IDT IDT54FCT163ATLB Fast cmos synchronous presettable binary counter Datasheet

IDT54/74FCT163T/AT/CT
FAST CMOS SYNCHRONOUS PRESETTABLE BINARY COUNTER
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
FAST CMOS
SYNCHRONOUS
PRESETTABLE
BINARY COUNTER
IDT54/74FCT163T/AT/CT
FEATURES:
DESCRIPTION:
−
−
−
−
The FCT163T is a high-speed synchronous modulo-16 binary counter
built using an advanced dual metal CMOS technology. They are synchronously presettable for application in programmable dividers and have two
types of count enable inputs plus a terminal count output for versatility in
forming synchronous multi-stage counters. The FCT163T has Synchronous Reset inputs that override counting and parallel loading and allow the
outputs to be simultaneously reset on the rising edge of the clock.
Std., A and C speed grades
Low input and output ≤1µ A (max.)
CMOS power levels
True TTL input and output compatibility
• – VOH = 3.3V (typ.)
• – VOL = 0.3V (typ.)
High drive outputs (-15mA IOH, 48mA IOL)
Meets or exceeds JEDEC standard 18 specifications
Military product compliant to MIL-STD-883, Class B and DESC
listed (dual marked)
Power off disable outputs permit “live insertion”
Available in the following packages:
• Industrial: SOIC, QSOP
• Military: CERDIP, LCC, CERPACK
−
−
−
−
−
FUNCTIONAL BLOCK DIAGRAM
P0
P1
P2
P3
PE
CEP
CET
TC
CP
CP
CP
D CP
CD
Q
D
Q
Q0
Q0
DETAIL
A
DETAIL
A
DETAIL
A
Q1
Q2
Q3
DETAIL A
SR
Q0
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
AUGUST 2000
1
c
1999 Integrated Device Technology, Inc.
DSC-5503/-
IDT54/74FCT163T/AT/CT
FAST CMOS SYNCHRONOUS PRESETTABLE BINARY COUNTER
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
SR
1
16
V CC
CP
2
15
TC
P2
5
P3
6
CEP
GND
13
Q1
12
Q2
11
Q3
7
10
CET
8
9
P1
5
NC
6
P2
P3
Q1
16
NC
7
15
Q2
8
14
Q3
L20-2
Unit
V
VTERM(3)
Terminal Voltage with Respect to GND
–0.5 to VCC+0.5
V
TSTG
Storage Temperature
–65 to +150
°C
–60 to +120
Pin Names
mA
8T-link
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM
RATINGS may cause permanent damage to the device. This is a
stress rating only and functional operation of the device at these or
any other conditions above those indicated in the operational sections
of this specification is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect reliability.
No
terminal voltage may exceed Vcc by +0.5V unless otherwise noted.
13
Description
CEP
Count Enable Parallel Input
CET
Count Enable Trickle Input
CP
Clock Pulse Input (Active Rising Edge)
SR
Synchronous Reset Input (Active LOW)
P0-3
Parallel Data Inputs
PE
Parallel Enable Input (Active LOW)
Q0-3
Flip-Flop Outputs
TC
Terminal Count Output
FUNCTION TABLE(1)
2. Inputs and Vcc terminals only.
3. Outputs and I/O terminals only.
Conditions
VIN = 0V
VOUT = 0V
Typ.
6
8
Max.
10
12
Action on the Rising
Clock Edge(s)
SR
PE
CET
CEP
L
X
X
X
Reset (Clear)
Unit
pF
H
L
X
X
Load (Pn→Qn)
H
H
H
H
Count (Increment)
pF
H
H
L
X
No Change (Hold)
8T-link
H
H
X
L
No Change (Hold)
CAPACITANCE (TA = +25OC, f = 1.0MHz)
Output Capacitance
12
PIN DESCRIPTION
Max.
–0.5 to +7
COUT
11
LCC
TOP VIEW
Rating
Terminal Voltage with Respect to GND
Parameter(1)
Input Capacitance
10
PE
Symbol
VTERM(2)
Symbol
CIN
TC
17
9
ABSOLUTE MAXIMUM RATINGS(1)
DC Output Current
V CC
Q0
CERDIP/ SOIC/ QSOP/ CERPACK
TOP VIEW
IOUT
NC
18
CEP
D16-1
SO16-1
SO16-7
E16-1
P0
19
CET
4
Q0
20
1
PE
P1
14
2
NC
3
3
GND
P0
4
SR
INDEX
CP
PIN CONFIGURATION
NOTE:
1. This parameter is measured at characterization but not tested.
NOTE:
1. H = HIGH Voltage Level
L = LOW Voltage Level
X = Don’t Care
2
IDT54/74FCT163T/AT/CT
FAST CMOS SYNCHRONOUS PRESETTABLE BINARY COUNTER
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE
Following Conditions Apply Unless Otherwise Specified:
Industrial: TA = -40°C to +85°C, VCC = 5.0V ± 5%; Military: TA = –55°C to +125°C, VCC = 5.0V ± 10%
Symbol
VIH
Parameter
Input HIGH Level
Test Conditions(1)
Guaranteed Logic HIGH Level COM’L.(5)
VIL
Input LOW Level
Guaranteed Logic LOW Level
IIH
Input HIGH Current(4)
VCC = Max.
