ZETTLER AZ880-1A-12D 10 a spst / 8 a dpst polarized subminiature power relay monostable or latching Datasheet

AZ880
10 A SPST / 8 A DPST POLARIZED
SUBMINIATURE POWER RELAY
MONOSTABLE OR LATCHING
FEATURES
•
•
•
•
Dielectric strength 4000 Vrms
Single and dual coil latching versions available
Epoxy sealed version available
UL, CUR file E44211
CONTACTS
GENERAL DATA
Arrangement
SPST (1 Form A), DPST (2 Form A),
DPST (1 Form A and 1 Form B)
Ratings
Resistive load:
Max. switched power: 300 W or 2500 VA (SPST)
240 W or 2000 VA (DPST)
Max. switched current: 10 A (SPST)
8 A (DPST)
Max. switched voltage: 150 VDC* or 380 VAC
* Note:
If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Material
Silver nickel [1], silver tin oxide [2],
Gold plating available
Resistance
< 50 miliohms initially
COIL
Power
At Pickup Voltage
(typical)
137 mW (2 coil latching or 2A monostable)
98 mW (1 coil latching or 1A or 1AB monost.)
Max. Continuous
Dissipation
0.75 W at 20°C (68°F) ambient
Temperature Rise
30°C (54°F) at nominal coil voltage
Max. Temperature
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 10 A 250 VAC resistive (SPST)
Operate Time (typical)
5 ms at nominal coil voltage
Release Time (typical)
3 ms at nominal coil voltage
(with no coil suppression)
Set Time (typical)
5 ms at nominal coil voltage
Recommended coil pulse: 20 ms
Reset Time (typical)
4 ms at nominal coil voltage
Recommended coil pulse: 20 ms
Dielectric Strength
(at sea level)
4000
3000
1000
2000
Insulation Resistance
1000 megohms min. at 20°C
500 VDC 50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
At nominal coil voltage
-40°C (-40°F) to 70°C (158°F)
Vibration
0.078” (2.0 mm) DA at 10 to 55 Hz
Shock
20 g functional
100 g destructive
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
6 grams
Packing unit in pcs
20 per plastic tube / 1000 per carton box
105°C (221°F)
NOTES
1.
2.
3.
4.
All values at 20°C (68°F).
Relay may pull in with less than “Must Operate” value.
Relay has fixed coil polarity.
For complete isolation between the relay’s magnetic fields, it is recommended that a .197" (5.0 mm) space be provided between adjacent relays.
5. Relay adjustment may be affected if undue pressure is exerted
on relay case.
6. Specifications subject to change without notice.
7. DPST (1Form A and 1Form B): Both contacts may be closed
simultaneously during transfer at set / reset process.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
Vrms
Vrms
Vrms
Vrms
contact to coil (-1A, -1AB)
coil to contact (-2A)
between open contacts
between contact sets
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-06-17
AZ880
CONTACTS
Rated Load
UL, CUR
1 Form A
10 A at 250 VAC, General use, 100k cycles [2]
10 A at 250 VAC, General use, 30k cycles [1]
10 A at 30 VDC, Resistive, 100k cycles [2]
8 A at 30 VDC, Resistive, 30k cycles [1]
1/3 HP at 250 VAC, 100k cycles [2]
1/3 HP at 250 VAC, 30k cycles [1]
1/4 HP at 125 VAC, 30k cycles [1]
1/4 HP at 125 VAC, 6k cycles [2]
B300 [2]
R300 [2]
2 Form A
8 A at 250 VAC, General use, 100k cycles [2]
8 A at 250 VAC, General use, 30k cycles [2]
8 A at 30 VDC, Resistive, 100k cycles [2]
8 A at 30 VDC, Resistive, 30k cycles [1]
600 W 125 VAC, Tungsten, 30k cycles [2]
1/3 HP at 250 VAC, 100k cycles [2]
1/3 HP at 250 VAC, 30k cycles [1]
1/4 HP at 125 VAC, 30k cycles [1][2]
B300 [2]
R300 [2]
1 Form A and 1 Form B
8 A at 250 VAC, General use, 30k cycles [1][2]
8 A at 30 VDC, Resistive, 30k cycles [1][2]
1/3 HP at 250 VAC, 30k cycles [1][2]
1/4 HP at 125 VAC, 30k cycles [1]
1/4 HP at 125 VAC, 6k cycles [2]
B300 [2]
R300 [2]
All values at 70°C ambient
RELAY ORDERING DATA
AZ880
COIL SPECIFICATIONS - 1 FORM A AND 1 FORM A / 1 FORM B
Nominal
Coil
VDC
3
Must
Operate
VDC
2.1
Max. Continuous
VDC
5
3.5
6
9
ORDER NUMBER*
5.8
Coil
Resistance
± 10%
45
1 Form A
1 Form B
AZ880-1A-3D
AZ880-1AB-3D
9.7
125
AZ880-1A-5D
AZ880-1AB-5D
4.2
11.6
180
AZ880-1A-6D
AZ880-1AB-6D
6.3
17.4
405
AZ880-1A-9D
AZ880-1AB-9D
12
8.4
23.2
720
AZ880-1A-12D
AZ880-1AB-12D
24
16.8
46.5
2880
AZ880-1A-24D
AZ880-1AB-24D
1 Form A
*Add “E” after “1A” or “1AB” for silver tin oxide contacts. Add suffix “E” for epoxy sealed version. Add suffix “A” for gold plated contacts.
