Renesas HD74LV1G32A 2-input or gate Datasheet

HD74LV1G32A
2–input OR Gate
REJ03D0068–0600Z
(Previous ADE-205-321D (Z))
Rev.6.00
Aug.29.2003
Description
The HD74LV1G32A has two–input OR gate in a 5 pin package. Low voltage and high-speed operation is
suitable for the battery powered products (e.g., notebook computers), and the low power consumption
extends the battery life.
Features
• The basic gate function is lined up as Renesas uni logic series.
• Supplied on emboss taping for high-speed automatic mounting.
• Electrical characteristics equivalent to the HD74LV32A
Supply voltage range : 1.65 to 5.5 V
Operating temperature range : –40 to +85°C
• All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V)
All outputs VO (Max.) = 5.5 V (@VCC = 0 V)
• Output current ±6 mA (@VCC = 3.0 V to 3.6 V), ±12 mA (@VCC = 4.5 V to 5.5 V)
• All the logical input has hysteresis voltage for the slow transition.
• Ordering Information
Part Name
Package Type
Package Code
Package
Abbreviation
Taping Abbreviation
(Quantity)
HD74LV1G32ACME CMPAK–5 pin
CMPAK–5V
CM
E (3,000 pcs/reel)
HD74LV1G32AVSE
TNP–5DV
CMPAK–5V(O)
VSON–5 pin
VS
Note: Please consult the sales office for the above package availability.
Rev.6.00, Aug.29.2003, page 1 of 10
HD74LV1G32A
Outline and Article Indication
• HD74LV1G32A
Index band
Marking
L
4
= Control code
CMPAK–5
• HD74LV1G32A
Marking
L
VSON–5
Rev.6.00, Aug.29.2003, page 2 of 10
4
= Control code
HD74LV1G32A
Function Table
Inputs
Output Y
A
B
L
L
L
H
L
H
L
H
H
H
H
H
H : High level
L : Low level
Pin Arrangement
IN B
1
IN A
2
GND
3
(Top view)
Rev.6.00, Aug.29.2003, page 3 of 10
5
VCC
4
OUT Y
HD74LV1G32A
Absolute Maximum Ratings
Item
Symbol
Ratings
Unit
Supply voltage range
VCC
–0.5 to 7.0
V
Input voltage range *1
VI
–0.5 to 7.0
V
VO
–0.5 to VCC + 0.5
V
Output voltage range
*1, 2
–0.5 to 7.0
Test Conditions
Output : H or L
VCC : OFF
Input clamp current
IIK
–20
mA
VI < 0
Output clamp current
IOK
±50
mA
VO < 0 or VO > VCC
Continuous output current
IO
±25
mA
VO = 0 to VCC
Continuous current through
VCC or GND
ICC or IGND
±50
mA
Maximum power dissipation
*3
at Ta = 25°C (in still air)
PT
200
mW
Storage temperature
Tstg
–65 to 150
°C
Notes:
The absolute maximum ratings are values, which must not individually be exceeded, and
furthermore no two of which may be realized at the same time.
1. The input and output voltage ratings may be exceeded if the input and output clamp-current
ratings are observed.
2. This value is limited to 5.5 V maximum.
3. The maximum package power dissipation was calculated using a junction temperature of 150°C.
Rev.6.00, Aug.29.2003, page 4 of 10
HD74LV1G32A
Recommended Operating Conditions
Item
Symbol
Min
Max
Unit
Supply voltage range
VCC
1.65
5.5
V
Input voltage range
VI
0
5.5
V
Output voltage range
VO
0
VCC
V
Output current
IOL
—
1
mA
—
2
VCC = 2.3 to 2.7 V
—
6
VCC = 3.0 to 3.6 V
—
12
VCC = 4.5 to 5.5 V
—
–1
VCC = 1.65 to 1.95 V
—
–2
VCC = 2.3 to 2.7 V
—
–6
VCC = 3.0 to 3.6 V
—
–12
VCC = 4.5 to 5.5 V
0
300
0
200
VCC = 2.3 to 2.7 V
IOH
Input transition rise or fall rate ∆t / ∆v
Operating free-air temperature Ta
VCC = 1.65 to 1.95 V
VCC = 1.65 to 1.95 V
0
100
VCC = 3.0 to 3.6 V
0
20
VCC = 4.5 to 5.5 V
–40
85
Note: Unused or floating inputs must be held high or low.
Rev.6.00, Aug.29.2003, page 5 of 10
ns / V
Conditions
°C
HD74LV1G32A
Electrical Characteristic
• Ta = –40 to 85°C
Item
Symbol VCC (V) *
Input voltage
VIH
VIL
Hysteresis voltage VH
Output voltage
VOH
VOL
Min
Typ
1.65 to 1.95 VCC×0.75 —
Max
Unit
—
V
Test condition
2.3 to 2.7
VCC×0.7
—
—
3.0 to 3.6
VCC×0.7
—
—
4.5 to 5.5
VCC×0.7
—
—
1.65 to 1.95 —
—
VCC×0.25
2.3 to 2.7
—
—
VCC×0.3
3.0 to 3.6
—
—
VCC×0.3
4.5 to 5.5
—
—
VCC×0.3
1.8
—
0.25
—
2.5
—
0.30
—
3.3
—
0.35
—
5.0
—
0.45
—
Min to Max
VCC–0.1
—
—
1.65
1.4
—
—
IOH = –1 mA
2.3
2.0
—
—
IOH = –2 mA
3.0
2.48
—
—
IOH = –6 mA
4.5
3.8
—
—
IOH = –12 mA
Min to Max
—
—
0.1
IOL = 50 µA
1.65
—
—
0.3
IOL = 1 mA
2.3
—
—
0.4
IOL = 2 mA
3.0
—
—
0.44
IOL = 6 mA
4.5
—
—
0.55
IOL = 12 mA
V
VT+ – VT–
V
IOH = –50 µA
Input current
IIN
0 to 5.5
—
—
±1
µA
VIN = 5.5 V or GND
Quiescent
supply current
ICC
5.5
—
—
10
µA
VIN = VCC or GND,
IO = 0
Output leakage
current
IOFF
0
—
—
5
µA
VIN or VO = 0 to 5.5 V
3.3
—
2.5
—
pF
VIN = VCC or GND
Input capacitance CIN
Note: For conditions shown as Min or Max, use the appropriate values under recommended operating
conditions.