VI = 2.7V
IIL
Input LOW Current(4)
VCC = Max.
VI = 0.5V
—
—
±1
µA
II
Input HIGH Current(4)
VCC = Max., VI = VCC (Max.)
—
—
±1
µA
VIK
Clamp Diode Voltage
VCC = Min., IN = –18mA
—
–0.7
–1.2
V
IOS
Short Circuit Current
VCC = Max.(3), VO = GND
–60
–120
–225
mA
VOH
Output HIGH Voltage
VCC = Min.
VIN = VIH or VIL
2.4
3.3
—
V
2
3
—
—
0.3
0.5
V
—
200
—
mV
—
.01
1
mA
MIL.
VOL
Output LOW Voltage
VH
Input Hysteresis
ICC
Quiescent Power Supply Current
IOH = –6mA MIL
IOH = –8mA IND
IOH = –12mA MIL
IOH = –15mA IND
IOL = 32mA MIL
IOL = 48mA IND
VCC = Min.
VIN = VIH or VIL
—
VCC = Max.
VIN = GND or VCC
Min.
2
Typ.(2)
—
2.7
—
—
Max.
—
Unit
V
—
—
V
—
0.8
V
—
±1
µA
NOTES:
1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 5.0V, +25°C ambient.
3. Not more than one output should be shorted at one time. Duration of the short circuit test should not exceed one second.
4. The test limit for this parameter is ±5µ A at TA = -55°C.
5. Clock pin requires a minimum VIH of 2.5V.
3
IDT54/74FCT163T/AT/CT
FAST CMOS SYNCHRONOUS PRESETTABLE BINARY COUNTER
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
POWER SUPPLY CHARACTERISTICS
Test Conditions(1)
Symbol
∆ICC
Parameter
Quiescent Power Supply Current
TTL Inputs HIGH
ICCD
Dynamic Power Supply Current (4)
VCC = Max., Outputs Open
Load Mode
CEP = CET = PE = GND
SR = VCC
One Input Toggling
50% Duty Cycle
IC
Total Power Supply Current(6)
VCC = Max., Outputs Open
Load Mode
fCP = 10MHz
50% Duty Cycle
CEP = CET = PE = GND
SR = VCC
One Bit Toggling
at fi = 5MHz
50% Duty Cycle
Min.
—
Typ.(2)
0.5
Max.
2
Unit
mA
VIN = VCC
VIN = GND
—
0.15
0.25
mA/
MHz
VIN = VCC
VIN = GND
—
1.5
3.5
mA
VIN = 3.4V
VIN = GND
—
2
5.5
VIN = VCC
VIN = GND
—
3.8
7.3(5)
VIN = 3.4V
VIN = GND
—
5
12.3(5)
VCC = Max.
VIN = 3.4V(3)
VCC = Max., Outputs Open
Load Mode
fCP = 10MHz
50% Duty Cycle
CEP = CET = PE = GND
SR = VCC
Four Bits Toggling
at fi = 5MHz
50% Duty Cycle
NOTES:
1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 5.0V, +25°C ambient.
3. Per TTL driven input (VIN = 3.4V). All other inputs at VCC or GND.
4. This parameter is not directly testable, but is derived for use in Total Power Supply Calculations.
5. Values for these conditions are examples of the ICC formula. These limits are guaranteed but not tested.
6. IC = IQUIESCENT + IINPUTS + IDYNAMIC
IC = ICC + ∆ICC DHNT + ICCD (fCP/2 + fiNi)
ICC = Quiescent Current
∆ICC = Power Supply Current for a TTL High Input (VIN = 3.4V)
DH = Duty Cycle for TTL Inputs High
NT = Number of TTL Inputs at DH
ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL)
fCP = Clock Frequency for Register Devices (Zero for Non-Register Devices)
fi = Input Frequency
Ni = Number of Inputs at fi
All currents are in milliamps and all frequencies are in megahertz.
4
IDT54/74FCT163T/AT/CT
FAST CMOS SYNCHRONOUS PRESETTABLE BINARY COUNTER
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
SWITCHING CHARACTERISTICS OVER OPERATING RANGE
FCT163T
Ind.
Symbol
tPLH
tPHL
Parameter
Propagation Delay
CP to Qn (PE input HIGH)
tPLH
tPHL
tPLH
tPHL
tPLH
tPHL
tSU
tSU
Propagation Delay
CP to Qn (PE input LOW)
Propagation Delay
CP to TC
Propagation Delay
CET to TC
Set-up Time HIGH or LOW
Pn to CP
Hold Time HIGH or LOW
Pn to CP
Set-up Time HIGH or LOW
tH
PE or SR to CP
Hold Time HIGH or LOW
tH
tSU
tH
tW
tW
PE or SR to CP
Set-up Time HIGH or LOW
CEP ir CET to CP
Hold Time HIGH or LOW
CEP ir CET to CP
CP Pulse Width (load)
HIGH or LOW
CP Pulse Width (count)
HIGH or LOW
Condition(1)
CL = 50pF
RL = 500Ω
FCT163AT
Mil.
