TI1 LP2981IM5-3.6 Micropower 100 ma ultra low-dropout regulator in sot-23 package Datasheet

LP2981-N
www.ti.com
SNOS773K – MARCH 2000 – REVISED APRIL 2013
LP2981-N Micropower 100 mA Ultra Low-Dropout Regulator in SOT-23 Package
Check for Samples: LP2981-N
FEATURES
DESCRIPTION
•
•
•
•
•
•
•
•
•
•
•
The LP2981-N is a 100 mA, fixed-output voltage
regulator designed specifically to meet the
requirements of battery-powered applications.
1
2
Ultra Low Dropout Voltage
Output Voltage Accuracy 0.75% (A Grade)
Specified 100 mA Output Current
< 1 μA Quiescent Current when Shutdown
Low Ground Pin Current at All Load Currents
High Peak Current Capability (300 mA Typical)
Wide Supply Voltage Range (16V Max)
Fast Dynamic Response to Line and Load
Low ZOUT Over Wide Frequency Range
Overtemperature/Overcurrent Protection
−40°C to +125°C Junction Temperature Range
APPLICATIONS
•
•
•
•
Cellular Phone
Palmtop/Laptop Computer
Personal Digital Assistant (PDA)
Camcorder, Personal Stereo, Camera
Using an optimized VIP (Vertically Integrated PNP)
process,
the
LP2981-N
delivers
unequaled
performance in all specifications critical to batterypowered designs:
Dropout Voltage. Typically 200 mV @ 100 mA load,
and 7 mV @ 1 mA load.
Ground Pin Current. Typically 600 μA @ 100 mA
load, and 80 μA @ 1 mA load.
Sleep Mode. Less than 1 μA quiescent current when
ON/OFF pin is pulled low.
Precision Output. 0.75% tolerance output voltages
available (A grade).
Nine voltage options, from 2.5V to 5.0V, are available
as standard products.
Block Diagram
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2000–2013, Texas Instruments Incorporated
LP2981-N
SNOS773K – MARCH 2000 – REVISED APRIL 2013
www.ti.com
Connection Diagram
Figure 1. 5-Lead Small Outline Package (SOT-23)
Top View
See Package Number DBV0005A
PIN DESCRIPTIONS
Name
Pin
Number
Function
VIN
1
Input Voltage
GND
2
Common Ground (device substrate)
ON/OFF
3
Logic high enable input
N/C
4
Post package trim - do not connect to this pin
VOUT
5
Regulated output voltage
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ABSOLUTE MAXIMUM RATINGS (1) (2)
Storage Temperature Range
−65°C to +150°C
Operating Junction Temperature Range
−40°C to +125°C
Lead Temperature (Soldering, 5 sec.)
ESD Rating
260°C
(3)
2 kV
Power Dissipation (4)
Internally Limited
−0.3V to +16V
Input Supply Voltage (Survival)
Input Supply Voltage (Operating)
2.1V to +16V
−0.3V to +16V
Shutdown Input Voltage (Survival)
Output Voltage (Survival (5))
−0.3V to +9V
IOUT (Survival)
Short Circuit Protected
Input-Output Voltage (Survival, (6))
(1)
(2)
(3)
(4)
(5)
(6)
2
−0.3V to +16V
Absolute maximum ratings indicate limits beyond which damage to the component may occur. Electrical specifications do not apply
when operating the device outside of its rated operating conditions.
If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
The ESD rating of pins 3 and 4 for the SOT-23 package is 1 kV.
The maximum allowable power dissipation is a function of the maximum junction temperature, TJ(MAX), the junction-to-ambient thermal
resistance, θJA, and the ambient temperature, TA. The maximum allowable power dissipation at any ambient temperature is calculated
using:
The value of θJA for the SOT-23 package is 220°C/W. Exceeding the maximum allowable power dissipation will cause excessive die
temperature, and the regulator will go into thermal shutdown.
If used in a dual-supply system where the regulator load is returned to a negative supply, the LP2981-N output must be diode-clamped
to ground.
The output PNP structure contains a diode between the VIN and VOUT terminals that is normally reverse-biased. Reversing the polarity
from VIN to VOUT will turn on this diode (see APPLICATION HINTS).