Rev.6.00, Aug.29.2003, page 6 of 10
HD74LV1G32A
Switching Characteristics
• VCC = 1.8 ± 0.15 V
Item
Propagation
delay time
Symbol
tPLH
tPHL
Ta = 25°C
Ta = –40 to 85°C Unit Test
Min
Typ
Max
Min
Max
—
12.3
22.5
1.0
25.0
—
17.7
31.0
1.0
34.0
ns
FROM
Conditions (Input)
TO
(Output)
CL = 15 pF
Y
A or B
CL = 50 pF
• VCC = 2.5 ± 0.2 V
Item
Propagation
delay time
Symbol
tPLH
tPHL
Ta = 25°C
Ta = –40 to 85°C Unit Test
Min
Typ
Max
Min
Max
—
7.1
12.8
1.0
15.0
—
9.6
16.2
1.0
19.0
ns
FROM
Conditions (Input)
TO
(Output)
CL = 15 pF
Y
A or B
CL = 50 pF
• VCC = 3.3 ± 0.3 V
Item
Propagation
delay time
Symbol
tPLH
tPHL
Ta = 25°C
Ta = –40 to 85°C Unit Test
Min
Typ
Max
Min
Max
—
5.0
7.9
1.0
9.5
—
6.9
11.4
1.0
13.0
ns
FROM
Conditions (Input)
TO
(Output)
CL = 15 pF
Y
A or B
CL = 50 pF
• VCC = 5.0 ± 0.5 V
Item
Propagation
delay time
Symbol
tPLH
tPHL
Ta = 25°C
Ta = –40 to 85°C Unit Test
Min
Typ
Max
Min
Max
—
3.6
5.5
1.0
6.5
—
4.9
7.5
1.0
8.5
FROM
Conditions (Input)
ns
CL = 15 pF
A or B
TO
(Output)
Y
CL = 50 pF
Operating Characteristics
• CL = 50 pF
Item
Power dissipation
capacitance
Symbol
CPD
VCC (V) Ta = 25°C
Min
Typ
Max
3.3
—
9.5
—
5.0
—
11.5
—
Rev.6.00, Aug.29.2003, page 7 of 10
Unit
Test Conditions
pF
f = 10 MHz
HD74LV1G32A
Test Circuit
VCC
Input
Pulse
generator
Output
50 Ω
CL
Note: CL includes probe and jig capacitance.
• Waveforms
tr
tf
90%
Input
VCC
90%
50%
50%
10%
10%
GND
VOH
Output
50%
t PLH
50%
t PHL
VOL
Notes: 1. Input waveform : PRR ≤ 1 MHz, Zo = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns.
2. The output are measured one at a time with one transition per measurement.
Rev.6.00, Aug.29.2003, page 8 of 10
HD74LV1G32A
Package Dimensions
(0.65)
1.25 ± 0.1
(0.65)
0 – 0.1
(0.2)
2.0 ± 0.2
0.9 ± 0.1
(0.425)
5 – 0.2 ± 0.05
+ 0.1
0.15– 0.05
2.1 ± 0.3
1.3 ± 0.2
(0.425)
Unit: mm
Package Code
JEDEC
JEITA
Mass (reference value)
CMPAK–5V
—
Conforms
0.006 g
Unit: mm
(1.3)
(0.65)
(2.1)
0.15 ± 0.05
1.3 ± 0.05*
(0.65)
0.025 – 0.1
+ 0.1
5 – 0.2 – 0.05
* The value does not include Resin Bar.
(One side: 0.15 mm (max))
Rev.6.00, Aug.29.2003, page 9 of 10
0.88
(0.1)
+ 0.02
– 0.03
2.0 ± 0.1*
Package Code
JEDEC
JEITA
Mass (reference value)
CMPAK–5V(O)
—
Conforms
0.006 g
HD74LV1G32A
Unit: mm
1.6 ± 0.05
+0.1
(0.1)
0.5
+0.1
0.12 –0.05
1.0 ± 0.1
0.6 MAX
0.5
(0.1)
1.2 ± 0.1
0.2
1.6 ± 0.05
0.2
5 – 0.2 –0.05
Package Code
JEDEC
JEITA
Mass (reference value)
Rev.6.00, Aug.29.2003, page 10 of 10
TNP–5DV


0.002 g
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
http://www.renesas.com
RENESAS SALES OFFICES
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501
Renesas Technology Europe Limited.
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom
Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900
Renesas Technology Europe GmbH
Dornacher Str. 3, D-85622 Feldkirchen, Germany
Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11
Renesas Technology Hong Kong Ltd.
7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2375-6836
Renesas Technology Taiwan Co., Ltd.
FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology (Shanghai) Co., Ltd.
26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China
Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952
Renesas Technology Singapore Pte. Ltd.
1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
© 2003. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon 1.0
Similar pages