MOTOROLA MHPA18010

Freescale Semiconductor, Inc.
Order this document
by MHPA18010/D
SEMICONDUCTOR TECHNICAL DATA
The RF Line
Freescale Semiconductor, Inc...
Designed for Class AB amplifier applications in 50 ohm systems operating in
the 1800 to 1900 MHz frequency band. A silicon FET design provides
outstanding linearity and gain. In addition, the excellent group delay and phase
linearity characteristics are ideal for digital CDMA and GSM modulation
systems.
• Typical CDMA Performance: 1840 MHz, 28 Volts
IS–95 CDMA Pilot, Sync, Paging, Traffic Codes 8 Through 13
• Adjacent Channel Power: –51 dBc @ 30 dBm Average Power,
885 kHz Channel Spacing
• Power Gain: 24.5 dB Min (@ f = 1840 MHz)
• Excellent Phase Linearity and Group Delay Characteristics
• Ideal for Feedforward Base Station Applications
1805–1880 MHz
10 W, 24.5 dB
RF HIGH POWER LDMOS AMPLIFIER
CASE 301AP–02, STYLE 3
MAXIMUM RATINGS (TC = 25°C unless otherwise noted)
Symbol
Value
Unit
DC Supply Voltage
VDD
30
Vdc
RF Input Power (Single Carrier CW)
Pin
+20
dBm
Storage Temperature Range
Tstg
–40 to +100
°C
Operating Case Temperature Range
TC
–20 to +100
°C
Rating
ELECTRICAL CHARACTERISTICS (VDD = 28 Vdc, VBIAS ≅ 8 V Set for Supply Current of 600 mA, TC = 25°C, 50 Ω System)
Characteristic
Supply Current
Symbol
Min
Typ
Max
Unit
IDD
—
600
—
mA
Power Gain
(f = 1840 MHz)
Gp
24.5
25.5
—
dB
Gain Flatness
(f = 1805–1880 MHz)
GF
—
0.2
0.5
dB
Power Output @ 1 dB Comp.
(f = 1840 MHz)
P1dB
—
41.5
—
dBm
Input VSWR
(f = 1805–1880 MHz)
VSWRin
—
1.5:1
2:1
Noise Figure
(f = 1840 MHz)
NF
—
8
10
dB
ACPR
—
–58
–51
dBc
Adjacent Channel Power Rejection @ 30 dBm Average Power,
1.23 MHz BW, 885 kHz Channel Spacing
REV 0
MOTOROLA
RF DEVICE DATA
 Motorola,
Inc. 2003
For More Information On This Product,
Go to: www.freescale.com
MHPA18010
1
Freescale Semiconductor, Inc.
PACKAGE DIMENSIONS
A
A
2X
G
R
1
2
3
4
K
DIM
A
B
C
D
E
F
G
H
J
K
L
N
P
Q
R
S
W
W
4X
D
$
N
L
Freescale Semiconductor, Inc...
H
F
E
C
4X
P
S
J
S
B
Q
#
T
SEATING
PLANE
INCHES
MIN
MAX
!"
!#
!
"
!
#
#"$
"$
$
""
#
"
$
$
#
#
"
$
MILLIMETERS
MIN
MAX
!
#
"
"!
#
#$
$
!!$
"!"
!
#
$
$
#
$
%
&$
&
%%
%
CASE 301AP–02
ISSUE C
Information in this document is provided solely to enable system and software implementers to use Motorola products. There are no express or implied copyright
licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document.
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including
“Typicals”, must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the
rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part.
MOTOROLA and the Stylized M Logo are registered in the US Patent and Trademark Office. All other product or service names are the property of their respective
owners. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
E Motorola Inc. 2003
HOW TO REACH US:
USA/EUROPE/LOCATIONS NOT LISTED:
Motorola Literature Distribution
P.O. Box 5405, Denver, Colorado 80217
1–800–521–6274 or 480–768–2130
JAPAN: Motorola Japan Ltd.; SPS, Technical Information Center,
3–20–1, Minami–Azabu, Minato–ku, Tokyo 106–8573, Japan
81–3–3440–3569
ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre,
2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong
852–26668334
HOME PAGE: http://motorola.com/semiconductors
MHPA18010
2
MOTOROLA RF DEVICE DATA
◊For More Information On This Product,
Go to: www.freescale.com
MHPA18010/D