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2981-N
LP2981-N
www.ti.com
SNOS773K – MARCH 2000 – REVISED APRIL 2013
ELECTRICAL CHARACTERISTICS
Limits in standard typeface are for TJ = 25°C, and limits in boldface type applyover the full operating temperature range.
Unless otherwise specified: VIN = VO(NOM) + 1V, CIN = 1 μF, IL = 1 mA, COUT = 4.7 μF,VON/OFF = 2V.
Symbol
ΔVO
VIN–VO
Parameter
Output Voltage Tolerance
Conditions
Min
Max
IL = 1mA
−0.75
0.75
−1.25
1.25
1 mA < IL < 100 mA
−1.0
1.0
−2.0
2.0
−2.5
2.5
−3.5
3.5
VO(NOM) + 1V
Line Regulation
≤ VIN ≤ 16V
Dropout Voltage (2)
IL = 0
ON/OFF Input Voltage (3)
ION/OFF
ON/OFF Input Current
0.007
1
7
IL = 25 mA
70
IL = 100 mA
200
IL = 0
65
IL = 1 mA
80
IL = 25 mA
VON/OFF
LP2981I-XX (1)
Max
Output Voltage
Ground Pin Current
LP2981AI-XX (1)
Min
IL = 1 mA
IGND
Typ
200
0.014
0.014
0.032
0.032
3
3
5
5
10
10
15
15
100
100
150
150
250
250
375
375
95
95
125
125
110
110
170
170
300
300
550
550
800
800
IL = 100 mA
600
1500
1500
VON/OFF < 0.3V
0.01
0.8
0.8
VON/OFF < 0.15V
0.05
2
High = O/P ON
1.4
Low = O/P OFF
0.50
0.15
0.15
VON/OFF = 0
0.01
−1
−1
5
15
15
VON/OFF = 5V
1.6
Units
%VNOM
%/V
mV
μA
2
1.6
V
μA
IO(PK)
Peak Output Current
VOUT ≥ VO(NOM) − 5%
400
en
Output Noise
BW = 300 Hz–50 kHz,
160
μV
Voltage (RMS)
COUT = 10 μF
Ripple Rejection
f = 1 kHz
63
dB
150
mA
150
150
mA
COUT = 10 μF
IO(MAX)
(1)
(2)
(3)
(4)
Short Circuit Current
RL = 0 (Steady State) (4)
Limits are 100% production tested at 25°C. Limits over the operating temperature range are specified through correlation using
Statistical Quality Control (SQC) methods. The limits are used to calculate TI's Average Outgoing Quality Level (AOQL).
Dropout voltage is defined as the input to output differential at which the output voltage drops 100 mV below the value measured with a
1V differential.
The ON/OFF inputs must be properly driven to prevent misoperation. For details, refer to APPLICATION HINTS.
See TYPICAL PERFORMANCE CHARACTERISTICS curve(s).
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2981-N
3
LP2981-N
SNOS773K – MARCH 2000 – REVISED APRIL 2013
www.ti.com
TYPICAL APPLICATION CIRCUIT
*ON/OFF input must be actively terminated. Tie to VIN if this function is not to be used.
**Minimum Output Capacitance is shown to insure stability over full load current range. More capacitance provides
superior dynamic performance and additional stability margin (see APPLICATION HINTS).
***Do not make connections to this pin.
4
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2981-N
LP2981-N
www.ti.com
SNOS773K – MARCH 2000 – REVISED APRIL 2013
TYPICAL PERFORMANCE CHARACTERISTICS
Unless otherwise specified: TA = 25°C, VIN = VO(NOM) + 1V, COUT = 4.7 μF, CIN = 1 μF all voltage options, ON/OFF pin tied to
VIN.
Output Voltage vs
Temperature
Output Voltage vs
Temperature
Figure 2.
Figure 3.
Output Voltage vs
Temperature
Dropout Characteristics
Figure 4.
Figure 5.
Dropout Characteristics
Dropout Characteristics
Figure 6.
Figure 7.
