MOTOROLA MHW7222A

Order this document
by MHW7222A/D
SEMICONDUCTOR TECHNICAL DATA
The RF Line
The MHW7222A is designed specifically for up to 750 MHz CATV systems as
amplifiers in trunk and line extender applications. This amplifier features
ion–implanted, arsenic emitter transistors, an all gold metallization system and
offers improved ruggedness and distortion performance.
• Specified for 110–Channel Performance
• Broadband Power Gain — @ f = 40 – 750 MHz
Gp = 22.3 dB Typ @ 750 MHz
• Broadband Noise Figure
NF = 5.5 dB Typ
• All Gold Metallization
22 dB GAIN
750 MHz
110 CHANNEL
CATV AMPLIFIER
CASE 714Y–03, STYLE 1
ABSOLUTE MAXIMUM RATINGS
Rating
Symbol
Value
Unit
VCC
+ 28
Vdc
RF Input Voltage (Single Tone)
Vin
+ 70
dBmV
Operating Case Temperature Range
TC
– 20 to +100
°C
Storage Temperature Range
Tstg
– 40 to +100
°C
DC Supply Voltage
ELECTRICAL CHARACTERISTICS (VCC = 24 Vdc, TC = + 30°C, 75 Ω system unless otherwise noted)
Characteristic
Symbol
Min
Typ
Max
Unit
BW
40
—
750
MHz
f = 50 MHz
f = 750 MH
Gp
20.8
22
21.5
22.3
22.2
24
dB
S
0
1
2
—
(f = 40 – 750 MHz)
Gf
—
0.4
0.6
—
IRL/ORL
20
24
—
dB
RLD
—
—
0.008
dB/MHz
CSO110
CSO77
—
—
– 65
– 65
– 57
—
Frequency Range
Power Gain
Slope (f = 40 – 750 MHz)
Gain Flatness (Peak To Valley)
Input/Output Return Loss @ f = 40 MHz
Derate Return Loss @ f > 40 MHz
Composite Second Order
(Vout = + 40 dBmV/ch; 110 Channels)
(Vout = + 44 dBmV/ch; 77 Channels)
dB
(continued)
REV 2
RF DEVICE DATA
MOTOROLA
Motorola, Inc. 1997
MHW7222A
1
ELECTRICAL CHARACTERISTICS — continued
Characteristic
Symbol
Min
Typ
Max
Cross Modulation Distortion
(Vout = + 40 dBmV/ch, 110–Channel @ Fm = 55.25 MHz)
(Vout = + 44 dBmV/ch, 77–Channel @ Fm = 55.25 MHz)
XMD110
XMD77
—
—
– 64
– 60
– 60
—
Composite Triple Beat
(Vout = + 40 dBmV/ch, 110–Channels, Worst Case)
(Vout = + 44 dBmV/ch, 77–Channels, Worst Case)
CTB110
CTB77
—
—
– 63
– 62
– 60
—
NF
—
—
3.6
5.5
5
7
dB
IDC
180
220
240
mA
Noise Figure
Unit
dBc
dBc
f = 50 MHz
f = 750 MHz
DC Current
PACKAGE DIMENSIONS
Q 2 PL
–A–
S
–Z–
–F–
0.25 (0.010)
T F
M
M
A
M
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
V
J
R
B
0.25 (0.010)
M
Z T A
M
6–32UNC–2B
Y 2 PL
1 2
3
2 PL
0.25 (0.010)
U
5
7 8 9
M
Z T A
M
C
N
K
–E–
W
–T–
X
G
P
D 7 PL
L
–X–
0.51 (0.020)
M
T A
M
CASE 714Y–03
ISSUE D
X
DIM
A
B
C
D
E
F
G
J
K
L
N
P
Q
R
S
U
V
W
X
Y
INCHES
MIN
MAX
––––
1.775
1.085
––––
––––
0.840
0.018
0.022
0.465
0.510
0.300
0.325
0.100 BSC
0.156 BSC
0.315
0.355
1.00 BSC
0.165 BSC
0.100 BSC
0.148
0.168
––––
0.600
1.500 BSC
0.200 BSC
–––
0.250
0.435
0.450
0.400 BSC
0.152
0.163
STYLE 1:
PIN 1.
2.
3.
4.
5.
6.
7.
8.
9.
MILLIMETERS
MIN
MAX
––––
45.08
27.56
––––
––––
21.34
0.46
0.56
11.81
12.95
7.62
8.25
2.54 BSC
3.96 BSC
8.00
8.50
25.40 BSC
4.19 BSC
2.54 BSC
3.76
4.27
––––
15.24
38.10 BSC
5.08 BSC
–––
6.35
11.05
11.43
10.16 BSC
3.85
4.15
RF INPUT
GROUND
GROUND
DELETED
VDC
DELETED
GROUND
GROUND
RF OUTPUT
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Affirmative Action Employer.
Mfax is a trademark of Motorola, Inc.
How to reach us:
USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;
P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447
JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4–32–1,
Nishi–Gotanda, Shinagawa–ku, Tokyo 141, Japan. 81–3–5487–8488
Customer Focus Center: 1–800–521–6274
Mfax: [email protected] – TOUCHTONE 1–602–244–6609
ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
Motorola Fax Back System
– US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
– http://sps.motorola.com/mfax/
HOME PAGE: http://motorola.com/sps/
MHW7222A
2
◊
MHW7222A/D
MOTOROLA RF DEVICE
DATA