Emcore MAFA3032-EC-P-2 Erbium doped fiber micro amplifier Datasheet

MAFA 3000 Series EDFA
DATASHEET | AUGUST 2012
FIBER OPTICS
MAFA 3000 Series Erbium Doped Fiber Micro Amplifier
EMCORE’s MAFA 3000 Series Erbium Doped Fiber Amplifier (EDFA) Gain Block
Module is an ideal building block for OEM system integrators. The family of MAFA
3000 EDFA Gain Blocks is designed to meet the most demanding noise
performance requirements of special and CATV applications, and performs all the
functions required of a high power optical amplifier for system integration.
Applications
High Performance Supertrunking Links
MAFA 3000 series EDFA Gain Blocks provide optical isolation on the input and
output of the gain block for stable, low noise operation. The input and output
optical signal power levels are detected for monitoring and control. The input
optical signal is amplified with active gain control for a constant output power level
or with active output power control for constant gain mode operation.
High Power Distribution Networks
Redundant Ring Architectures
FTTx Networks
Fiber Deep Architectures
The MAFA 3000 series EDFA Gain Blocks also provide monitors and associated
alarms for all vital characteristics. The optical output of the MAFA 3000 series
EDFA Gain Blocks can be split into multiple ports by an optional external splitter.
Small mechanical footprint allows using this unit in very tight space environments.
Features
Full Function Fiber Optic Amplifier
Ready for Integration
Low Noise Figure (Typ < 6.0 dB)
Pin: -10 dBm to +12 dBm
Pout: +27 dBm to +37 dBm
Standard RS-232 Communication
Low Electrical Power Consumption
Input/Output Isolation >40/40 dB
Polarization Dependant Gain (PDG)
< 0.1 dB
Polarization Mode Dispersion (PMD)
< 0.5 ps
Input & Output Return Losses < -40 dB
Wavelength: 1545 nm to 1562 nm
| REV 2012.08
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
MAFA 3000 Series EDFA
FIBER OPTICS
DATASHEET | AUGUST 2012
Optical/Electrical Characteristics1
Property
Operating Input
Power
Operating Input
Power
Unit
Models
Limit
Comments
3037
3030
3032
3033
3035
3037
Pin (dBm)
Max
12
12
12
12
12
12
Pin (dBm)
Min
-10
-10
-10
-10
-10
-10
Typical
(May vary for some models)
Output Power
Po(dBm)
Nominal
27.0
30.0
32.0
35.0
35.0
37.0
Note 2
Noise Figure
NF (dB)
Typ/Max
5.5/6.0
5.5/6.0
5.5/6.0
5.5/6.0
5.5/6.0
5.5/6.0
(Notes 3)
ΔGs (dB)
Max
+/-2.0
+/-2.0
+/-2.0
+/-2.0
+/-2.0
+/-2.0
(Notes 4)
ΔGd (dB)
Max
+/-2.5
+/-2.5
+/-2.5
+/-2.5
+/-3.0
+/-3.0
(Notes 5)
(dB)
Max
+/- 0.2
+/- 0.2
+/- 0.2
+/- 0.2
+/- 0.2
+/-0.2
(Note 6)
Psys(W)
Max
20
12
28
18
35
25
45
35
48
38
55
45
70 C Case (Premium)
o
55 C (Economy)
Prp(dBm)
Nom
< -30
< -30
< -30
< -30
< -30
< -30
Static Gain
Flatness
Dynamic Gain
Flatness
Output Power
Stability
Power
Consumption
(Steady state)
Remnant Pump
Power to Output
o
Notes:
1. Unless stated otherwise, all specifications apply over the full operating temperature and humidity ranges
2. Depending on the fiber optic patchcord interface the measured value can vary up to 0.5 dB from the actual value.
3. Measured with input optical signal with Pin ≈ 0 dBm and  ≈ 1550 nm @ 25C. May vary for some models.
4. Measured with a swept Probe Signal (Pp), where Pp ≈ 0 dBm @ 25C. May vary for some models.
5. Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ ~ 1550 nm; (Pt ≈ Pp+20 dB; Pt + Pp ≈ 0 dBm)
@ 25C
6. Over polarization and specified temperature range.
7. Premium version – MAFA (with cooled pumps).
Economy version – MAFA (with uncooled pumps).
General and Mechanical Specifications
Property
Requirement
Comments
Operating Wavelength
1545 nm ~ 1562 nm
Standard
Operating Case Temperature
-40C to 75C
-10C to 65C
-40C to 85C
Premium
Economy
20% to 85%
Non-condensing
Storage Temperature
Operating Humidity
+5.0V +/-5%
Voltage Supply Range
+24V +/-5%
Optical Connectors
SC/APC; FC/APC; E2000/APC
Dimensions (in)
9.5”W x 6.7”D x 1.5”H
All versions
All versions
(efficiency: 75% for MAFA 3030; 90% for MAFA 3037)
User Specified (for MAFA 3032, MAFA 3033, MAFA 3035 and
MAFA 3037, if used separately, only special high power
patchcord is absolutely recommended)
MAFA 3030 to MAFA 3037
Unit height depends on heatsink used
| REV 2012.08
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
MAFA 3000 Series EDFA
FIBER OPTICS
DATASHEET | AUGUST 2012
Outline Drawing
Electrical Connector Pinout
PIN #
Designation
PIN #
Designation
1
DC Power Input (+5V/+24V)
16
GND
2
DC Power Input (+5V/+24V)
17
GND
3
DC Power Input (+5V/+24V)
18
RS-232 Tx
4
DC Power Input (+5V/+24V)
19
Reserved*
5
KEY-SWITCH
20
Output Optical Power Mute
6
Reserved*
21
Amplifier Disable Input
7
Reserved*
22
RS-232 Rx
8
Reserved*
23
Reserved*
9
Reserved*
24
DC Power Input (+5V/+24V)
10
Reserved*
25
GND
11
Reserved*
12
DC Power Input (+5V/+24V)
13
GND
14
GND
15
GND
| REV 2012.08
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
MAFA 3000 Series EDFA
FIBER OPTICS
DATASHEET | AUGUST 2012
Compliance and Reliability Information
EN 55013: Sound and Television Broadcast receivers and associated equipment – Radio disturbance characteristics –
limits and methods of measurements – Electric Field Radiation Emissions (2001)
FCC: Subpart B. Part 15 class “A”: Unintentional Radiators
EN 61000-4-3 Radiated Immunity
EN 55020 Conducted Immunity
EN 61000-3-2 Harmonics
EN 50083-2, 1995 with Amendment 1
Fit Rate: 90% level of confidence <3500 @ 30C
Ordering Information
MAFA30
-
-
-
Power Level
Connector Option
27 - 27 dBm
SC - SC/APC
30 - 30 dBm
FC - FC/APC
32 – 32 dBm
EC – E2000/APC
35 – 35 dBm
ECD – E2000/APC Diamond
Class
Power Supply
P – Premium
E - Economy
1 - +5VDC
2 - +24VDC
37 - 37dBm
Example:
MAFA3032-SC-E-1: 32 dBm EDFA Gain Block with SC/APC connectors, Economy pumps, +5VDC Power Supply
Note:
As shown on the outline drawing above the option with 2 optical output ports is also possible.
| REV 2012.08
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
Similar pages