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2981-N
5
LP2981-N
SNOS773K – MARCH 2000 – REVISED APRIL 2013
www.ti.com
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
Unless otherwise specified: TA = 25°C, VIN = VO(NOM) + 1V, COUT = 4.7 μF, CIN = 1 μF all voltage options, ON/OFF pin tied to
VIN.
6
Dropout Voltage vs
Temperature
Dropout Voltage vs
Load Current
Figure 8.
Figure 9.
Ground Pin Current vs
Temperature
Ground Pin Current vs
Load Current
Figure 10.
Figure 11.
Input Current vs VIN
Input Current vs VIN
Figure 12.
Figure 13.
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2981-N
LP2981-N
www.ti.com
SNOS773K – MARCH 2000 – REVISED APRIL 2013
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
Unless otherwise specified: TA = 25°C, VIN = VO(NOM) + 1V, COUT = 4.7 μF, CIN = 1 μF all voltage options, ON/OFF pin tied to
VIN.
Line Transient Response
Line Transient Response
Figure 14.
Figure 15.
Load Transient Response
Load Transient Response
Figure 16.
Figure 17.
Load Transient Response
Load Transient Response
Figure 18.
Figure 19.
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2981-N
7
LP2981-N
SNOS773K – MARCH 2000 – REVISED APRIL 2013
www.ti.com
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
Unless otherwise specified: TA = 25°C, VIN = VO(NOM) + 1V, COUT = 4.7 μF, CIN = 1 μF all voltage options, ON/OFF pin tied to
VIN.
8
Short Circuit Current
Instantaneous Short Circuit
Current vs Temperature
Figure 20.
Figure 21.
Short Circuit Current
Instantaneous Short Circuit
Current vs Output Voltage
Figure 22.
Figure 23.
Output Impedance vs
Frequency
Ripple Rejection
Figure 24.
Figure 25.
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2981-N
LP2981-N
www.ti.com
SNOS773K – MARCH 2000 – REVISED APRIL 2013
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
Unless otherwise specified: TA = 25°C, VIN = VO(NOM) + 1V, COUT = 4.7 μF, CIN = 1 μF all voltage options, ON/OFF pin tied to
VIN.
Output Noise Density
Output Impedance vs
Frequency
Figure 26.
Figure 27.
Input to Output Leakage
vs Temperature
Output Reverse Leakage vs
Temperature
Figure 28.
Figure 29.
Turn-On Waveform
Turn-Off Waveform
Figure 30.
Figure 31.
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2981-N
9
LP2981-N
SNOS773K – MARCH 2000 – REVISED APRIL 2013
www.ti.com
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
Unless otherwise specified: TA = 25°C, VIN = VO(NOM) + 1V, COUT = 4.7 μF, CIN = 1 μF all voltage options, ON/OFF pin tied to
VIN.
10
ON/OFF Pin Current vs
VON/OFF
ON/OFF Threshold
vs Temperature
Figure 32.
Figure 33.
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2981-N
LP2981-N
www.ti.com
SNOS773K – MARCH 2000 – REVISED APRIL 2013
APPLICATION HINTS
EXTERNAL CAPACITORS
Like any low-dropout regulator, the external capacitors used with the LP2981-N must be carefully selected to
assure regulator loop stability.
Input Capacitor:
An input capacitor whose value is ≥ 1 μF is required with the LP2981-N (amount of capacitance can be increased
without limit).
This capacitor must be located a distance of not more than 0.5″ from the input pin of the LP2981-N and returned
to a clean analog ground. Any good quality ceramic or tantalum can be used for this capacitor.
Output Capacitor:
The output capacitor must meet both the requirement for minimum amount of capacitance and E.S.R. (equivalent
series resistance) value. Curves are provided which show the allowable ESR range as a function of load current
for various output voltages and capacitor values (refer to Figure 34, Figure 35, Figure 36, and Figure 37).
NOTE
Important: The output capacitor must maintain its ESR in the stable region over the full
operating temperature range to assure stability. Also, capacitor tolerance and variation
with temperature must be considered to assure the minimum amount of capacitance is
provided at all times.
This capacitor should be located not more than 0.5″ from the output pin of the LP2981-N and returned to a clean
analog ground.
CAPACITOR CHARACTERISTICS
Tantalum:
Tantalum capacitors are the best choice for use with the LP2981-N. Most good quality tantalums can be used
with the LP2981-N, but check the manufacturer's data sheet to be sure the ESR is in range.
