ms
Slew Limits
CPU PLL Slew Limits
1.0
CY2292I
20
90
MHz
CY2292FI
20
80
MHz
Switching Characteristics, Industrial 3.3V
Parameter
t1
Name
Output Period
Description
Clock output range, 3.3V CY2292I
operation
CY2292FI
Output Duty
Cycle[11]
Min.
Typ.
Max.
Unit
15
(66.6 MHz)
13000
(76.923 kHz)
ns
16.66
(60 MHz)
13000
(76.923 kHz)
ns
Duty cycle for outputs, defined as t2 ÷ t1[12]
fOUT > 66 MHz
40%
50%
60%
Duty cycle for outputs, defined as t2 ÷ t1[12]
fOUT < 66 MHz
45%
50%
55%
t3
Rise Time
Output clock rise time[13]
3
5
ns
t4
Fall Time
Output clock fall time[13]
2.5
4
ns
t5
Output Disable
Time
Time for output to enter three-state mode after
SHUTDOWN/OE goes LOW
10
15
ns
t6
Output Enable
Time
Time for output to leave three-state mode after
SHUTDOWN/OE goes HIGH
10
15
ns
t7
Skew
Skew delay between any identical or related
outputs[3, 12, 14]
< 0.25
0.5
ns
t8
CPUCLK Slew
Frequency transition rate
20.0
MHz/ms
Document #: 38-07449 Rev. *B
1.0
Page 7 of 11
CY2292
Switching Characteristics, Industrial 3.3V (continued)
Typ.
Max.
Unit
t9A
Parameter
Clock Jitter[14]
Name
Peak-to-peak period jitter (t9A max. – t9A min.),
% of clock period (fOUT < 4 MHz)
Description
Min.
< 0.5
1
%
t9B
Clock Jitter[14]
Peak-to-peak period jitter (t9B max. – t9B min.)
(4 MHz < fOUT < 16 MHz)
< 0.7
1
ns
t9C
Clock Jitter[14]
Peak-to-peak period jitter
(16 MHz < fOUT < 50 MHz)
< 400
500
ps
t9D
Clock Jitter[14]
Peak-to-peak period jitter
(fOUT > 50 MHz)
< 250
350
ps
t10A
Lock Time for
CPLL
Lock Time from Power-up
< 25
50
ms
t10B
Lock Time for
UPLL and SPLL
Lock Time from Power-up
< 0.25
1
ms
Slew Limits
CPU PLL Slew Limits
CY2292I
20
66.6
MHz
CY2292FI
20
60
MHz
Switching Waveforms
All Outputs, Duty Cycle and Rise/Fall Time
t1
t2
OUTPUT
t3
t4
Output Three-State Timing[4]
OE
t5
t6
ALL
THREE-STATE
OUTPUTS
CLK Outputs Jitter and Skew
t9A
CLK
OUTPUT
t7
RELATED
CLK
CPU Frequency Change
SELECT
OLD SELECT
Fold
NEW SELECT STABLE
t8 & t10
Fnew
CPU
Document #: 38-07449 Rev. *B
Page 8 of 11
CY2292
Test Circuit
VDD
CLK out
0.1 µF
CLOAD
OUTPUTS
VDD
0.1 µF
GND
Package Characteristics
Package
θJA (C/W)
θJC (C/W)
Transistor Count
16-pin SOIC
83
19
9271
Ordering Information
Ordering Code
Package Type
Operating Range
Operating Voltage
CY2292SC–XXX
16-Pin SOIC
Commercial
5.0V
CY2292SC–XXXT
16-Pin SOIC – Tape and Reel
Commercial
5.0V
CY2292SL–XXX
16-Pin SOIC
Commercial
3.3V
CY2292SL–XXXT
16-Pin SOIC – Tape and Reel
Commercial
3.3V
CY2292F
16-Pin SOIC
Commercial
3.3V or 5.0V
CY2292FT
16-Pin SOIC – Tape and Reel
Commercial
3.3V or 5.0V
CY2292SI–XXX
16-Pin SOIC
Industrial
3.3V or 5.0V
CY2292SI–XXXT
16-Pin SOIC – Tape and Reel
Industrial
3.3V or 5.0V
CY2292FI
16-Pin SOIC
Industrial
3.3V or 5.0V
CY2292FIT
16-Pin SOIC – Tape and Reel
Industrial
3.3V or 5.0V
CY2292FZ
16-Pin TSSOP
Commercial
3.3V or 5.0V
CY2292FZT
16-Pin SOIC – Tape and Reel