Add suffix “R” for reversed polarity coil.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-06-17
AZ880
RELAY ORDERING DATA
AZ880
COIL SPECIFICATIONS - 2 FORM A
ORDER NUMBER*
Nominal
Coil
VDC
3
Must
Operate
VDC
2.1
Max. Continuous
VDC
4.9
Coil
Resistance
± 10%
32.1
5
3.5
AZ880-2A-3D
8.2
89.3
AZ880-2A-5D
6
9
4.2
9.8
129
AZ880-2A-6D
6.3
14.7
289
AZ880-2A-9D
2 Form A
12
8.4
19.6
514
AZ880-2A-12D
24
16.8
39.3
2056
AZ880-2A-24D
*Add “E” after “2A” for silver tin oxide contacts. Add suffix “E” for epoxy sealed version. Add suffix “A” for gold plated contacts.
Add suffix “R” for reversed polarity coil.
AZ880P1
COIL SPECIFICATIONS - SINGLE COIL LATCHING
Nominal
Coil
VDC
3
Must
Operate
VDC
2.1
Max. Continuous
VDC
5
3.5
6
9
ORDER NUMBER*
5.8
Coil
Resistance
± 10%
45
AZ880P1-1A-3D
AZ880P1-2A-3D
AZ880P1-1AB-3D
9.7
125
AZ880P1-1A-5D
AZ880P1-2A-5D
AZ880P1-1AB-5D
4.2
11.6
180
AZ880P1-1A-6D
AZ880P1-2A-6D
AZ880P1-1AB-6D
6.3
17.4
405
AZ880P1-1A-9D
AZ880P1-2A-9D
AZ880P1-1AB-9D
12
8.4
23.2
720
AZ880P1-1A-12D
AZ880P1-2A-12D
AZ880P1-1AB-12D
24
16.8
46.5
2880
AZ880P1-1A-24D
AZ880P1-2A-24D
AZ880P1-1AB-24D
1 Form A
2 Form A
1 Form A / 1 Form B
*Add “E” after “1A” or “1AB” or “2A” for silver tin oxide contacts. Add suffix “E” for epoxy sealed version. Add suffix “A” for gold plated contacts.
Add suffix “R” for reversed polarity coil.
AZ880P2
COIL SPECIFICATIONS - DUAL COIL LATCHING
ORDER NUMBER*
Nominal
Coil
VDC
3
Must
Operate
VDC
2.1
Max. Continuous
VDC
AZ880P2-1A-3D
AZ880P2-2A-3D
AZ880P2-1AB-3D
5
3.5
8.2
89.3
AZ880P2-1A-5D
AZ880P2-2A-5D
AZ880P2-1AB-5D
6
4.2
9.8
129
AZ880P2-1A-6D
AZ880P2-2A-6D
AZ880P2-1AB-6D
4.9
Coil
Resistance
± 10%
32.1
1 Form A
2 Form A
1 Form A / 1 Form B
9
6.3
14.7
289
AZ880P2-1A-9D
AZ880P2-2A-9D
AZ880P2-1AB-9D
12
8.4
19.6
514
AZ880P2-1A-12D
AZ880P2-2A-12D
AZ880P2-1AB-12D
24
16.8
39.3
2056
AZ880P2-1A-24D
AZ880P2-2A-24D
AZ880P2-1AB-24D
*Add “E” after “1A” or “1AB” or “2A” for silver tin oxide contacts. Add suffix “E” for epoxy sealed version. Add suffix “A” for gold plated contacts.
Add suffix “R” for reversed polarity coil.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-06-17
AZ880
MECHANICAL DATA
Outline Dimensions
Monostable and 1 coil latching
-2A, -1AB
-1A
.591MAX
[15.0]
0.795MAX
[20.2]
.591MAX
[15.0]
.795MAX
[20.2]
.402MAX
[10.20]
.402MAX
[10.20]
.134
[3.40]
.048
[1.22]
.134
[3.40]
.048
[1.22]
.400
[10.16]
.300
[7.62]
.400
[10.16]
4 x .016 x .031
4 x [.40 x .80]
.400
[10.16]
.400
[10.16]
.300
[7.62]
6 x .016 x .031
6 x [.40 x .80]
-1A
2 coil latching
.795MAX
[20.2]
-2A, -1AB
.795MAX
[20.2]
.591MAX
[15.0]
.591MAX
[15.0]
.402MAX
[10.20]
.402MAX
[10.20]
.134
[3.40]
.134
[3.40]
.400
[10.16]
.300
[7.62]
PC Board Layout
Wiring Diagrams
Monostable (Denergized condition)
Monostable and 1 coil latching
.300
[7.62]
.400
[10.16]
.300
[7.62]
.100
[2.54]
+
+
1 coil latching (Reset condition)
-1A
-
.300
[7.62]
-1AB
-2A
+
-
set
6-Ø.047
[Ø1.20]
.300
[7.62]
+
-2A, -1AB
2 coil latching
.100
[2.54]
-
reset
4-Ø.047
[Ø1.20]
-
set
-1A
-1AB
-
+
-
set
.400
[10.16]
-2A
-1A
.300
[7.62]
reset
.400
[10.16]
.400
[10.16]
.300
[7.62]
8 x .016 x .031
8 x [.40 x .80]
6 x .016 x .031
6 x [.40 x .80]
.400
[10.16]
.100
[2.54]
.400
[10.16]
.048
[1.22]
reset
.048
[1.22]
.100
[2.54]
.400
[10.16]
+
-
+
-
+
-
+
.300
[7.62]
2 coil latching (Reset condition)
-2A
6-[Ø.047]
[Ø1.20]
-
reset
set
reset
+
+
-1AB
-
set
-
reset
-2A, -1AB
-1A
-
set
-1A
-
-
+
+
+
+
8-[Ø.047]
[Ø1.20]
Viewed toward terminals
Viewed toward terminals
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-06-17
Similar pages