W005G - W10G W005G - W10G Features • Surge overload rating: 50 amperes peak. • Glass passivated junction. • Ideal for printed circuit board. • Reliable low cost construction technique results in inexpensive product. ~ ~- + • UL certified, UL #E96005. WOB Bridge Rectifiers (Glass Passivated) Absolute Maximum Ratings* Symbol TA = 25°C unless otherwise noted Value Parameter 005G 01G 02G 04G Units 06G 08G 10G VRRM Maximum Repetitive Reverse Voltage 50 100 200 400 600 800 1000 V VRMS Maximum RMS Bridge Input Voltage 35 70 140 280 420 560 700 V VR DC Reverse Voltage 50 100 200 400 600 800 1000 V IF(AV) Average Rectified Forward Current, @ TA = 50°C Non-repetitive Peak Forward Surge Current 8.3 ms Single Half-Sine-Wave Storage Temperature Range -55 to +150 °C Operating Junction Temperature -55 to +150 °C Value Units 3.47 W 36 °C/W 11 °C/W IFSM Tstg TJ (Rated VR) 1.5 A 50 A *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Thermal Characteristics Symbol Parameter PD Power Dissipation RθJA Thermal Resistance, Junction to Ambient,* per leg Thermal Resistance, Junction to Lead,* per leg RθJL *Device mounted on PCB with 0.375" (9.5 mm) lead length. Electrical Characteristics Symbol TA = 25°C unless otherwise noted Device Units VF Forward Voltage, per bridge @ 1.0 A 1.0 V IR Reverse Current, total bridge @ rated VR TA = 25°C TA = 125°C I2t rating for fusing t < 8.3 ms 5.0 500 µA µA 10 A2s 15 pF CT Parameter Total Capacitance, per leg VR = 4.0 V, f = 1.0 MHz 2001 Fairchild Semiconductor Corporation W005G - W10G, Rev. C (continued) 2 1.5 1 0.5 SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD .375" (9.0mm) LEAD LENGTHS 0 25 50 75 100 125 150 Ambient Temperature [ºC] 175 Figure 1. Forward Current Derating Curve Peak Forward Surge Current, IFSM [A] Average Rectified Forward Current, IF [A] Typical Characteristics 50 40 30 20 10 0 1 2 5 10 20 Number of Cycles at 60Hz 50 100 Figure 2. Non-Repetitive Surge Current 20 10 Reverse Current, IR [mA] Forward Current, IF [A] 10 1 TA = 25º C µs Pulse Width = 300µ 2% Duty Cycle 0.1 0.01 0 0.2 0.4 0.6 0.8 1 Forward Voltage, VF [V] 1.2 1.4 Figure 3. Forward Voltage Characteristics 2001 Fairchild Semiconductor Corporation T A = 100 º C 1 0.1 TA = 25º C 0.01 0 20 40 60 80 100 120 140 Percent of Rated Peak Reverse Voltage [%] Figure 4. Reverse Current vs Reverse Voltage W005G - W10G, Rev. C W005G - W10G Bridge Rectifiers (Glass Passivated) TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ DenseTrench™ DOME™ EcoSPARK™ E2CMOSTM EnSignaTM FACT™ FACT Quiet Series™ FAST FASTr™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ ISOPLANAR™ LittleFET™ MicroFET™ MicroPak™ MICROWIRE™ OPTOLOGIC™ OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench QFET™ QS™ QT Optoelectronics™ Quiet Series™ SILENT SWITCHER SMART START™ STAR*POWER™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ TruTranslation™ UHC™ UltraFET VCX™ STAR*POWER is used under license DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant into support device or system whose failure to perform can the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life failure to perform when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. H4