Vishay BYM10-400 Surface mount glass passivated junction rectifier Datasheet

BYM10-50 thru BYM10-1000, GL41A thru GL41Y
Vishay General Semiconductor
Surface Mount Glass Passivated Junction Rectifier
FEATURES
• Superectifier structure for high reliability condition
• Ideal for automated placement
SUPERECTIFIER®
• Low forward voltage drop
• Low leakage current
• High forward surge capability
• Meets environmental standard MIL-S-19500
• Meets MSL level 1, per J-STD-020, LF maximum peak of
250 °C
DO-213AB
• AEC-Q101 qualified
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
TYPICAL APPLICATIONS
For use in general purpose rectification of power supplies,
inverters, converters and freewheeling diodes for consumer,
automotive and telecommunication.
PRIMARY CHARACTERISTICS
IF(AV)
1.0 A
BYM-50-1000
50 V to 1000 V
GL41A-Y
50 V to 1600 V
VRRM
IFSM
30 A
IR
10 μA
EAS
5 mJ
VF
1.1 V, 1.2 V
TJ max.
175 °C
MECHANICAL DATA
Case: DO-213AB, molded epoxy over glass body
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: Two bands indicate cathode end - 1st band
denotes device type and 2nd band denotes repetitive peak
reverse voltage rating
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
BYM
10-50
BYM
10-100
BYM
10-200
BYM
10-400
BYM
10-600
BYM
BYM
10-800 10-1000
STANDARD RECOVERY
DEVICE: 1ST BAND IS WHITE
GL41A
GL41B
GL41D
GL41G
GL41J
GL41K
GL41M
GL41T
GL41Y
Polarity color bands (2nd band)
Gray
Red
Orange
Yellow
Green
Blue
Violet
White
Brown
PARAMETER
UNIT
SYMBOL
Maximum repetitive peak
reverse voltage
VRRM
50
100
200
400
600
800
1000
1300
1600
V
Maximum RMS voltage
VRMS
35
70
140
280
420
560
700
910
1120
V
Maximum DC blocking voltage
VDC
50
100
200
400
600
800
1000
1300
1600
V
Maximum average forward
rectified current (fig. 1)
IF(AV)
1.0
A
Peak forward surge current
8.3 ms single half sine-wave
superimposed on rated load
IFSM
30
A
Document Number: 88546
Revision: 15-Mar-11
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
1
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BYM10-50 thru BYM10-1000, GL41A thru GL41Y
Vishay General Semiconductor
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
BYM
10-50
BYM
10-100
BYM
10-200
BYM
10-400
BYM
10-600
BYM
BYM
10-800 10-1000
GL41A
GL41B
GL41D
GL41G
GL41J
GL41K
UNIT
SYMBOL
STANDARD RECOVERY
DEVICE: 1ST BAND IS WHITE
Maximum full load reverse
current full cycle average
at TA = 75 °C
IR(AV)
Non-repetitive peak reverse
avalanche energy at TJ = 25 °C,
IAS = 1 A, L = 10 mH
EAS
Operating junction and storage
temperature range
TJ, TSTG
GL41M
GL41T
GL41Y
30
μA
5
-
mJ
- 65 to + 175
°C
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
Maximum
instantaneous
forward voltage
Maximum DC
reverse current
at rated DC
blocking
voltage
Typical junction
capacitance
TEST
CONDITIONS
1.0 A
SYMBOL
BYM
10-50
BYM
10-100
BYM
10-200
BYM
10-400
BYM
10-600
BYM
BYM
10-800 10-1000
GL41A
GL41B
GL41D
GL41G
GL41J
GL41K
VF
GL41M
1.1
UNIT
GL41T
GL41Y
1.2
TA = 25 °C
V
10
μA
IR
TA = 125 °C
4.0 V, 1 MHz
50
8.0
CJ
pF
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
Typical thermal resistance
SYMBOL
BYM
10-50
BYM
10-100
BYM
10-200
BYM
10-400
BYM
10-600
BYM
BYM
10-800 10-1000
GL41A
GL41B
GL41D
GL41G
GL41J
GL41K
RJA (1)
75
(2)
30
RJT
GL41M
UNIT
GL41T
GL41Y
°C/W
