Order this document by MJE8503A/D SEMICONDUCTOR TECHNICAL DATA *Motorola Preferred Device NPN Bipolar Power Transistor POWER TRANSISTORS 5.0 AMPERES 1500 VOLTS — BVCES 80 WATTS The MJE8503A transistor is designed for high voltage, high speed, power switching in inductive circuits where fall time is critical. They are suited for line operated switchmode applications such as: • Switching Regulators • Inverters • Solenoid and Relay Drivers • Motor Controls • Deflection Circuits Featuring • 1500 Volt Collector-Base Breakdown Capability • Fast Switching: 180 ns Typical Fall Times 450 ns Typical Crossover Times 1.2 µs Typical Storage Times • Low Collector-Emitter Leakage Current — 100 µA Max @ 1500 VCES CASE 221A–06 TO–220AB MAXIMUM RATINGS (TC = 25°C unless otherwise noted) Symbol Value Unit Collector-Emitter Voltage VCEO(sus) 700 Vdc Collector-Emitter Voltage VCES 1500 Vdc Collector-Base Voltage VCBO 1500 Vdc Emitter-Base Voltage Rating VEBO 5.0 Vdc Collector Current — Continuous Collector Current — Peak (1) IC 5.0 10 Adc Collector Current — Continuous Collector Current — Peak IB IBM 4.0 4.0 Adc Total Power Dissipation @ TC = 25°C @ TC = 100°C Derate above 25°C PD 80 21 0.8 Watts TJ, Tstg – 65 to +125 °C Symbol Max Unit RθJC 1.25 °C/W TL 275 °C Operating and Storage Temperature Range W/°C THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Case Maximum Lead Temperature for Soldering Purposes 1/8″ from Case for 5 sec. (1) Pulse Test: Pulse Width = 5.0 ms, Duty Cycle < 10%. SWITCHMODE is a trademark of Motorola Inc. This document contains information on a new product. Specifications and information herein are subject to change without notice. Preferred devices are Motorola recommended choices for future use and best overall value. Motorola, Inc. 1995 Motorola Bipolar Power Transistor Device Data 1 MJE8503A ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit VCEO(sus) 700 — — Vdc — — — — 0.1 2.0 OFF CHARACTERISTICS Collector-Emitter Sustaining Voltage (IC = 100 mAdc, IB = 0) Collector Cutoff Current (VCE = 1500 Vdc, VBE = 0, TC = 25°C) (VCE = 1500 Vdc, VBE = 0, TC = 125°C) ICES mAdc Collector Cutoff Current (VCE = 1500 Vdc, RBE = 50 Ohms, TC = 100°C) ICER — — 5.0 mAdc Emitter Cutoff Current (VEB = 6.0 Vdc, IC = 0) IEBO — — 1.0 mAdc SECOND BREAKDOWN Second Breakdown Collector with Base Forward Biased IS/b See Figure 2 ON CHARACTERISTICS DC Current Gain (IC = 1.0 Adc, VCE = 5.0 Vdc) (IC = 4.5 Adc, VCE = 5.0 Vdc) hFE Base-Emitter Saturation Voltage (IC = 2.5 Adc, IB = 1.0 Vdc) (IC = 4.5 Adc, IB = 2.0 Vdc) VBE(sat) Collector-Emitter Saturation Voltage (IC = 2.5 Adc, IB = 1.0 Vdc) (IC = 4.5 Adc, IB = 2.0 Vdc) VCE(sat) — 7.5 2.25 — — — — — — — — 1.5 1.5 — — — — 2.0 3.0 fT — 7.0 — MHz Cob — 125 — pF Delay Time td — 0.06 0.2 µs Rise Time tr — 0.08 2.0 ts — 1.2 4.0 tf — 0.7 2.0 tsv — 1.2 — tc — 0.45 — tfi — 0.18 — Vdc Vdc DYNAMIC CHARACTERISTICS Current-Gain — Bandwidth Product (IC = 0.1 Adc, VCE = 5.0 Vdc, ftest = 1.0 MHz) Output Capacitance (VCB = 10 Vdc, IE = 0, ftest = 0.1 MHz) SWITCHING CHARACTERISTICS Resistive Load (Table 1) Storage Time (IC = 2.5 Adc, IB = 1.0 Adc, VCC = 500 Vdc VBE(off) = 5.0 Vdc, tp = 50 µs) Fall Time Inductive Load (Table 1) Storage Time Crossover Time (IC = 2.5 Adc, IB = 1.0 Adc, Vclamp = 500 Vdc VBE(off) = 5.0 Vdc, tp = 50 µs) Fall Time µs (1) Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤ 2% 2 Motorola Bipolar Power Transistor Device Data MJE8503A 100 10 IC, COLLECTOR CURRENT (AMPS) hFE , DC CURRENT GAIN VCE = 1 V TJ = 25°C 10 1 0.01 0.1 1 10 50 µs 1 ms 1 50 ms 0.1 0.01 0.001 1 10 100 IC, COLLECTOR CURRENT (AMPS) VCE, COLLECTOR VOLTAGE (VOLTS) Figure 1. DC Current Gain Figure 2. Forward Bias Safe Operating Area (FBSOA) Motorola Bipolar Power Transistor Device Data 1000 3 MJE8503A PACKAGE DIMENSIONS –T– B SEATING PLANE C F T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q 1 2 3 U H K Z L R V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. J G D N INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.018 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ––– ––– 0.080 STYLE 1: PIN 1. 2. 3. 4. MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.46 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ––– ––– 2.04 BASE COLLECTOR EMITTER COLLECTOR CASE 221A–06 TO–220AB ISSUE Y Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki, 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315 MFAX: [email protected] – TOUCHTONE (602) 244–6609 INTERNET: http://Design–NET.com HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 4 ◊ Motorola Bipolar Power Transistor Device Data *MJE8503A/D* MJE8503A/D