Commercial
3.3V or 5.0V
16-Pin SOIC
Commercial
5.0V
Lead-Free
CY2292SXC–XXX
CY2292SXC–XXXT
16-Pin SOIC – Tape and Reel
Commercial
5.0V
CY2292SXL–XXX
16-Pin SOIC
Commercial
3.3V
CY2292SXL–XXXT
16-Pin SOIC – Tape and Reel
Commercial
3.3V
CY2292FXC
16-Pin SOIC
Commercial
3.3V or 5.0V
CY2292FXCT
16-Pin SOIC – Tape and Reel
Commercial
3.3V or 5.0V
CY2292SXI–XXX
16-Pin SOIC
Industrial
3.3V or 5.0V
CY2292SXI–XXXT
16-Pin SOIC – Tape and Reel
Industrial
3.3V or 5.0V
CY2292FXI
16-Pin SOIC
Industrial
3.3V or 5.0V
CY2292FXIT
16-Pin SOIC – Tape and Reel
Industrial
3.3V or 5.0V
CY2292FZX
16-Pin TSSOP
Commercial
3.3V or 5.0V
CY2292FZXT
16-Pin SOIC – Tape and Reel
Commercial
3.3V or 5.0V
Document #: 38-07449 Rev. *B
Page 9 of 11
CY2292
Package Diagrams
16 Lead (150 Mil) SOIC
16-Lead (150-Mil) SOIC S16.15
PIN 1 ID
8
1
DIMENSIONS IN INCHES[MM] MIN.
MAX.
REFERENCE JEDEC MS-012
PACKAGE WEIGHT 0.15gms
0.150[3.810]
0.157[3.987]
0.230[5.842]
0.244[6.197]
PART #
S16.15 STANDARD PKG.
9
SZ16.15 LEAD FREE PKG.
16
0.386[9.804]
0.393[9.982]
0.010[0.254]
0.016[0.406]
SEATING PLANE
X 45°
0.061[1.549]
0.068[1.727]
0.004[0.102]
0.050[1.270]
BSC
0.016[0.406]
0.035[0.889]
0°~8°
0.0138[0.350]
0.0192[0.487]
0.004[0.102]
0.0098[0.249]
0.0075[0.190]
0.0098[0.249]
51-85068-*B
16-lead TSSOP 4.40 MM Body Z16.173
PIN 1 ID
DIMENSIONS IN MM[INCHES] MIN.
MAX.
1
REFERENCE JEDEC MO-153
6.25[0.246]
6.50[0.256]
PACKAGE WEIGHT 0.05 gms
PART #
4.30[0.169]
4.50[0.177]
Z16.173
STANDARD PKG.
ZZ16.173 LEAD FREE PKG.
16
0.65[0.025]
BSC.
0.19[0.007]
0.30[0.012]
1.10[0.043] MAX.
0.25[0.010]
BSC
GAUGE
PLANE
0°-8°
0.076[0.003]
0.85[0.033]
0.95[0.037]
4.90[0.193]
5.10[0.200]
0.05[0.002]
0.15[0.006]
SEATING
PLANE
0.50[0.020]
0.70[0.027]
0.09[[0.003]
0.20[0.008]
51-85091-*A
CyClocks is a trademark of Cypress Semiconductor Corporation.Pentium is a registered trademark of Intel Corporation.
All product and company names mentioned in this document may be the trademarks of their respective holders.
Document #: 38-07449 Rev. *B
Page 10 of 11
© Cypress Semiconductor Corporation, 2004. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use
of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be
used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its
products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress
products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.
CY2292
Document History Page
Document Title: CY2292 Three-PLL General-Purpose EPROM Programmable Clock Generator
Document Number: 38-07449
REV.
ECN NO.
Issue Date
Orig. of
Change
Description of Change
**
116993
07/01/02
DSG
Changed from Spec number: 38-00946 to 38-07449
*A
119639
12/05/02
CKN
Changed 8 MHz to 20 MHz in Power-saving Features
*B
277130
See ECN
RGL
Added Lead-free Devices
Document #: 38-07449 Rev. *B
Page 11 of 11
Similar pages