Notes
(1) Thermal resistance from junction to ambient, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal
(2) Thermal resistance from junction to terminal, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal
www.vishay.com
2
For technical questions within your region, please contact one of the following:
Document Number: 88546
[email protected], [email protected], [email protected]
Revision: 15-Mar-11
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BYM10-50 thru BYM10-1000, GL41A thru GL41Y
Vishay General Semiconductor
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
BYM10-600-E3/96
0.114
96
1500
7" diameter plastic tape and reel
BYM10-600-E3/97
0.114
97
5000
13" diameter plastic tape and reel
GL41J-E3/96
0.114
96
1500
7" diameter plastic tape and reel
GL41J-E3/97
0.114
97
5000
13" diameter plastic tape and reel
BYM10-600HE3/96
(1)
0.114
96
1500
7" diameter plastic tape and reel
BYM10-600HE3/97
(1)
0.114
97
5000
13" diameter plastic tape and reel
GL41JHE3/96 (1)
0.114
96
1500
7" diameter plastic tape and reel
GL41JHE3/97 (1)
0.114
97
5000
13" diameter plastic tape and reel
Note
(1) AEC-Q101 qualified
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
10
GL41A thru GL41M
Instantaneous Forward Current (A)
Average Forward Rectified Current (A)
1.0
0.75
60 Hz
Resistive or
Inductive Load
GL41T thru GL41Y
0.50
0.25
50
75
100
125
150
175
TJ = 25 °C
Pulse Width = 300 µs
1 % Duty Cycle
0.1
0.6
0.8
1.0
1.2
1.4
1.6
Terminal Temperature (°C)
Instantaneous Forward Voltage (V)
Fig. 1 - Forward Current Derating Curve
Fig. 3 - Typical Instantaneous Forward Characteristics
30
10
TJ = TJ Max.
8.3 ms Single Half Sine-Wave
25
20
GL41A thru GL41M
15
10
5.0
Instantaneous Reverse Current (µA)
Peak Forward Surge Current (A)
GL41K thru GL41Y
1
0.01
0.4
0
25
GL41A thru GL41J
TJ = 100 °C
1
0.1
TJ = 25 °C
0.01
0
10
1
100
0
20
40
60
80
100
Number of Cycles at 60 Hz
Percent of Rated Peak Reverse Voltage (%)
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
Fig. 4 - Maximum Non-Repetitive Peak Forward Surge Current
Document Number: 88546
Revision: 15-Mar-11
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
3
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BYM10-50 thru BYM10-1000, GL41A thru GL41Y
Vishay General Semiconductor
100
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
Transient Thermal Impedance (°C/W)
Junction Capacitance (pF)
100
10
1
1
10
100
(
10
1
Mounted on 0.20" x 0.27" (5 mm x 7 mm)
Copper Pad Areas
0.1
0.01
0.1
1
10
100
Reverse Voltage (V)
t - Pulse Duration (s)
Fig. 5 - Typical Junction Capacitance
Fig. 6 - Typical Transient Thermal Impedance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-213AB
Solderable Ends
1st Band
Mounting Pad Layout
0
D2 = D1 +- 0.008
(0.20)
0.138 (3.5) MAX.
D2
0.022 (0.56)
0.018 (0.46)
D1 =
0.105 (2.67)
0.095 (2.41)
0.022 (0.56)
0.018 (0.46)
0.205 (5.2)
0.185 (4.7)
0.118 (3.0) MIN.
0.049 (1.25) MIN.
0.238 (6.0) REF.
1st band denotes type and positive end (cathode)
www.vishay.com
4
For technical questions within your region, please contact one of the following:
Document Number: 88546
[email protected], [email protected], [email protected]
Revision: 15-Mar-11
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
Similar pages