It is important to remember that ESR increases at lower temperatures and a capacitor that is near the upper limit
for stability at room temperature can cause instability when it gets cold.
In applications which must operate at very low temperatures, it may be necessary to parallel the output tantalum
capacitor with a ceramic capacitor to prevent the ESR from going up too high (see below for important
information on ceramic capacitors).
Ceramic:
Ceramic capacitors are not recommended for use at the output of the LP2981-N. This is because the ESR of a
ceramic can be low enough to go below the minimum stable value for the LP2981-N. A 2.2 μF ceramic was
measured and found to have an ESR of about 15 mΩ, which is low enough to cause oscillations.
If a ceramic capacitor is used on the output, a 1Ω resistor should be placed in series with the capacitor.
Aluminum:
Because of large physical size, aluminum electrolytics are not typically used with the LP2981-N. They must meet
the same ESR requirements over the operating temperature range, more difficult because of their steep increase
at cold temperature.
An aluminum electrolytic can exhibit an ESR increase of as much as 50X when going from 20°C to −40°C. Also,
some aluminum electrolytics are not operational below −25°C because the electrolyte can freeze.
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2981-N
11
LP2981-N
SNOS773K – MARCH 2000 – REVISED APRIL 2013
www.ti.com
Figure 34. 5V/3.3 μF ESR Curves
Figure 35. 5V/10 μF ESR Curves
Figure 36. 3V/3.3 μF ESR Curves
12
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2981-N
LP2981-N
www.ti.com
SNOS773K – MARCH 2000 – REVISED APRIL 2013
Figure 37. 3V/10 μF ESR Curves
REVERSE CURRENT PATH
The internal PNP power transistor used as the pass element in the LP2981-N has an inherent diode connected
between the regulator output and input. During normal operation (where the input voltage is higher than the
output) this diode is reverse biased (See Figure 38).
LP2981-N
VIN
VOUT
PNP
GND
Figure 38. LP2981-N Reverse Current Path
However, if the input voltage is more than a VBE below the output voltage, this diode will turn ON and current will
flow into the regulator output. In such cases, a parasitic SCR can latch which will allow a high current to flow into
the VIN pin and out the ground pin, which can damage the part.
The internal diode can also be turned on if the input voltage is abruptly stepped down to a voltage which is a VBE
below the output voltage.
In any application where the output voltage may be higher than the input voltage, an external Schottky diode
must be connected from VIN to VOUT (cathode on VIN, anode on VOUT. See Figure 39), to limit the reverse voltage
across the LP2981-N to 0.3V (see Absolute Maximum Ratings)
SCHOTTKY DIODE
LP2981-N
VIN
VOUT
PNP
GND
Figure 39. Adding External Schottky Diode Protection
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2981-N
13
LP2981-N
SNOS773K – MARCH 2000 – REVISED APRIL 2013
www.ti.com
ON/OFF INPUT OPERATION
The LP2981-N is shut off by pulling the ON/OFF input low, and turned on by driving the input high. If this feature
is not to be used, the ON/OFF input should be tied to VIN to keep the regulator on at all times (the ON/OFF input
must not be left floating).
To ensure proper operation, the signal source used to drive the ON/OFF input must be able to swing above and
below the specified turn-on/turn-off voltage thresholds which specify an ON or OFF state (see ELECTRICAL
CHARACTERISTICS).
The ON/OFF signal may come from either a totem-pole output, or an open-collector output with pull-up resistor to
the LP2981-N input voltage or another logic supply. The high-level voltage may exceed the LP2981-N input
voltage, but must remain within the Absolute Maximum Ratings for the ON/OFF pin.
It is also important that the turn-on/turn-off voltage signals applied to the ON/OFF input have a slew rate which is
greater than 40 mV/μs.
NOTE
IMPORTANT: The regulator shutdown function will not operate correctly if a slow-moving
signal is applied to the ON/OFF input.