Ind.
FCT163CT
Mil.
Ind.
Mil.
Min. (2) Max. Min. (2) Max. Min. (2) Max. Min. (2) Max. Min. (2) Max. Min. (2) Max.
Unit
2
11
2
11.5
2
7.2
2
7.5
2
5.8
2
6.3
ns
2
9.5
2
10
2
6.2
2
6.5
2
5.8
2
6.3
ns
2
15
2
16.5
2
9.8
2
10.8
2
7.4
2
8.3
ns
1.5
8.5
1.5
9
1.5
5.5
1.5
5.9
1.5
5.2
1.5
5.6
ns
5
—
5.5
—
4
—
4.5
—
4
—
4.5
—
ns
1.5
—
2
—
1.5
—
2
—
1.5
—
2
—
ns
11.5
—
13.5
—
9.5
—
11.5
—
9.5
—
11.5
—
ns
1.5
—
1.5
—
1.5
—
1.5
—
1.5
—
1.5
—
ns
11.5
—
13
—
9.5
—
11
—
9.5
—
11
—
ns
0
—
0
—
0
—
0
—
0
—
0
—
ns
5
—
5
—
4 (3)
—
4 (3)
—
4 (3)
—
4 (3)
—
ns
7
—
8
—
6
—
7
—
6
—
7
—
ns
NOTES:
1. See test circuits and waveforms.
2. Minimum limits are guaranteed but not tested on Propagation Delays.
3. This limit is guaranteed but not tested.
5
IDT54/74FCT163T/AT/CT
FAST CMOS SYNCHRONOUS PRESETTABLE BINARY COUNTER
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
TEST CIRCUITS AND WAVEFORMS
SWITCH POSITION
TEST CIRCUITS FOR ALL OUTPUTS
V CC
Test
7.0V
Switch
Open Drain
500 Ω
Disable Low
V OUT
V IN
Pulse
Generator
D.U.T.
All Other Tests
50pF
R
Closed
Enable Low
T
C
Open
8-link
500 Ω
DEFINITIONS:
CL = Load capacitance: includes jig and probe capacitance.
RT = Termination resistance: should be equal to ZOUT of the Pulse
Generator.
L
O ctal lin k
PULSE WIDTH
SET-UP, HOLD, AND RELEASE TIMES
3V
1.5V
0V
3V
1.5V
0V
DATA
INPUT
tH
t SU
TIM ING
INPUT
ASYNCHRONOUS C ONTROL
PRES ET
CLEAR
ETC.
SYNCHRO NOUS CONTRO L
PRES ET
CLEAR
CLOCK ENABLE
ETC.
t REM
t SU
LO W -HIGH-LOW
PULSE
1.5V
tW
3V
1.5V
0V
HIGH-LOW -HIGH
PULSE
1.5V
3V
1.5V
0V
tH
O ctal lin k
O ctal lin k
PROPAGATION DELAY
ENABLE AND DISABLE TIMES
ENAB LE
SAM E PHASE
INPUT TRANSITION
t PLH
t PH L
OUTPUT
t PLH
OPPOSITE P HASE
INPUT TRANSITION
t PH L
3V
1.5V
0V
DISA BLE
3V
CO NTROL
INPUT
1.5V
t PZL
V OH
1.5V
V OL
OUTPUT
NO RM A LLY
LO W
3V
1.5V
0V
SW ITCH
CLOSE D
O ctal lin k
SW ITCH
OPEN
3.5V
3.5V
1.5V
0.3V
t PZH
OUTPUT
NO RM A LLY
HIGH
0V
t PLZ
V OL
t PHZ
0.3V
V OH
1.5V
0V
0V
O ctal lin k
NOTES:
1. Diagram shown for input Control Enable-LOW and input Control DisableHIGH
2. Pulse Generator for All Pulses: Rate ≤ 1.0MHz; tF ≤ 2.5ns; tR ≤ 2.5ns
6
IDT54/74FCT163T/AT/CT
FAST CMOS SYNCHRONOUS PRESETTABLE BINARY COUNTER
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
ORDERING INFORMATION
IDT
XX
Temp. Range
FCT
XXXX
XX
X
Device Type
Package
Process
Blank
B
Industrial
MIL-STD-883, Class B
SO
Q
Industrial Options
Small Outline IC (SO16-1)
Quarter-size Small Outline Package (SO16-7)
D
E
L
Military Options
CERDIP (D16-1)
CERPACK (E16-1)
Leadless Chip Carrier (L20-2)
163T
163AT
163CT
Synchronous Presettable Binary Counter
54
74
– 55°C to +125°C
– 40°C to +85°C
CORPORATE HEADQUARTERS
2975 Stender Way
Santa Clara, CA 95054
for SALES:
800-345-7015 or 408-727-6116
fax: 408-492-8674
www.idt.com*
*To search for sales office near you, please click the sales button found on our home page or dial the 800# above and press 2.
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
7
Similar pages