14
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2981-N
LP2981-N
www.ti.com
SNOS773K – MARCH 2000 – REVISED APRIL 2013
REVISION HISTORY
Changes from Revision J (April 2013) to Revision K
•
Page
Changed layout of National Data Sheet to TI format .......................................................................................................... 14
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2981-N
15
PACKAGE OPTION ADDENDUM
www.ti.com
24-Oct-2013
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LP2981AIM5-2.5
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
L0CA
LP2981AIM5-2.5/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0CA
LP2981AIM5-3.0/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L05A
LP2981AIM5-3.3
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
L04A
LP2981AIM5-3.3/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L04A
LP2981AIM5-3.6
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
L0JA
LP2981AIM5-3.6/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0JA
LP2981AIM5-5.0
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
L03A
LP2981AIM5-5.0/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L03A
LP2981AIM5X-3.0/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L05A
LP2981AIM5X-3.3
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
L04A
LP2981AIM5X-3.3/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L04A
LP2981AIM5X-3.6/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0JA
LP2981AIM5X-5.0
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
L03A
LP2981AIM5X-5.0/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L03A
LP2981IM5-2.5
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
L0CB
LP2981IM5-2.5/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0CB
LP2981IM5-3.0/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L05B
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
24-Oct-2013
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LP2981IM5-3.3
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
L04B
LP2981IM5-3.3/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L04B
LP2981IM5-3.6/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0JB
LP2981IM5-5.0
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
L03B
LP2981IM5-5.0/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L03B
LP2981IM5X-3.0/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L05B
LP2981IM5X-3.3
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
L04B
LP2981IM5X-3.3/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L04B
LP2981IM5X-3.6/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0JB
LP2981IM5X-5.0
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
L03B
LP2981IM5X-5.0/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L03B
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
Addendum-Page 2
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
24-Oct-2013
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 3
PACKAGE MATERIALS INFORMATION
www.ti.com
23-Sep-2013
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
LP2981AIM5-2.5
SOT-23
DBV
5
1000
178.0
8.4
LP2981AIM5-2.5/NOPB
SOT-23
DBV
5
1000
178.0
LP2981AIM5-3.0/NOPB
SOT-23
DBV
5
1000
178.0
LP2981AIM5-3.3
SOT-23
DBV
5
1000
LP2981AIM5-3.3/NOPB
SOT-23
DBV
5
W
Pin1
(mm) Quadrant
3.2
3.2
1.4
4.0
8.0
Q3
8.4
3.2
3.2
1.4
4.0
8.0
Q3
8.4
3.2
3.2
1.4
4.0
8.0
Q3
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2981AIM5-3.6
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2981AIM5-3.6/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2981AIM5-5.0
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2981AIM5-5.0/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2981AIM5X-3.0/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2981AIM5X-3.3/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2981AIM5X-3.6/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2981AIM5X-5.0/NOPB SOT-23
LP2981AIM5X-3.3
LP2981AIM5X-5.0
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2981IM5-2.5
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2981IM5-2.5/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2981IM5-3.0/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
23-Sep-2013
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
LP2981IM5-3.3
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2981IM5-3.6/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2981IM5-5.0
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2981IM5-5.0/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2981IM5X-3.0/NOPB
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2981IM5X-3.3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2981IM5X-3.3/NOPB
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2981IM5X-3.6/NOPB
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2981IM5X-5.0
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2981IM5X-5.0/NOPB
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
LP2981AIM5-2.5
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2981AIM5-2.5/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2981AIM5-3.0/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2981AIM5-3.3
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2981AIM5-3.3/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2981AIM5-3.6
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2981AIM5-3.6/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
Pack Materials-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
23-Sep-2013
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
LP2981AIM5-5.0
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2981AIM5-5.0/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2981AIM5X-3.0/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2981AIM5X-3.3
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2981AIM5X-3.3/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2981AIM5X-3.6/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2981AIM5X-5.0
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2981AIM5X-5.0/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2981IM5-2.5
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2981IM5-2.5/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2981IM5-3.0/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2981IM5-3.3
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2981IM5-3.6/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2981IM5-5.0
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2981IM5-5.0/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2981IM5X-3.0/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2981IM5X-3.3
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2981IM5X-3.3/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2981IM5X-3.6/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2981IM5X-5.0
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2981IM5X-5.0/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
Pack Materials-Page 3
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
Similar pages